Fast-Autos.net


Search for a different part:

Jackson Racing TRD Miata Honda Focus Sebring Supercharger Rebuild Kit M62 Gen4 5 For Sale - New and Used


Jackson Racing TRD Miata Honda Focus Sebring Supercharger Rebuild Kit M62 Gen4 5
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

Jackson Racing TRD Miata Honda Focus Sebring Supercharger Rebuild Kit M62 Gen4 5:
$2870.00

Contact us for more information about the custom pulleys we make.Check out the picture of our custom pulley in this item. Pulley shown is not included in this item purchase. The one pictured may not be the exact one available for this vehicle.

The High Speed Lab Supercharger Shop

**Rebuild your Jackson RacingSupercharger, Moss MotorsSupercharger, Sebring Supercharger, TRDSupercharger, CT EngineeringSupercharger, HoldenSupercharger**

This supercharger rebuild service kit is for the Jackson Racing Supercharger Kit with the aftermarket Eaton M62 Gen4 and M62 Gen5 Supercharger


Buy this item to receive aDo-It-Yourself Supercharger Rebuild Service Kit utilizing our core exchange service.


Do-It-Yourself Supercharger Rebuild Service Kit withCore exchange deposit

Buy this item and our kit ships out before your core rotor assembly is received.

Core exchange deposit refund available with the receipt of a rebuildable core rotor assembly and damaged parts will result in deductions.


  1. A Genuine Eaton M62 Gen4 / M62 Gen5 Rotor Assembly that has been professionally re-manufactured with new rotor coating, timing gears installed, ready to be slid into supercharger housing by you or a technician. It will come with our Complete Supercharger Nosedrive Rebuild Kit with all the parts and materials to complete the rest of the complete supercharger rebuilding service yourself. This FREE parts and materials kit includes:
  2. FREE Eaton snout nose drive rebuild kit with housing needle bearings ($165 value):
    1. Two AC Delco supercharger oil, 4 ounce bottles (2)
    2. Permatex anaerobic gasket maker for aluminum flanges, a red sealer (1)
    3. Eaton coupler, prepared with installation grease (1)
    4. Brand name Premium back nosedrive ball bearing (1)
    5. Brand name Premium front nosedrive ball bearing (1)
    6. Brand name Premium Viton front nosedrive seal with double-seal internal diameter, prepared with installation grease and oil on internal diameter of the lips of the seal. (1)
    7. Nosedrive Rotoclip, a quality replacement of original wire retaining clip (1)
    8. Plastic Syringe with tubing for oil extraction (1)
    9. Needle Bearing Pair, Single-seal* cup-type needle bearings, to install sub-flush below surface of interior housing face that bearings are being pressed into. A pair of rotor needle bearings for you to install in the housing. (2)[*Optional upgrade available to INA Double-seal needle bearings for $20 additional, message seller to add.]
    10. Nosedrive shaft lock-washer flange nut, Zinc-plated (1)


This item includes the$550 core exchangedeposit if you need the kit to ship right away. We can ship our DIY rotorassembly kit before we receive your core used rotor assembly. With the returnof a reusable rotor assembly core, the deposit will be refunded. See moredetails here below.


Contact our Shop Foreman forour current core inventory.


What are the most common vehicle applications this item will fit?

