For Corvette C8 2020-2024 Side Intake Mesh Grille Insert Guard CNC Aluminum BP For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

For Corvette C8 2020-2024 Side Intake Mesh Grille Insert Guard CNC Aluminum BP:
$39.99

You may also like

For Corvette C8 Z51 2020-24 Front Grill Radiator Guard + Side Intake Mesh Grille
124.98 USD
249.96 USD
Free shipping
50%
off
Front Grill Covers Radiator Guards For Corvette C8 Z51 Stingray 2020-2023 2024
79.99 USD
266.63 USD
Free shipping
70%
off
NEW For Corvette C8 2020-2024 Side Intake Mesh Grille Insert Guard Aluminum L+R
39.99 USD
57.13 USD
Free shipping
30%
off
Red Aluminum Jacking Lift Pad Jack Puck For Corvette C5 C6 C7 C8 GS Z06 ZR1 4X
35.99 USD
Free shipping
4x Aluminum Jacking Lift Pad Pucks for Chevy for Corvette C5 C6 C7 C8 CNC Black
40.99 USD
Free shipping
For Corvette C8 Z51 Front Grill Radiator Guard+Side Intake Mesh Grille 2020-2024
124.98 USD
Free shipping
For Corvette C8 Z51 Mid-Engine Front or Rear Tow Hook 15234068 2020-2023 22 BP
27.99 USD
Free shipping
For Corvette C8 Z51 2020-24 Front Mesh Grill Cover+Side Intake Mesh Grille RED B
124.99 USD
178.56 USD
Free shipping
30%
off
For Corvette C8 2020-2023 Side Intake Mesh Grille Insert Guard CNC RED Aluminm
65.99 USD
233.3 USD
Free shipping
72%
off
2020-2024 For Corvette C8 Stingray Front Red Mesh Grill Covers Radiator Guards
75.99 USD
399.95 USD
Free shipping
81%
off
For Corvette C8 Stingray Z06 2020-2024 Black Rear License Plate Frame Aluminum B
139.99 USD
199.99 USD
Free shipping
30%
off
For Corvette C8 2020-2023 2024 Stingray Z51 HTC Rear License Number Plate Frame
139.99 USD
279.98 USD
Free shipping
50%
off
REAL CARBON FIBER REAR STRUT TOWER COVER W/Mag Ride For Corvette C8 Z51 2020-23
189.99 USD
Free shipping
Carbon For Corvette C8 Front Strut Shock Tower Covers w/ Mag Ride 2020-UP
25.99 USD
Free shipping
14-19 For Corvette C7 Z06 Stage 3 Carbon Fiber Look Front Lip Splitter+Winglets
239.99 USD
Free shipping
For Corvette C7 Z06 Z51 Stingray Stage3 14-19 Front Lip Splitter + Side Winglets
229.99 USD
459.98 USD
Free shipping
50%
off
Gloss Black Side Skirts Extension For Corvette C8 2020-2024 For GM Z51 Style US
229.0 USD
Free shipping
Extended Front Rear Splash Rock Guard Mud Flaps For Corvette C8 CARBON 2020-2024
34.95 USD
87.38 USD
Free shipping
60%
off
For CORVETTE C8 2020 2021 2022 2023 ENGINE Components Cover Part Red Aluminum 2X
57.99 USD
Free shipping
Pair Engine Bay Panel Covers FOR CORVETTE C8 2020-2023 2024 APPEARANCE PACKAGE
58.99 USD
84.27 USD
Free shipping
30%
off
4X Wing Spoiler Center Bolts+Wrench 23155297 for Chevy for Corvette C7 Z06 2014+
14.95 USD
Free shipping
Carbon Fiber Look Engine Bay Shock Tower Cover Protect For Corvette C8 2020-2024
50.99 USD
Free shipping
For CORVETTE C8 2020 2021 2022 2023 2024 Aluminium Engine Bay Panel Cover Silver
35.99 USD
Free shipping
For Corvette C8 Z51 2020-24 Front Grill Radiator Guard + Side Intake Mesh Grille
124.98 USD
249.96 USD
Free shipping
50%
off

SAFE & SECURE SHOPPING 100% SATISFACTION GUARANTEED FAST SHIPPING For Corvette C8 2020-2024 Side Intake Mesh Grille Insert Guard CNC Aluminum BP

Product Description

If there are any problems after you purchased, please feel free to message us firstly, we will definitely give you a satisfying solution.
Please don't leave neutral or negative response or open a return request without any NOTE: These are engineered and designed to not cover the entire opening. The entire opening does not need protection. These are designed to protect radiators, and not hinder intake path. Testing showed there is no good way to secure a guard that extends all the way up into the top as it deflects under track conditions. These will protect the radiator from rocks and keep most debris like leaf's out.

