Front Bumper Cover & Front Grille Fog Lights AssemblyFor 2012 2013 2014 Ford Focus In order to allow you to receive the goods faster, we adopt partial shipments.If you receive one first, please wait patiently and the other will arrive soon.**If you have any questions, please feel free to contact us**Package includes : 1 Set Complete Front Bumper Grill Cover (As picture shows)Fitment : For 2012 2013 2014 Ford Focus**Front Grille LowerMaterial: Backyard-ly
For 2012-2014 Ford Focus Front Bumper Cover & Front Grille Set Plastic Black NEW
Front Bumper Cover & Front Grille Fog Lights Assembly
For 2012 2013 2014 Ford Focus
In order to allow you to receive the goods faster, we adopt partial shipments.
If you receive one first, please wait patiently and the other will arrive soon.
**If you have any questions, please feel free to contact us**
Package includes :
1 Set Complete Front Bumper Grill Cover (As picture shows)
Fitment :
For 2012 2013 2014 Ford Focus
**Front Grille Grill**
Color:Black
Position:Front Lower
Material:
ABS Plastic /Polycarbonate Lens.Made from high grade OE comparable materials to withstand rough road wear and the test of time.
Installation:
Direct bolt-on replacement. No modification required. Product does not come with installation instructions, please refer to a shop/factory manual for installation.
**Front Bumper Cover**
Reminder:
1:Take extra care when using a blade or knife to open the packaging to avoid accidentally damaging the surface of your bumper cover.
2: If you see any minor scuffs, don’t worry—your bumper cover comes pre-primed for protection and should be scuffed completely before applying your chosen primer and paint.
Note:
Folding our bumper covers to help you enjoy savings on shipping costs. When you recieve the bumper covers, you need unfold your bumper cover.Here’s a step by step guide on how to unpack, unfold:
Outdoor Method:
1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
2. Open the packaging and remove the bumper cover.
3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
4. Let the bumper cover sit in the sunlight for three hours.
5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.
Indoor Method:
1.Use the cardboard packaging as your work surface and place the bumper cover on top.
2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.
Item SpecificsManufacturer Warranty 1 YearBrand muniraterPlacement on Vehicle Front , Lower , UpperColor BlackMaterial ABS PlasticBumper Surface Finish PrimeredType Bumper & Grille KitBumper Cover Tow Hook Holes WITH Tow Hook HolesFitment Type Direct ReplacementBumper Cover Parking aid sensor holes WITHOUT PARK ASSIST SENSOR HOLESBumper Cover Fog Lamps Hole WITH Tow Fog Lamps HoleFinish PrimedFeatures Easy Installation
Payment Notice: The Guaranteed Date is automatically generated and displayed by . We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.Usually your Items will be shipped within 1-3 business day after your payment is cleared.International orders may take 10 to 30 business days to arrive.We have CA, NJ warehouses and ship items may vary according to the stock.Returns 30 Days easy returns satisfaction grantee.Items to be returned must be in original factory condition.Contact Us Before leaving us neutral or negative response, please contact us first.We will do everything we can to give you a satisfying solution.Please don't open case via or PayPal.We do our best to resolve any issue. Leaving negative response and low ratings doesn't get things solved.So please talk with us and we will not let you down.response
We strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.
Backyard-ly
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US For 2012-2014 Ford Focus Front Bumper Cover & Front Grille Set Plastic Black NEW
Front Bumper Cover & Front Grille Fog Lights Assembly
For 2012 2013 2014 Ford Focus
In order to allow you to receive the goods faster, we adopt partial shipments.
If you receive one first, please wait patiently and the other will arrive soon.
**If you have any questions, please feel free to contact us**
Package includes :
1 Set Complete Front Bumper Grill Cover (As picture shows)
Fitment :
For 2012 2013 2014 Ford Focus
**Front Grille Grill**
Color:Black
Position:Front Lower
Material:
ABS Plastic /Polycarbonate Lens.Made from high grade OE comparable materials to withstand rough road wear and the test of time.
Installation:
Direct bolt-on replacement. No modification required. Product does not come with installation instructions, please refer to a shop/factory manual for installation.
**Front Bumper Cover**
Reminder:
1:Take extra care when using a blade or knife to open the packaging to avoid accidentally damaging the surface of your bumper cover.
2: If you see any minor scuffs, don’t worry—your bumper cover comes pre-primed for protection and should be scuffed completely before applying your chosen primer and paint.
Note:
Folding our bumper covers to help you enjoy savings on shipping costs. When you recieve the bumper covers, you need unfold your bumper cover.Here’s a step by step guide on how to unpack, unfold:
Outdoor Method:
1. Find a spot that gets a lot of direct sunlight (it will need to be in the sun for up to 4 hours).
2. Open the packaging and remove the bumper cover.
3. Arrange the cardboard packaging to lie flat on the ground. This will serve as a clean surface for your bumper cover.
4. Let the bumper cover sit in the sunlight for three hours.
5. Once you hit the three-hour mark, reposition the bumper cover so that the front part is facing the floor. Leave it in this position for the remaining hour.
Indoor Method:
1.Use the cardboard packaging as your work surface and place the bumper cover on top.
2.Look for creased areas on the bumper cover. Apply heat to those areas with the heat gun.
3.Avoid pointing the heat gun at one spot for too long, as excessive heat can distort or melt the plastic. Keep the gun moving to spread the heat evenly across the surface of the bumper cover.
4.Once the last patch of creased plastic is straightened out, you can consider the bumper cover fully unfolded.
Payment
Wesupportmultiplepaymentmethods.
Shipping Notice: The Guaranteed Date is automatically generated and displayed by . We can't change it and can't control the speed of delivery, it's depend on the carrier. We will ship your item out asap after the payment is clear.Usually your Items will be shipped within 1-3 business day after your payment is cleared.International orders may take 10 to 30 business days to arrive.We have CA, NJ warehouses and ship items may vary according to the stock. Returns 30 Days easy returns satisfaction grantee.Items to be returned must be in original factory condition. Contact Us Before leaving us neutral or negative response, please contact us first.We will do everything we can to give you a satisfying solution.Please don't open case via or PayPal.We do our best to resolve any issue. Leaving negative response and low ratings doesn't get things solved.So please talk with us and we will not let you down. response
We strive for 100% customer satisfaction! response IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative response, so that we can satisfactorily address your concerns.
All right reserved.