These Eaton M62 Gen4 / M62 Gen5 Superchargers are most often found on Mazda Miata fitted with a Jackson Racing Supercharger Kits and Custom Eaton M62 Gen4 / M62 Gen5 Supercharger Kits. There are many other applications. See a list below. If you need help identifying your supercharger, send us a picture with the Year Make and Model of the vehicle and we will use the photos to make sure you receive the kit you need for your supercharger rebuild.
Related Supercharger Kit Manufacturers:
Downing Atlanta Supercharger Kits DASC
1992 - 1996 BMW 318i / 318ti / 318iS E36 I-4
1992 - 1999 BMW 318i
1989 - 1996 BMW 318ti M42B18 I-4 1.8L
1996 - 2002 BMW Z3 M44B19 I-4 1.9L
Honda Civic Supercharger Kits
Honda Prelude Supercharger Kits
Honda CRV Supercharger Kits
Ford Focus SVT OEM 2002, 2003, 2004 2.0L I-4 Zetec CW170
Jackson Racing Supercharger Kits JR JRSC
Mazda Miata MX-5 Supercharger Kits
Sebring Supercharger Kits
Toyota Racing Development TRD for the Toyota engine 1.5L 1NZ-FE
Vehicle Applications:
1994-up Acura Integra GSR B18C1
1994-up Acura Integra Non-VTEC B18B1
1997-up Acura Integra Type R B18C5BRP supercharger kits
1988-91 Honda Civic, CRX Si Only D16A6
1992-95 Honda Civic, Del Sol 1993 - 1997 D16Z6 / D15B7
1996-98 Honda Civic EX, Del Sol Si D16Y8
1999-00 Honda Civic EX D16Y8
1996-00 Honda Civic CX, DX, LX D16Y7
1996-2001 Honda CRV B20B4 2.0L 1996-1998 / 1999-2001 B20Z2
1997-2001 Honda Prelude H22A 2.2L
1999-up Honda Civic Si B16A21990-93 Mazda Miata 1.6L
Mazda Miata 1990 1.6L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 1991 1.6L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 1992 1.6L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 1993 1.6L Eaton Jackson Racing JRSC JR supercharger
1994-up Mazda Miata 1.8L
Mazda Miata 1994 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 1995 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 1996 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 1997 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 1998 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 1999 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 2000 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 2001 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 2002 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 2003 1.8L Eaton Jackson Racing JRSC JR supercharger
Mazda Miata 2004 1.8L Eaton Jackson Racing JRSC JR superchargerMoss Motors supercharger kitsToyota Racing Development TRD for the Toyota engine 1.5L 1NZ-FE
Toyota Vios/Belta
Toyota Yaris 2006 - 2018 / Echo 2000 - 2005
Scion xA/ist
Scion xB (1st generation)/Toyota bB (1st generation)
Toyota Raum
Toyota Porte
Toyota Platz
Toyota Ist
Toyota Auris
Toyota Fun Cargo
Toyota Premio
Toyota Allion
Toyota Sienta
WiLL VS
Toyota Probox
Toyota Ractis
Toyota Corolla (Axio/Fielder, RunX, Allex) 9th Generation 2000 - 2006
Geely CK (Produced under license)
Geely MK (Produced under license)
Great Wall C10
These superchargers are in high demand. Not necessarily easy to come by. With this in mind, our Shop Foreman designed this kit to be the quickest way to put a supercharger you already own back into service, with much of the work performed by you or your mechanic, to help with cost and turnaround time savings. This kit is especially great for automotive repair shops where the mechanic can keep the cost and turnaround time down by completing the less difficult work in his repair facility.This item is a do-it-yourself complete rebuild kit with a pre-built and timed rotor assembly. It is ready to install into your supercharger housing by you or your mechanic. It comes with a parts kit to rebuild the Eaton Snout Nose Drive. Also included is a pair of rotor shaft needle bearings that are quality controlled checked and ready for installation by you or your mechanic into the supercharger housing.Or...To have a supercharger completely serviced by us, you send your core in for the rebuild. We have a Complete Rebuild Service which you can send your supercharger in to have performed. In this way you avoid a large core charge I would have to hold if I sent you a completely rebuilt and ready to install supercharger to you before a core supercharger is received by us. The Complete Rebuild Service for the Eaton M62 Gen4 / M62 Gen5 supercharger is as follows:$595 - $795 Complete Rebuild Service Eaton M62 Gen4 / M62 Gen5 - Prices may vary due to variations in supercharger housing design and internal parts

$189 Precision Thermal BarrierRotor Coating Service
$135 - $211 Estimated return shipping and packaging cost for most USA addresses(cost will be based on zip code and what parts are sent into us)
$919 - $1195 Estimated total with shipping

Our do-it-yourself Complete Rebuild kit saves you several hundred Dollars, or gives a fantastic potential profit margin for an automotive repair shop.This item is a rotor assembly that has been newly re-manufactured with the rotors newly re-coated and precision-timed. Currently, it comes with a FREE Complete Rebuild Kit (an estimated $200 retail value) that includes all the parts needed for the complete service of the supercharger.Buy this item because the rotor assembly is already professionally re-manufactured for you. Our rotor assembly bearings are retained by an Aluminum plate designed and CNC manufactured specifically for this application by Embree Specialty Machine. This is the only method of bearing retention we trust for our supercharger rebuilding services. Now, you can use this professional, reliable method to completely rebuild your Eaton supercharger yourself, saving you time and money. NO ALUMINUM WELDING REQUIRED. A U.S. Patent has been applied for to protect this bearing retention process from unauthorized use by anyone but the designer of the process or his legal beneficiaries, Patent Pending.Our rotor assembly is built to the exact same specifications we use when we rebuild a supercharger at Embree Specialty Machine. To assist you in your assembly work, the tolerances are listed in this item description. The bearings and seals used are upgraded from the original part specifications and most importantly, the rotor seals are now a Double-lip Viton.How does Embree Specialty Machine re-manufacture this Eaton Supercharger Rotor Assembly?We completely disassemble the rotor assembly plate including removing the old seals and bearings. The bearing plate is carefully measured and paired with a newly recoated pair of rotors. The ESM rotor coating is our exclusive thermal barrier, interference-fit coating, similar to Piston Skirt coating in durability and environment parameters. Our coating is durable in harsh environments found in configurations using nitrous injection systems, methanol or water injection. Then the rotor assembly plate is CNC machined to accomplish correct rotor timing and front rotor-to-bearing plate clearance, set at 0.006" to 0.009" and the mesh is split +/- 0.001" for optimum supercharger operation. Both rotor seals and rotor ball bearing have been replaced.What does this item include?This item includes the same high quality parts we use in our Embree Specialty Machine rebuild services. This kit contains an Embree Specialty Machine re-manufactured rotor assembly. This kit also contains the parts and other items needed to complete the supercharger nosedrive assembly rebuild service yourself, along with replacing the housing needle bearings. This item is Quality Control checked. As an informed DIY Do-It-Yourself person, you are purchasing this item to complete the rebuild service yourself. You are making the decision to take upon yourself the responsibility of the successful outcome. If you decide at any point to have a professional perform this service, send it in. The parts for the supercharger nosedrive assembly are correct when this item leaves the shop. Damage that occurs after the point where it is packaged for shipment from us, is completely on the mechanical person performing the rebuild service, whether you or your mechanic. No refunds will be given however, if you run into issues, contact us first because we can help.What kit do I purchase if my supercharger has a short nosedrive with a double-row ball bearing?Short nose drive superchargers use a single double-row ball bearing rather than the Back snout ball bearing & Front snout ball bearing. The photos you provide the Shop Foreman will be used to confirm whether your supercharger has a short nose drive that uses the single double-row ball bearing or the more common nose drive that uses 2 single-row nose drive ball bearings. We have the double-row ball bearing available for an upgrade charge, confirmed with order.
FREQUENTLY ASKED QUESTIONS:
If I have a non-supercharged car, can I buy this item and get a complete supercharger head unit with the engine fit kit including everything that is needed to install a supercharger on my vehicle?
No, you will need to provide for exchange, your rotor assembly or pay the core charge. This is not a complete supercharger. Instead this is a kit that contains the components to rebuild a supercharger you already own.
Who and what is this kit designed for? For the Shop Technician or DIY Do-It-Yourself person, this kit includes the Embree Specialty Machine Eaton Re-manufactured Rotor Assembly. Get the same Premium Quality bearings and seals used in our ESM Complete Rebuild Service. This item has been designed by our Shop Foreman, based on years of successfully servicing Eaton superchargers to give you the Best Chance at Success (TM) when performing the supercharger rebuild service yourself.If you decide at any point to have a professional perform this service, send it in. The rotor assembly is correct when it leaves the shop. Damage that occurs after the point where it is packaged for shipment from us, is completely on the mechanical person performing the rebuild service, whether you or your mechanic. No refunds will be given however, if you run into issues, contact us first because we can help.What can be done to confirm this is the right item for my application?Send us a message with some cellular phone photos of the supercharger to be serviced.This is an important first step. The Shop Foreman will require these pictures to identify the supercharger and to help us make sure proper components are sent. There are several variations that must be considered to make sure the drive gear is on the correct side of the rotor assembly and the correct ball bearings are provided. For a list of most compatible vehicles see the compatibility chart.We are happy to help you make sure you order the right part for the job. If you have ANY DOUBTS about this being the one your application needs, please email us before you purchase this item. Include a cellular phone photo of the one you are replacing, for the Shop Foreman to look at. Also, include the year, make, model and trim level to assist in the identification of the vehicle application.
It is not always easy to be sure what you have because there are so many variations to the Eaton superchargers. With this in mind we want you to know that if the rotor assembly that arrives does not match the one you need to replace, contact us immediately. Do not panic and remember we have offered this because we want to help you get the right parts. We want you to have the right one and will work with you to exchange it when an honest mistake is made. Please help us by making your best effort to be sure which rotor assembly you need before you place your order. It is okay to tell us in your order email that you are not sure what you need. It can really help us to help you if you would email us a photo, and for this cell phone photos work great. We can prevent delays and frustration by looking at your snapshots for 5 minutes instead of all the extra work to exchange the part. Let us help you up front if you aren't 100% sure you know what you have and what you need.Is this the right kit for a supercharger with a short nose drive?No. Some of the Eaton superchargers come with short nose drives that need a single double-row ball bearing instead of two single-row ball bearings. If you have one or suspect you have one, you should send us a photo of your short nose drive supercharger because we must know in order to provide the appropriate nose drive ball bearings. We have the appropriate parts and you will want to confirm this with your order so that we can include the correct parts in your kit.What is the difference between the Eaton M45 and M62 superchargers?This item is for an Eaton M45 which shares the same bearing plate as an M62 but the M62 rotors are longer. The M45 kits are available through our store, too. Message us with questions and we can help you determine what item is right for you.How can the Eaton supercharger model be determined?
