Headlights Assembly Kit For 2000-2005 Chevrolet Impala Headlamp Pair Set LH RH For Sale - New and Used

Package include;

• Pair Headlight Assembly Left +
• 2000-2005 Chevy Impala

Please carefully check whether the product matches your own car model before buying.If you have any questions, please contact us in time.

Install；

Headlights Assembly Kit For 2000-2005 Chevrolet Impala Headlamp Pair Set LH RH

Package include;

• Pair Headlight Assembly Left +
• 2000-2005 Chevy Impala

Please carefully check whether the product matches your own car model before buying.
If you have any questions, please contact us in time.

Install；

• Loosen the screws, clips, or retaining springs that hold the headlight in place.
• Disconnect the wiring from the assembly.
• Remove the headlight from the vehicle and replace it with a new one.
• Install the new headlight assembly.
• Hold the new headlight in place, making sure the screws, clips, or retaining springs used are sealed.
• Reconnect the wires removed from the components.
• Put back the grille and other components you removed. Seal them back in place.
• Test the new component.

​

​How to adjust the headlight assembly?

Check the alignment of the lights first. Park the vehicle about 10 to 25 feet away from the wall with the light pointed at the wall. The centerline of the headlights should not be 3.5 feet above the ground.

1. Locate the adjusting screw.
2. Adjust the headlights individually.The headlights should be adjusted one at a time. Put a rag or towel on the chair in front of the light you want to block. (NOTE: Directly covering the lamp assembly will damage the plastic lens.)
3. Adjust the vertical field.The screw on the top of the lampshade should be turned clockwise to raise the lamp and counterclockwise to lower the lamp. The headlamp should be adjusted until the top of the most intense part of the beam is directly on the center of the tape line on the wall or just below the center of the tape line.
4. Test your
5. DOT/SAT approved for street legal. Safety & Fashion.
6. High grade ABS plastic. For toughness, impact resistance, and heat resistance.
7. Condition: 100% Brand New and High Quality
8. Material: ABS Plastic Housing / Polycarbonate Lens
9. Professional Installation is Highly Recommended.
10. Installation Instruction is NOT Included.​

Item SpecificsBrand ZoneMotiveManufacturer Part Number 11252920Manufacturer Warranty 1 YearInterchange Part Number 10349961Lighting Technology HalogenHousing Color ChromeBulb Shape Code HB3 (9005)Bulbs Included NoMounting Hardware Included NoComponents Included Lens and HousingPlacement on Vehicle Front, Right, LeftBulb Shape Code 1 Low Beam HB4 (9006)Headlight Style ReflectorLens Color ClearFitment Type Direct ReplacementAssembly Type SealedWater Proof YesLens Material Plastic
About Us

Special Note:DO check the compatible chart before you paying the items, or contact us for checking the compatibilities for your vehicles / cars / trucks.

Payment

Any payment which can be accept by .

Shipping

2-8 working days in transit.

Product will be shipped within 2 business days after full payment is received and verified.

USPS, UPS, FedEx or DHLshipping will be provided.

Delivery time is about 2-8 business days to most of addresses.

Returns

30-Day free return provided.

Contact Us

Any quesiton or problem, do contact us please, we are always online to answer.

DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Power Steering Pressures Fuel Tank Pipes Sun Visors Secondary Air Pumps Throttle Bodies Roof Racks Fuel Pumps Window Regulators CV Axle Cold Air Intake Kits Mirrors Leveling Lift Kits Sensors Oxygen Sensors Windshield Wiper Motors A/C Compressors Wheel Hub Bearings Window Switchs Head Gasket Sets Starters Turbochargers Complete Struts Headlight Assemblies Radiators Steering U Joints Horns Power Steering Pumps Brake Rotors & Pads Car Tools Steering Shafts Transfer Case Shift Motors Cooling Fans Steering Knuckle OtherHot Item For 2004-2006 Toyota Camry 2.4L 2 Pcs Upstream & Downstream Oxygen O2 02 Sensors USD 26.96 Power Steering Pressure Hose For 2003-2007 Honda Accord 2.4L 53713SDAA01 USD 25.59 For 2012-2017 Toyota Camry Sun Visor Gray W/Sunroof Left Side 2.5L 3.5L USD 26.46 For 1985-1996 Ford F-150 Ford F-250 4.9L 5.0L 5.8L Throttle Position Sensor USD 12.58 For 2004-2010 Ford Explorer Ford F-150 2005-2009 F-250 Throttle Position Sensor USD 14.10 Delivery
New List Item MLS Head Gasket Set For 01-04 Ford E150 E250 Econoline F-150 Trucks 4.2L USD 59.29 Power Window Switch fits 2001 2002 2003-2006 BMW X5 Without Auto Dimming Mirrors USD 59.99 2 Rear Driver or Passenger Side Wheel Bearings For Pontiac Vibe Toyota Corolla USD 65.07 Drill & Slotted Front Disc Brake Rotors Fit For Mazda 3 2008 09 10 11 12 2013 USD 77.93 Transfer Case Shift Motor Actuator For 2005-2018 Land Rover USD 73.97 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us Headlights Assembly Kit For 2000-2005 Chevrolet Impala Headlamp Pair Set LH RH

Package include;

• Pair Headlight Assembly Left +
• 2000-2005 Chevy Impala

Please carefully check whether the product matches your own car model before buying.
If you have any questions, please contact us in time.

Install；

• Loosen the screws, clips, or retaining springs that hold the headlight in place.
• Disconnect the wiring from the assembly.
• Remove the headlight from the vehicle and replace it with a new one.
• Install the new headlight assembly.
• Hold the new headlight in place, making sure the screws, clips, or retaining springs used are sealed.
• Reconnect the wires removed from the components.
• Put back the grille and other components you removed. Seal them back in place.
• Test the new component.

​

​How to adjust the headlight assembly?

Check the alignment of the lights first. Park the vehicle about 10 to 25 feet away from the wall with the light pointed at the wall. The centerline of the headlights should not be 3.5 feet above the ground.

1. Locate the adjusting screw.
2. Adjust the headlights individually.The headlights should be adjusted one at a time. Put a rag or towel on the chair in front of the light you want to block. (NOTE: Directly covering the lamp assembly will damage the plastic lens.)
3. Adjust the vertical field.The screw on the top of the lampshade should be turned clockwise to raise the lamp and counterclockwise to lower the lamp. The headlamp should be adjusted until the top of the most intense part of the beam is directly on the center of the tape line on the wall or just below the center of the tape line.
4. Test your
5. DOT/SAT approved for street legal. Safety & Fashion.
6. High grade ABS plastic. For toughness, impact resistance, and heat resistance.
7. Condition: 100% Brand New and High Quality
8. Material: ABS Plastic Housing / Polycarbonate Lens
9. Professional Installation is Highly Recommended.
10. Installation Instruction is NOT Included.​
Detailed SpecificsBrand :ZoneMotiveManufacturer Part Number :11252920Manufacturer Warranty :1 YearInterchange Part Number :10349961Lighting Technology :HalogenHousing Color :ChromeBulb Shape Code :HB3 (9005)Bulbs Included :NoMounting Hardware Included :NoComponents Included :Lens and HousingPlacement on Vehicle :Front, Right, LeftBulb Shape Code 1 :Low Beam HB4 (9006)Headlight Style :ReflectorLens Color :ClearFitment Type :Direct ReplacementAssembly Type :SealedWater Proof :YesLens Material :Plastic
About Us

Special Note:DO check the compatible chart before you paying the items, or contact us for checking the compatibilities for your vehicles / cars / trucks.

Payment

Any payment which can be accept by .

Shipping

2-8 working days in transit.

Product will be shipped within 2 business days after full payment is received and verified.

USPS, UPS, FedEx or DHLshipping will be provided.

Delivery time is about 2-8 business days to most of addresses.

Returns

30-Day free return provided.

Contact Us

Any quesiton or problem, do contact us please, we are always online to answer.




All right reserved.






---