For Jeep Grand Cherokee 2011-2018 LED White Kit Headlight Hi Lo Beam Bulbs 6000K For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

For Jeep Grand Cherokee 2011-2018 LED White Kit Headlight Hi Lo Beam Bulbs 6000K:
$34.99

LED headlight advantages:

Bulb Size: 9005/HB3 High Beam + H11/H8 Low Beam
Voltage: DC9~32V
Power: 60W
Light flux: 6000LM
Chip Type: Efficient COB
Material: Aluminum 6063
Color temperature: 6000K
Protection level: IP68
Stable work: -40~+140°C
Usage: car headlights (high / low beam)
LED lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more than 30%.
Fast cooling , using the most advanced, heat-dissipating structural design.
The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
Low heating temperature, The working temperature of helium can reach 800°-1000°
LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.

Install Caution:

As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Be sure to turn off the ignition and remove the key.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

Package Includes: