Extra 10% off when buy 2 or more selective itemsShop nowHelp Center
- Engine Rebuild Components
- Gasket and Sealing System
- Engine Bearings
- Valvetrain Parts
- Bolts, Studs, Fasteners
- Pistons, Rings, Rods & Parts
- Timing Components
- Cooling System
- Oil System
- Steering Parts
- EGR Valves & Parts
- Wheel Hubs, Seals, Bearings
King Main Rod Bearings Fit 90-04 Nissan 240SX Altima 2.4 KA24E KA24DE53 reviews SKU #: MA-4216942004In Stock
Ships within 1 business dayBrand:
- High strength overlay plate with reduced thickness for improved fatigue properties
- Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing
- Increased crush for improved bearing retention
- Increased eccentricity to compensate for bore distortion at high RPM and to assist in the formation of hydrodynamic oil films
- Optimize bearing load carrying surface area and oil flow to the conrod bearings
Savings Instant Savings AvailableFree Shipping To lower 48 States24/7 Support Ask product expertsEasy Return Quick, SimplePart Numbers: MB2747, RB2746Please Note: Image is used for display purposes only and may not reflect actual product.Product DetailsProduct DetailsKing Main Rod Bearings Fit 90-04 Nissan 240SX Altima 2.4 KA24E KA24DE. High strength overlay plate with reduced thickness for improved fatigue properties. Hardened steel backs on all rod bearings to improve the support of the bearing lining and assist with bearing retention in the housing. Replace Fel-Pro Part #: MB607, RB607
King Main Rod Bearings Fit 90-04 Nissan 240SX Altima 2.4 KA24E KA24DE. The crankshaft, connecting rods and bearings are extremely important in every engine build, because they convert the reciprocating motion of the pistons into rotational torque. The longer the stroke, the greater the leverage effect and the greater the torque output of the engine. Time will come that your engine bearings will wear out. Always remember, when your engine bearings fail, a replacement bearings should immediately be installed. Be sure to have your crankshaft bearings, and connecting rod bearings replace with our aftermarket engine bearings as soon as it starts to give you trouble.
Fits Following Models:
1989-1990 NISSAN 240SX 2.4L 2389CC SOHC L4, (12 VALVE), ENG CODE \"KA24E\"
1989-1992 NISSAN AXXESS 2.4L 2389CC L4, (12 VALVE), ENG CODE \"KA24E\"
1990-1997 NISSAN D21 PICKUP 2.4L 2389 SOHC L4, (12 VALVE) ENG CODE \"KA24E\"
1989-1992 NISSAN STANZA 2.4L 2389CC SOHC L4, (12 VALVE), ENG CODE \"KA24E\"
1991-1999 NISSAN 240SX 2.4L 2389CC DOHC L4, (16 VALVE), ENG CODE \"KA24DE\"
1993-1997 NISSAN ALTIMA 2.4L 2389CC DOHC L4, (16 VALVE), ENG CODE \"KA24DE\"
1998-2004 NISSAN FRONTIER 2.4L 2389CC DOHC L4, (16 VALVE), ENG CODE \"KA24DE\"
1998-2004 NISSAN XTERRA 2.4L 2389CC DOHC L4, (16 VALVE), ENG CODE \"KA24DE\"
This item includes:
- 1 King Main Bearing Set (STD - Standard Size, or Undersize 0.25mm = 0.010\", 0.50mm = 0.020\")
- 1 King Rod Bearing Set (STD - Standard Size, or Undersize 0.25mm = 0.010\", 0.50mm = 0.020\")
Remark: If you want the oversize(s), please leave us a note in the \"Add Message to Seller\" box that provided when you go to check out. Click the SAVE button in order for you note to be saved, and double check to make sure your note is lodged with your payment. Otherwise we will send you Standard size. For other oversizes please contact us for special order.
KING (King Engine Bearings) are bearing specialists. King Engine Bearings was founded in 1960 with one simple objective: to supply the highest quality bearings available in the marketplace. By specializing in engine bearings, King has built an extensive product offering that includes a wide range of engine bearings for automobiles, light duty and heavy duty trucks, marine, aviation, standby power and many other types of internal combustion engines. Every King bearing utilizes the highest quality materials and the most advanced designs to ensure complete customer satisfaction.
Shipping & Payment Shipping
Free FedEx Ground shipping to within the continental United States (48 states)
Alaska, Hawaii, Puerto Rico, U.S territories, APO/ FPO, Canada and other countries there will be a delivery surcharge.
