APPLICATIONForJeep Wrangler Brand NewMaterial:Heavy Duty SteelFinish:Black Powder Service Built-in LEDlightholes, you can install lights of different colors and wattages according to your needs.2. 2 Stage Black Powder Coating, corrosion and durability.3. 4.75-ton high-strength D-rings and D-ring aprons look great.4. Made from heavy duty 5/32" thick low carbon hard steelfor harder, stronger bumpers.5.Remarks: For Jeep Wrangler JK 2007-2018 textured Front Bumper protector guard steel
APPLICATION
ForJeep Wrangler Brand New
Material:Heavy Duty Steel
Finish:Black Powder Service Built-in LEDlightholes, you can install lights of different colors and wattages according to your needs.
2. 2 Stage Black Powder Coating, corrosion and durability.
3. 4.75-ton high-strength D-rings and D-ring aprons look great.
4. Made from heavy duty 5/32" thick low carbon hard steelfor harder, stronger bumpers.
5.Remarks:
Does not include wiring harness
Sensor hole does not support original
PACKAGE INCLUDED
1x Front Bumper withLED lights
2x D-rings
Mounting Hardware Included
QUESTIONAND ANSWER
1.What tools and experience do I need to install my bumper?
Answer:The basic installation tools are included with the product itself. You only need to follow the installation instructions or find the relevant installation videos on other video platforms, and you can easily install them without other installation experience.
2.How are the lights hook up? What harness you talking about ?
Answer:The lights can be connected to the LED lights by buying a wire harness, or connected to the devices in the car. Reminder: This product does not contain wiring harness, you need to buy it separately.
3.Do these bumpers have the holes for sonar sensors?
Answer:The rear bumper has a sensor hole, the front bumper does not have a sensor hole.
4.I am not planning on mounting a winch. Do you have a cover plate that a license plate can be mounted to?
Answer:License plate holder needs to be purchased by yourself.
5.What parking sensors will work with these bumpers? what did you mean by remark 3(Sensor hole does not support original)?
Answer:The product has sensor hole, but it does not support the original. It is a standard model, 19mm.
6.You state OEM sensors will not work, what sensors need to be purchased for these bumpers?
Answer:Hay sensores modificados.
For Jeep Wrangler JK 2007-2018 textured Front Bumper protector guard steel
APPLICATION
ForJeep Wrangler Brand New
Material:Heavy Duty Steel
Finish:Black Powder Service Built-in LEDlightholes, you can install lights of different colors and wattages according to your needs.
2. 2 Stage Black Powder Coating, corrosion and durability.
3. 4.75-ton high-strength D-rings and D-ring aprons look great.
4. Made from heavy duty 5/32" thick low carbon hard steelfor harder, stronger bumpers.
5.Remarks:
Does not include wiring harness
Sensor hole does not support original
PACKAGE INCLUDED
1x Front Bumper withLED lights
2x D-rings
Mounting Hardware Included
QUESTIONAND ANSWER
1.What tools and experience do I need to install my bumper?
Answer:The basic installation tools are included with the product itself. You only need to follow the installation instructions or find the relevant installation videos on other video platforms, and you can easily install them without other installation experience.
2.How are the lights hook up? What harness you talking about ?
Answer:The lights can be connected to the LED lights by buying a wire harness, or connected to the devices in the car. Reminder: This product does not contain wiring harness, you need to buy it separately.
3.Do these bumpers have the holes for sonar sensors?
Answer:The rear bumper has a sensor hole, the front bumper does not have a sensor hole.
4.I am not planning on mounting a winch. Do you have a cover plate that a license plate can be mounted to?
Answer:License plate holder needs to be purchased by yourself.
5.What parking sensors will work with these bumpers? what did you mean by remark 3(Sensor hole does not support original)?
Answer:The product has sensor hole, but it does not support the original. It is a standard model, 19mm.
6.You state OEM sensors will not work, what sensors need to be purchased for these bumpers?
Answer:Hay sensores modificados.
Item SpecificsInterchange Part Number :Car Truck Off road Bumper Guard,Hook,fog light Holes,Wrangler JKManufacturer Part Number :TA160116-top01PBrand :TopcnautopPlacement on Vehicle :FrontWarranty :5 YearFitment Type :Direct ReplacementMaterial :Heavy Duty SteelColor :BlackSurface Finish :Powder CoatedWeight :About 61 lbs.Year :2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018Type :Bumper AssemblyModified Item :NoCustom Bundle :NoFeatures :Mounting Hardware Included,Scratch-resistantBundle Description :front bumper,4.75T D-rings,winch plate,mounting hardwares.Applicable Regions :USInstallation :Direct Bolt-On, No Drilling Required
Shipping
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to offerding/buying.
