Front Brake Line Lock Kit Heavy Duty Type Roll Control Hill Holder Kit UniversalSalle-Autoparts Introduction:Salle-Autopartshas been providing the quality products in automotive parts & accessories for years. Being a professional e-Bayer that provides you guys the greater shopping experiences is out mission. Product100% Brand New Product, Quality Ensured, Provide You the Best Confident and Support! 90 Days Warranty, Money Back Guarantee, No Risk, No Hassle!ShippingFree Shipping. Handling time: 2 Business day.Item is shipped to address.Leaving correct.address can minimize delay. Tracking information. will be sent once item is shipped. ContactWe have a friendly and dedicated support teams to handle any problems you come up with our products. Please contact us first via email or message for replacement, refund or technical problem caused by any reason.
Description: Salle-Autoparts Universal Front Brake Line Lock Kit Heavy Duty Type Roll Control Hill Holder Kit๐ APPLICATION:For drag racing to lock the front tires of the car,Works with 12 -24 volt electric systems.It can handle pressure spikes up to 1000 psi.
๐ QUICK BRAKE:Keep the brake pressure on the front or rear brake to keep the vehicle on the start line on the hill or start line.
๐ EASY TO USE: This high quality solenoid valve controls both the front brake and the rear brake. Make the brakes more convenient.The line lock kit contains a heavy duty push button switch, switch bracket, coiled wire, rebuildable line-lock valve, fuse holder, and indicator light
๐ EXCELLENT AFTERMARKET REPLACEMENT: Exquisite workmanship, original standard, you can direct replacement for old or broken one.
๐ WARRANTY:PQY provides 90 Day warranty for the product.If you have any question,please send us mail,and we will respond you in 24 hours except weekend and holiday.Feature:
Stainless steel valve assembly for the ultimate in corrosion control
The electric coil is fully enclosed in epoxy for reliability
The finned housing not only looks good but helps to dissipate heat
Wide, lightweight base for better mounting stability
Easily serviced in the field
Includes an extra threaded port for brake line pressure gauge
Item Specifications:
Condition:100% Brand New
Warranty:90 DayFree return:30 Day
Type: Brake Line Lock Kit
Model: Roll Control Hill Holder Kit
Voltage: 12~24VDC
Color Available:Silver, Black
Color: Silver
Material: Stainless Steel & Aluminum
Pad Material: Stainless Steel & Aluminum
Line Lock Finish: Silver Anodized
Line Lock Material: 6063 Aluminum, Stainless Steel
Line Lock Type: Electric
Inlet Attachment: Female Threads
Outlet Attachment: Female Threads
Inlet Thread Size: 1/8-27 NPT
Outlet Thread Size:1/8-27 NPT
Line Lock Outlet Quantity: Three
Line Lock Inlet Quantity: Only One
Mounting Style: Bolt-On
Solid or Vented Rotor: Solid
Rotor Style: Dimpled+Drilled+Slotted
Suitable for: Disc+Drum
Placement on Vehicle: Front
Caliper Finish: Anodized
Size: 15.6*18.7*7.7cm box
Caution:These line lock kits are used for drag racing to lock the front tires of the car. This decreases the chance of your car rolling through the lights before it\'s time. Also locking the front wheels produces a more efficient burn-out to heat up your tires. Extensive testing has shown a 10-millisecond release time with vibration resistance up to 30-G\'s with no mechanical failure. On the street or off-road, the line lock can also be used as a temporary electronic parking brake when both the clutch and brake are needed at the same time. Kits allow you to lock your front or rear brakes at will.This launch control is a sophisticated device that installs into your existing brake system. The easily installed solenoid provides the brake holding capacity you are looking for. It can be used for racing or for street applications if you need a hill holder while stopped on an uphill grade. This high quality solenoid can be used on the front brakes of your vehicle. It can handle pressure spikes up to to 3000 PSI line pressure. Include light and switch.Control to make the front and rear brakes synchronized. Hold the brake pressure to the front or rear brakes to hold the vehicle on a hill or the starting line at the drags. Easy to do a burn out by locking the front tires and releasing the back brakes with this system. Works with 12 - 24VDC electric systems.Installation Notes:
1. The port marked with \"M\" is the air inlet port. Connect the line from the master cylinder (in most cases through the proportional valve) to this port. Confirm with the drawing in this manual. Use Teflon tape on the npt fitting that goes into the solenoid.
2. Using any of the remaining three npt ports to the rear (or front, depending on your application) brake, plug the remaining two open ports with 1/8\" npt plugs. Use Teflon tape on the 1/8\" npt connector.
3. Connect the black wire from the line lock to a clean chassis ground, or directly to the negative terminal of the battery if desired.
4. Make all connections using the proper size lines, fittings, connectors, etc.
5. If one line needs to be removed from the proportioning valve (in some applications only), use the appropriate SAE inverted flare plug to seal the port. (If one line needs to be removed from the proportioning valve (some applications), use the appropriate SAE inverted flare plug to seal the port.
Fitment:
Universal
Packing List:1x Line Lock Kit (As shown in the picture)NOTE:(1) Items would be shipped within 24 hours with cleared payment(Exclude Weekend and Holidays)
(2) Items wont be shipped to Puerto Rico(Please check your address before placing an order!)
(3) Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item
(4)It would be highly appreciated if you might contact us first once you have any problems concerning the items. And you can expect all the issues would be resolved ASAP! PaymentDelivery detailsTerms of salesAbout usContact usPayment1.Payment must be received within 11 days after winning the item๏ผUPI (Unpaid Item Case) will be filed automatically if buyers fail to make the payment in 11 days after item ends.2.If you have difficulty paying for the item, please email us to cancel the order. Delivery details1.Items will be sent out in 48 hours on payment received from Monday to Friday. Orders during weekends and holidays will be posted in the following working day.2.Please make sure your shipping address and the order information is correct before placing an order. We will not be responsible for item loss due to wrong or unknown address.3.Let us know immediately if there are any special requirements.Terms of sales
1.We accept 30 days return/refund guarantee.2.If the item you received is faulty, damaged or incorrect, or any further problems, you can return it for replacement or refund, please contact our customer service on within 30 days from item received.
3.For damaged items on arrival, please contact us first, sending us an email with a photo is preferred. We will offer solutions to such cases. Full refund or replacement will be guaranteed.
About us
Welcome to speed-autoparts-usa
We are specialized in auto accessories for more than 8 years and we have been exporting all kinds of items concerning the auto-parts that come with high quality & best price & excellent after-sales service!
Thank you for shppping at our store.
Contact us1.Please contact us first if you have any questions such as product damaged, item not arrived, wrong item sent and item does not work. All those issues would be solved immediately with your satisfactory!2. Please contact us first before you left us a negative/neutral response and we are pleased to solve the problems you met.3.Please feel free to contact us if you have any problems and we would always be here for your need . Mounting StyleBolt-OnPad MaterialStainless Steel & AluminumOutlet Thread Size1/8-27 NPTLine Lock Outlet QuantityThreeSize15.6*18.7*7.7cm boxCaliper ColorSilverColorSilverManufacturer Part NumberDoes not applyMounting Hardware IncludedYesMaterialStainless Steel & AluminumRotor StyleDimpled,Drilled,SlottedLine Lock Inlet QuantityOnly OnePlacement on VehicleFrontSuitable Line Lock KitInlet Thread Size1/8-27 NPTVoltage12~24VDCModelRoll Control Hill Holder KitCaliper FinishAnodizedSolid or Vented RotorSolidUniversal FitmentDirect ReplacementCountry/Region of ManufactureChinaFinishNewManufacturer Warranty90 Day