Orders will be shipped out from Monday to Friday a week (except holiday). Orders placed before 3:00pm PST will be shipped out the same day. However, sometimes due to unfortunate circumstances, we may have to delay shipment for one day.
Tracking numbers will be sent via email within one business days when the order was shipped. If you did not received a tracking number, first check your �spam / junk� folder on your email, if it is not there, please give us a call or send us an message.
For international order: your country�s import duties, taxes and brokerage fees are not include in the shipping fee. Please contact the shipping carrier and your local custom office regarding these fees.
Payment
Please confirm your shipping address in the checkout. If your old address is imported from PayPal, please correct it before completing payment.
We accept PayPal, Visa, Mastercard, American Express and Discover.
An invoice will be sent to the primary email address listed on your profile within 24 hours of purchase or end of sale. If you do not receive this invoice please check your spam / junk email folder and then contact us.
Purchase paid via PayPal will be shipped to the �confirmed� name and address on the buyer�s PayPal account. Please call prior to purchase if you would like to ship to a different name on the address.
eChecks are accepted, but please not that payment can take about 5 business days to clear. We are instructed by PayPal to allow eChecks to clear before shipping product. We will only ship product after eChecks clear, no exceptions.
Warranty & Return Return
30 days Money-Back Guarantee!
If you are not happy with your purchase for any reason ( and the part is brand new, has not been installed or damage in any way) please return it within 30 days for refund, less shipping fees.
Please contact us for a Return Authorization Number (RMA) and return shipping address. Do not return items without and RMA number or the package will be refused and returned to you at your expense.
Return item must be well packed in original manufacturer�s packing and contain everything that was originally provided such as packing materials, hardware, manuals, protective wrap/caps, instruction, etc.
Be sure to write down the package tracking number. If your return is lost or damaged during shipping, we cannot refund you because the item cannot be resold or returned to our supplier. You will have to submit a claim directly to your shipping company requesting compensation.
Refunds are issued approximately 1-2 days after we receive your return. Please allow 1-2 days inspection and processing time before inquiring about the status of your refund.
Piston rings, main bearings, rod bearings cannot be returned if the manufacturer�s seal, or plastic shrink wrapped has been opened. There is no-exceptions policy ensures the quality of the components you receive.
Warranty & Exchange
Mizumo Auto offers a Limited Warranty to entire products to be free from defects in workmanship and material under a normal service conditions for a period of 90 days whichever occurs form the original date of purchase.
The warranty is not transferable, is valid to original purchaser, and limited to the replacement of defective product only.
This Limited Warranty does not cover labor, damaged from accidents, alterations, misuse or modifications not intended by the manufacture, and other expenses such as towing loading fluids, oils or car rentals.
All warranty clams must be pre-authorized and returned prepaid to Mizumo Auto for inspection and approval.
No exchanges will be made for any product that has been damaged, misused or improper installed. We always recommend professional installation of our products.
The buyer assumes risk of damage caused by improper installation.
About Us About Us
Mizumo Auto Providing quality OEM production replacement parts to engine rebuilders, specialty warehouses, and distributors for more than a decade. Our product lines represent affordability, quality, and performance to meet the demands of today�s challenging market. In addition, Mizumo parts meet or exceed the strict standards of QS9000, ISO9001, and ISO9002. Our gasket line is manufactured with non-asbestos materials, the finest silicon rubber, Viton� valve stem seals, and graphite or MLS (multiple layer steel) head gaskets for superior sealing.
Our gasket product line provides our customers with competitive cost coverage on popular late model domestic applications. For all your early to late model import needs we carry a full range of gaskets and internal engine parts in addition to our new product lines of: Timing Belts & Kits, Water Pump, Head Bolts.
Mizumo Auto is located in Southern California, the most diversified import automotive market in the nation, thus, allowing the company to continually study market trends to help forecast future product needs, and enhance development to exceed industry standards of both quality and performance.
Mizumo Auto offers national sales and support services along with a fast program to insure our clients get the parts they need now.
CUSTOMER SERVICE
- Payment Details
- Shipping Us
INFORMATION
- Store Home
- Add to Favourites
- New Arrivals
- Ending - Friday
- 9:00am - 5:30pm (PST)
- Email: via \" contact form\"
Copyright� 2000-2018 Mizumo Auto. All rights reserved.