Payment
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
Returns
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before offerding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
Customer Services
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my "-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
response
1. We will leave positive response once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral response. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive response to all our customers.
3. If you are satisfied with the product you received, please leave us positive response and 5 scores DSR.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Ignition Coils complete struts Radiator Support Wheel Hub Bearing Wheel Adaptor Oxygen Sensor Towing mirrors Fuel pump assembly Lift supports Starter Key or key case struts floor mats wheel lug nuts Cylinder Piston Gasket Kit Cylinder Head Gasket Sets CV Axle Door handle Radiator fastener UTV & ATV Brake System Parts▷Brake Pads♢Sintered Brake Pads♢Kevlar Carbon Brake Pads◈Brake Shoes Regulator Rectifier blower motor fan blower motor resistor suspension kit◈suspension kits◈suspension cj◈suspension gxy◈suspension fu AC Compressor Brake system◈Brake Rotors◈Brake Pads◈Brake Rotors and Pads◈Brake Pad Sensor◈Brake Drum◈Brake Shoes◈Brake Calipers◈Brake Calipers & pads◈Brake Calipers & Rotors & pads Car Seat Cover Air Suspensions Nerf Bars & Running Boards Window Switch Mass Air Flow Sensor-MAF Window Regulator Side Fender marker Alternator Leveling Lift Kit Car Cover Fuel Injector Coilover Car Tools License Plate Frame Windshield Wiper Motor Thermostat Housing Radiator Coolant Tank Fuel Tank Pipe Valve Cover Door Lock Actuator Power Steering Pump Variable Timing Solenoid (VVT) Electric Water Pump Timing Chain Kits Timing Belt Kits Water Pumps Oil Pump Strut Tie Bar Tire Pressure Sensor Throttle Body Harmonic Balancer Oil Pan Motorcycle Carburetor & Parts Urea Pump Cooling Fan Cooling Fan Clutch Oil Cooler Hydraulic Lifter&Roller Lifter Suspension+Strut+Bearing HVAC ATV Rear Wheel Axle Parking sensor Car Antenna ABS Wheel Speed Sensor PTO Clutch Spoilers & Wings Tensioners Purge Valve Knock Sensor Turbocharger Crankshaft Position Sensor Camshaft Position Sensor MAP Sensor Oil Pressure Sensor Throttle Position Sensor Stator idle air control valve Transfer Case Shift Motor Secondary Air Injection Pump Running Board Motor Consoles & Parts Roof rack Bumper Tire Pressure Gauge Steering Rack Air Diesel Heater Engine Mount Glow Plug Air Cleaner Filter Box Cylinder Piston Kit Pressure Tester Gauge Jack Stands Wheel Lug Sun Visor Window Visor trim tilt motor ATV Brake Caliper Oil Catch Can Tank Crankcase Vent Valve Horns Steering U-Joint Fuel Shut Off Solenoid Fuel Cell Tank Height Level Sensor Temperature Sensor Driveshaft Air Ride Suspension Valves Calipers & Rotors◈Calipers & Rotors Pads Radiator Hose Ballast module Rubber Seal Strip Dipstick Removal Open Tools Camshaft & Crankshaft ATV Brake Master Cylinder Rocker Arm Battery Switch Oil Fuel Hose Line brake Hose Line LED headlight Assembly Wheel Hub Bearing Knuckle headlight motorcycle Foot Rest Pedal O Ring water Pump Impeller Strut Mount Splash Guards & Mud Flaps Heater Cores Evaporators vehicle speed sensor RV Water Pump Fuel Pressure Regulator Light Bar Mount Bracket Sensor-8 CV axle+Brake Pads/Rotors universal spacer Steering Shaft transmission filter Steering Wheel Steering Wheel Hub Steering Gear Box snorkel air intake CDI BOX Proportioning Valve Spindle Window Glass Hinge Other Golf Cart Parts Intercoolers Crankshaft Pulley Steering Knuckle 4 pcs wheel hub bearing Fender Flares jumper cable Tonneau Cover Bug Shield Front Bumper Lip dash cover primary drive clutch golf AC Compressor Control Valve+A carburetor intake mainfold Fuel Valve& Petcocks Garden Water Pump air vent Ignition Wires Lower Kits & Parts Cargo Cover Leaf Springs Shift Knobs & Boots Hub Caps ATV Ignition Switch fog lights winch Jeep Wrangler Headlights Pivot Brake Clutch Lever Power Brake Booster leveling kit + struts shocks Wheel Rim Lights◈Side/Cab Marker Lights◈Instrument Panel Lights◈Third Brake Lights◈Interior Lights◈Exterior Lights◈Led Headlights◈Special Model Lights Handlebar Riser flywheel Air Dryer steering knuckle-7 Bed Step OtherHot Item Throttle Body for Dodge Avenger Journey Caliber Jeep Patriot Compass 2.4L 2.0L USD 46.99 2 For Dodge Challenger 2008-2014 Keyless Entry Remote Control Car Key Fob USD 18.35 2x Front Hood Gas Lift Supports Struts Shocks Springs For Dodge Ram 02-10 4364 USD 16.81 Upstream & Downstream Oxygen O2 02 Sensor For 2001-2005 Honda Civic 1.7L D17A7 USD 22.81 2x Front Hood Lift Supports Shocks Struts For Dodge Ram 1500 2500 3500 4500 5500 USD 16.57 New List Item Truck Hood Mirrors Kits For Freightliner Cascadia 2008-16 LH Side Black USD 200.99 234-2010 for 94-99 Toyota Celica 2.2L Downstream 02 Oxygen Sensor O2 Brand New USD 17.45 For 07 08 09 Suzuki SX4 2.0 Upstream Air Fuel Ratio Sensor 02 O2 Fits 234-9033 USD 32.99 For 1996 1997 1998-2000 Honda Civic Del Sol Engine Oil Dipstick 15650-P2F-A00 USD 9.99 Headlights Assembly Fits Toyota Corolla 2003-2008 CE LE S Sedan 4-Door Lamps USD 71.99 For Jeep Wrangler JK 2007-2018 textured Front Bumper protector guard steel