With the Gen 1, 2 & 3 Eaton superchargers, this is a simple matter to determine because holding the nose drive on the:Eaton M45 Gen3 has 8 bolts
Eaton M62 Gen3 has 8 bolts
Eaton M90 Gen3 has 9 boltsIf the supercharger bearing plate you are working on looks way different than this, then just email us some phone pictures and ask our Shop Foreman to assist you in determining the supercharger type you have and what kit you need.THIS ITEM IS FOR:Eaton M62 Gen4 orEaton M62 Gen5
THIS ITEM IS NOT FOR:Eaton M45 Gen3 with short nose drive
Eaton M45 Gen3
Eaton M45 Gen4
Eaton M45 Gen5
Eaton M62 Gen3
Eaton M90 Gen3
Eaton M90 Gen4
Eaton M90 Gen5
Eaton M112 Gen4
Eaton M112 Gen5
Eaton M122
Eaton TVS 4-lobeThis kit is NOT for these supercharger model/generations because they use a different rotor assembly bearing plates. Please contact us to get more details about a supercharger rebuild kit for these or other Eaton Models that are not listed here. Contact us 24/7 by messages to speak with the Wade Embree, Shop Foreman of The High Speed Lab Supercharger Shop. Look for more contact information at the bottom of the [Payment & shipping] section of this item.What are the specifications for the ESM Rotor Coating?Superior, our Rotor Coating is very consistent because it is thickness checked during quality control inspection to ensure even application. Not all rotor coating available in the market is precision checked like ours. We check them so carefully after coating because the rotor assembly will work best and most quietly with proper thickness of rotor coating. You can see that the bearing plate is precision CNC machined to set the ideal tolerances, giving you optimum performance.What does this supercharger rebuild kit process include?You, the buyer will have the parts that you need to replace the rear rotor needle bearings, rebuild the nose drive snout and install the rotor assembly yourself.
Technical support from the ESM Shop Foreman is available during normal business hours by contacting us through the message center in . Our main shop phone number is available on our company website.What are some important process points that can help with the rebuild process?- The inside race of the front nose drive ball bearing must be supported when installing the shaft. This means the shaft must be installed before the front nose drive seal is installed because the front nose drive seal will cover the inner race of the front nose drive bearing when the seal is installed. If you do not support the inner race, it will result in installation damage to the ball bearing. A clicking noise in the bearing after installation is a symptom of this.- Never use ball bearings with dust covers because in this application they are used in an oil bath.
Should a contact phone number be provided by the buyer when the item is ordered or purchased?Providing a phone number is always helpful and leads to better service because we can contact you if there are any questions about your order. Of course we never have time to spam and never share information.What will the supercharger rebuild process include when using this kit?You, the buyer will have the parts that you need to replace the rear rotor needle bearings, rebuild the nose drive snout and install the rotor assembly yourself. After the rotor pack is installed, you need to check rear rotor clearance.We recommend using Permatex Anaerobic Gasket Maker (PX#51817 NET .20 FL OZ or PX#51813 NET 1.69 FL OZ) which is designed for Aluminum flanges, available at some auto parts stores. Do not get any sealer or any debris in the rotors during installation. Do not use too much sealer or it will squeeze out into the rotors which will damage the supercharger. Completely clean any old sealer off the surfaces you are connecting the supercharger to because leaving the old sealer on the flanges will distort the supercharger housing when bolted together and cause failure. Follow the instructions on the package of the sealer for best results.What is the tolerance goal for my assembly to work properly?You will want a minimum gap of 0.006" to 0.010". The gap can be greater than 0.010" however this wide of a gap will allow for air charge leakage. The smaller the gap between the rear housing and the back rotor faces, the tighter the supercharger seal. The rotors should never touch each other or the housing internal bores, anywhere at all.What Warranty Coverage is included with my purchase?Our One-Year Warranty and our long-term reputation will be your peace of mind.Core Charge Details (YOU HAVE A CHOICE!):CHOICE (A):
Purchase this item which includes a $350 core charge. The new item will go out as soon as possible and before your core is received. You can keep your core if you prefer. We hope to encourage you to return the core by including a core charge. If you would like to send it in for a refund of the core charge, return ship it back to us within 15 days of receipt of the item. The cost of return shipping is always the buyer's responsibility so ship as cheaply as possible. The box our kit is sent to you in is built tough enough that you can use it to return your used rotor assembly core. So there is no need for you to round up a box and packing material. We want this to be easy for you. After you ship it, email me a tracking number to help identify yours by alerting us to its return. The core charge will be refunded immediately following the Shop Foreman's inspection check in of the returned core, normally 5-10 business days depending upon the shop load when the core is received. Damage can affect the core refund if it makes the core parts unusable for the next customer. See choice (B) to understand your options.CHOICE (B):
To avoid the core charge, you purchase the item similar to this item without adding a $350 core charge and would then ship your core immediately. Shortly after our receipt of the core, we will ship the new item out. In this way, we can help you avoid the core charge while continuing to keep costs low for everyone. If you have any questions, before you buy this kit please contact us because we want to send you the right part the first time. A few quick emails can make all the difference in the long run. This will give us the chance to address concerns before we both have invested time and money. Also, you may have the same question as someone else which we can share by posting answers for others to learn from. Our ESM supercharger rebuild kits are designed by the Shop Foreman for your Best Chance at Success (TM).And as always, we are here if you decide it might be in your best interest to have a professional supercharger re-manufacturer service it. Yes, we can rebuild it even if you have started the service yourself. Try not to tear anything up and package all the parts up carefully.

