Fast-Autos.net


Search for a different part:

Kilmat 80 mil 36 sqft Car Sound Deadening Mat Sound Deadener Material insulation For Sale - New and Used


Kilmat 80 mil 36 sqft Car Sound Deadening Mat Sound Deadener Material insulation


This item has been shown 63035 times.

Buy Now

Kilmat 80 mil 36 sqft Car Sound Deadening Mat Sound Deadener Material insulation:
$60

Car Sound Deadening Shop

How to calculate materials

How to install materials

Kilmat 80 Mil 36 Sqft Car Sound Deadening
  • Brand: Kilmat
  • Part Number: KLM8036
  • Type: Butylbased with AluFoil
  • Exterior: Foil with Kilmat logo
  • Thickness: 80 mil=0.08 inch
  • Total coverage: 36 sqft
  • Number of sheets: 34
  • Sheet size: 9.8x15.7 inch
Features: Best price comparing to other brands The best price for 80 mil automotive butyl and foil sound deadening! KILMAT 80 mil is just $ 1.65 per 1 sqft! You are not just buying an excellent quality product but also saving more than 20 % comparing to Gtmat, Boom Mat and Extreme! It turns out to be more cost-effective solution than such brands as Dynamat Xtreme, Hushmat and Stinger RoadKill as well! The thicker the material the more performance you get!

Don't miss a chance to get an extra 50 % of the quality and efficiency for just 30 % of the price. Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. KILMAT 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil and just 30 % more expensive. The thicker the material the more performance you get!

Material effectively deadens the background noise

Automotive self-adhesive insulation consists of butyl. KILMAT sound deadening has a total weight of 0.5 lbs/1sqft. This weight ensures optimum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. KILMAT 80 mil is light weighted sound deadening material!

Easy, hassle free installation

Audio insulation KILMAT has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you'll be 100% sure that the insulation is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!

Recommended products Recommended products Noico 80 mil 36 sqft Noico 80 mil 18 sqft Noico 80 mil 10 sqft Noico Green 170 mil 18 sqft Quantity of material needed per vehicle class ( in sqft ) Quantity of material needed per vehicle class ( in sqft ) Model of a car Firewall + Floor 4 Doors Roof Trunk Total Subcompact B 26 26 13 24 89 Compact C 28 28 16 26 98 Mid-size D 30 30 16 28 104 Full-size E-F 32 30 17 31 110 Compact SUV 32 32 20 32 116 Mid-size SUV 32 32 27 35 126 Full-size SUV 37 34 32 34 137 Full-size Pickup 28 34 15 0 77

Disclaimer: This calculation is an approximate estimate and might contain some deviations. Please refer to your vehicle instruction guideline for more accurate dimensions.

How to install How to install

Please read the instruction carefully up to the end! This is really important as the efficiency of soundproofing doesn't only depend on the material you use but largely on the installation sequence as well. Please note that incorrect installation of a sound deadening material might lead to undesirable results or no results at all.

1 step

Decide what part of the car you want to insulate first: roof, floor, doors or a hood. The insulation of each parts of the vehicle has its own result and contribution to overall outcome. That’s why we recommend you to soundproof all parts of the car for the maximum soundproofing output. Locate the guideline instruction to your car on the internet and carefully read as to how to dismantle a certain panels. Be careful when you take off plastic trim parts to avoid breaking the fixings! Very detailed information can be found on automotive forums. However, If you have any questions, you can email us and we reply you back with a detailed response within 1-2 working days.

2 step

Remove the remains of the factory insulation once you have dismantled the interior ( you need to do that if the factory sound insulation is damaged or not properly fixed). You can leave it there if it’s still in a good shape. Properly clean and degrease the surface prior to installation of deadener. It has to be dry and clean! It won’t be properly fixed and may not last long if you apply the material on a wet or dirty surface. Use a degreaser and dry clean rag for the Step 4. We also recommend wearing gloves and air the room from time to time while doing it. * Pre-try the degreaser on a small spot before using that on a painted or plastic exterior.

3 step


Measure the pre-cleaned surface of the prospective spot that you are going to treat. We recommend you first make a pattern of an appropriate size on paper and then transfer that to the insulation sheet. This will help you to place everything accurately and avoid wasting the material. Use a stationery knife or construction scissors to trim the desired piece of insulation sheet. Be careful and use gloves for your hand protection.

4 step

Try to locate the piece of material onto the prospective surface of a car without removing an adhesive paper. Make sure that the material covers it. Now it’s time to remove the release paper. Please do not remove it at once. You need to do it gradually for a better adhesion. Now when your sheet is ready to be used, lay that down to the surface and let it glue. Properly flatten the sheet with hands to avoid air bubbles between the metal and insulation material. Use a roller for rolling down the foil as a next step. You can find a special pattern on the foil that helps to see if it's rolled down properly. You have to roll down the foil till it is plain and smooth, and you cannot see the convex foil texture.

It is important! In order to install soundproofing material you would need:
  1. Auto sound deadener KILMAT
  2. Stationery knife or construction scissors
  3. A roller for rolling out sound deadening material
  4. Gloves
  5. Degreaser
  6. A cloth for wiping
  7. A pen for marking
Please note:
  • Material for inside use only
  • The allowed temperature is from -49F to 212F
  • Don’t use the material in high temperature parts of the car such as exhaust pipe
  • The material cannot be reused after dismantled
  • The material can be used only on clean dry metal surfaces
  • Please observe safety precautions

Buy Now



Search for a different part:


Related Cars:



2007 Ferrari 599 GTB Fiorano
2007 Ferrari 599 GTB Fiorano

2012 Dodge Charger SRT8
2012 Dodge Charger SRT8

2005 Nissan Azeal Coupe Concept
2005 Nissan Azeal Coupe Concept

2010 Brabus GLK V12
2010 Brabus GLK V12

2010 Ford Mustang GT
2010 Ford Mustang GT

1993 Ferrari 333 SP
1993 Ferrari 333 SP

2008 Dodge Challenger SRT8
2008 Dodge Challenger SRT8

2010 Hamann Tycoon Evo M
2010 Hamann Tycoon Evo M

2012 Lamborghini Gallardo LP 570-4 Spyder Performante
2012 Lamborghini Gallardo LP 570-4 Spyder Performante

2003 BMW M3 CSL
2003 BMW M3 CSL


Contact | Copyright Information | Privacy Policy & Terms of Use