APPLICATION
ForJeep Wrangler Brand New
Material:Heavy Duty Steel
Finish:Black Powder Service Built-in LEDlightholes, you can install lights of different colors and wattages according to your needs.
2. 2 Stage Black Powder Coating, corrosion and durability.
3. 4.75-ton high-strength D-rings and D-ring aprons look great.
4. Made from heavy duty 5/32" thick low carbon hard steelfor harder, stronger bumpers.
5.Remarks:
Does not include wiring harness
Sensor hole does not support original
PACKAGE INCLUDED
1x Front Bumper withLED lights
2x D-rings
Mounting Hardware Included
QUESTIONAND ANSWER
1.What tools and experience do I need to install my bumper?
Answer:The basic installation tools are included with the product itself. You only need to follow the installation instructions or find the relevant installation videos on other video platforms, and you can easily install them without other installation experience.
2.How are the lights hook up? What harness you talking about ?
Answer:The lights can be connected to the LED lights by buying a wire harness, or connected to the devices in the car. Reminder: This product does not contain wiring harness, you need to buy it separately.
3.Do these bumpers have the holes for sonar sensors?
Answer:The rear bumper has a sensor hole, the front bumper does not have a sensor hole.
4.I am not planning on mounting a winch. Do you have a cover plate that a license plate can be mounted to?
Answer:License plate holder needs to be purchased by yourself.
5.What parking sensors will work with these bumpers? what did you mean by remark 3(Sensor hole does not support original)?
Answer:The product has sensor hole, but it does not support the original. It is a standard model, 19mm.
6.You state OEM sensors will not work, what sensors need to be purchased for these bumpers?
Answer:Hay sensores modificados.
Item SpecificsInterchange Part Number :Car Truck Off road Bumper Guard,Hook,fog light Holes,Wrangler JKManufacturer Part Number :TA160116-top01PBrand :TopcnautopPlacement on Vehicle :FrontWarranty :5 YearFitment Type :Direct ReplacementMaterial :Heavy Duty SteelColor :BlackSurface Finish :Powder CoatedWeight :About 61 lbs.Year :2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018Type :Bumper AssemblyModified Item :NoCustom Bundle :NoFeatures :Mounting Hardware Included,Scratch-resistantBundle Description :front bumper,4.75T D-rings,winch plate,mounting hardwares.Applicable Regions :USInstallation :Direct Bolt-On, No Drilling Required
ShippingPaymentReturnsCustomer Servicesresponse
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
1. Package handling takes about 2 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2.All domestic orders will be shipped via USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 2-5 business days.
3.Local pick up is not available.
4.Orders to the rest of world may be shipped out from our warehouse in HongKong.
5.International Buyers C Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.
b. Please check with your country customs office to determine what these additional costs will be prior to offerding/buying.
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
1.All of our brand new items come with a 60-Days money-back guarantee.
2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before offerding.
3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
5.Shipping& handling cost are not refundable.
6.Man-made damage by abuse or wrong operation is not covered by this warranty.
7.No product liability insurance is assumed.
8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my "-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item.
1. We will leave positive response once we get your payment.
2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral response. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive response to all our customers.
3. If you are satisfied with the product you received, please leave us positive response and 5 scores DSR.
Copyright of Topcn-autoparts. All rights reserved.