Please contact us to get moredetails about a supercharger rebuild kit for these or other Eaton SuperchargerModels that are not listed here.

For this supercharger we offercomplete remanufacturing services. Available services include:

  • Complete Supercharger Rebuild Service (quoted below)
  • Rotor Coating Service
  • Complete Supercharger Rebuild Kit, with re-manufactured, timed, rotor assembly with new rotor coating and parts to complete rebuild service.
  • External Powder Coating Services for the supercharger and other intake component (stock and custom colors available in several surface textures including wrinkle, gloss and hammertone powder coating)
  • Rescue Repair Services (Repair a tripped threaded hole, removing internal housing bore scarring, etc)
  • Pulleys in both stock and overdrive diameters
  • Test, repair and replace bypass valve diaphragm assembly components
  • Core exchange services, whole supercharger and rotor assembly exchanges, contact us for availability.
  • And more?

To have a supercharger completelyserviced by us, you send your core in for the rebuild. We have a CompleteRebuild Service which you can send your supercharger in to have performed. Inthis way you avoid a large core charge.

Get started today on your supercharger rebuild service, knowing you have choices to fit your budget, time frame, mechanical skill level and available shop tools.We appreciate your business.
The High Speed Lab Supercharger Shop

Buy Now



Search for a different part:


Related Cars:



2001 Honda S2000
2001 Honda S2000

2008 Lexus LF-A Roadster Concept
2008 Lexus LF-A Roadster Concept

2014 Porsche 911 GT3
2014 Porsche 911 GT3

2001 Ferrari 360 Spider
2001 Ferrari 360 Spider

2000 Ultima GTR
2000 Ultima GTR

2004 Audi RSQ Concept
2004 Audi RSQ Concept

2006 Dodge Charger RT
2006 Dodge Charger RT

2010 Hennessey Venom GT
2010 Hennessey Venom GT

2006 Rolls-Royce Phantom Black
2006 Rolls-Royce Phantom Black

2011 Ariel Atom Mugen
2011 Ariel Atom Mugen

Related Items:

1320 D series JRSC Jackson Racing supercharger Tensioner bracket assembly D16 picture

1320 D series JRSC Jackson Racing supercharger Tensioner bracket assembly D16

$219.00



1320 B series JRSC Jackson Racing supercharger Upper & Lower bracket B16 gsr si picture

1320 B series JRSC Jackson Racing supercharger Upper & Lower bracket B16 gsr si

$299.99



94-97 Mazda Miata MX5 NA 1.8L Jackson Racing Cold Air Induction (Needs Repairs) picture

94-97 Mazda Miata MX5 NA 1.8L Jackson Racing Cold Air Induction (Needs Repairs)

$150.00




Contact | Copyright Information | Privacy Policy & Terms of Use