EACH ORDER WILL COME WITH TWO DECALS. ALL DECALS ARE MADE TO ORDER AND IS BRAND NEW. ALL ORDERS PLACED WITHIN BUSINESS DAYS WILL RECEIVE TRACKING NUMBER WITHIN 24 HOURS!
EACH ORDER COMES WITH 3 DECALS.THE SIZE YOU CHOOSE IS THE SIZE FOR EACH DECAL.
CUSTOM SIZE IS AVAILABLE UPON REQUEST!
Description:Decals stick to almost all flat surfaces! just peel and stick!Decorate your: laptops, Walls, Car, Windows, Bumpers, guitars, iPad, iPhone, refrigerator just about any flat smooth clean surface!About Vinyl Decals:These are DIE-CUT decals meaning there is no background. If there is a background color in the picture, it is used only as a example.The background color will be the color of the surface you place the sticker on, or clear if you put it on a window.
Vinyl Decals come in 1 piece or separate pieces for easier custom placement during install:1. Top layer is a transparent transfer tape.(Holds your decal or sticker together until it is applied)
2. Middle layer is your actual decal or sticker(It is sandwiched between the Application Tape and the Wax Backing)
3. Bottom layer is the paper backing.(protects the adhesive until the decal is ready to be applied)
Application Tips:1. Do not apply on extreme cold or hot Surfaces. Ideal temperature must be between 60°F & 90°F (room temperature).2. Do not touch the adhesive backing, oils from your skin will prevent sticking.3. Before applying decal make sure there is no wax, oily products or dust on the surface. Walls that are chalky will not stick as well.
Application Instructions:1. Rub the sticker to be sure the transfer tape is properly adhered to the sticker.2. Clean and dry the desired area. Stickers will stick best to clean smooth surfaces.3. Remove the paper backing slowly making sure the sticker stays adhered to the transparent transfer tape.4. Carefully position the sticker to the desired area.5. Rub the sticker from one side to the other, eliminating any air bubbles. Use an object like a credit card to make sure the entire sticker is fully adhered to the surface.6. Slowly remove the transfer tape, making sure no part of the sticker remains on the transfer tape.7. You may use blow dryer to soften the adhesive some more and rub the sticker so it will adhere better onto semi glossy/glossy walls.8. Check for air bubbles. In most cases air bubbles can be worked to the edge of the sticker, but if not, a pin hole will allow the air out and become virtually invisible.