Product：Side Intake Mesh Grille Insert

Fitment：For Corvette C8 2020-Up （Does Not fit for Z06 laser cut from aluminum and then powder coated in a black finish to blend in front of your inlets. We're the only ones out there who took the time to create this bolt in solution with a custom machined punch pattern to match the OEM An OEM like side inlet guards solution! Protect your radiator and intake inlets from unwanted road debris and rocks! Includes drivers & passengers side.

2. Easy install with a bolt in OEM point to create a sturdy and OEM like grill guard that should have been there from the factory. These have been track and road tested to withstand whatever you throw at them, or what gets thrown at you.

OEM style design and look：

Uses OEM bolt in location - No cheesy zip ties.

CNC laser cut Aluminum (Not plastic, so it won't crack.)

Track tested and approved. Handles 180+ MPH. Does not impede airflow.

Durable powder coat finish.

Lifetime Warranty：

PLEASE NOTE: These are engineered and designed to not cover the entire opening. The entire opening does not need protection. These are designed to protect radiators, and not hinder intake path. Testing showed there is no good way to secure a guard that extends all the way up into the top as it deflects under track conditions. These will protect the radiator from rocks and keep most debris like leaf's out.

Package： 1 PairSide Intake Mesh Grille Insert（with steps:

1.First you want to squeeze the clips in front of the hole and behind the hole for a tight fit then attach them to the main bracket and L bracket push in from the fat end on the brackets towards the smaller end.

2.Use a T-15 bit ratchet and extension to remove the T-15 screw from inside the lower portion of the vent.

3.Insert the T-15 screw into the back end of the main bracket, Clean off the inside of the vents with rubbing alcohol and a rag, Then install the main bracket back where the T-15 screw goes.

4.Add the tape to the L bracket and cut off the excess tape that hangs off the L bracket. Install the L bracket right in the area before the inner part of the vent curves upward hold firmly for 30 to 40 seconds.

5.Add the tape to the tabs on the grill, upper tab gets tape on the inside and lower tab gets tape on the outside and Please slightly bend the lower tab outward a little bit to ensure it attaches properly to the side wall when ready.

6.Install the grill with upper tab behind the inner panel try not to stick on till you adjust the grill properly and make sure the grill is in front of the brackets.

7.Set the two screws through the grill and into the brackets do not tighten all the way yet just kind of snug then apply pressure on top tab for 30 to 40 seconds. Then apply pressure to the lower slightly bent tab for 30 to 40 seconds then finally tighten your screws onto the grills and brackets with either a 3mm hex key or you can also use the T-15 ratchet bit to tighten

PAYMENT
SHIPPING
WARRANTY
ABOUT US
CONTACT

PAYMENT

1. Instant PayPal paymentis the preferred method of payment.

2. We also accept payment viaPayPal, DebitCard, Visa, MasterCard, Discover.

3. will only ship to the confirmed PayPal shipping address given with the payment.

4. If you want to ship to other address, please change your PayPal shipping address before you make payment.

5. To avoid initiating an unpaid item claim, please pay within 7 days.

SHIPPING

For US/UK Stock:

1)Orders from US UK Warehouse will be shiped by UPS/Royal Mail.All items will ship within 1-2 business day after the we receiving clear payment.

2) International order will be sent from China

Why Choose the US/UK Stock?

1. Us/Uk Local Shipping

2. Fast Delivery: 2-8 Working days Delivery.

3. Best After-Sales Buyers:

Please Note:The buyer is responsible for any applicable import duties and local taxes.

Please verify your customs duties before purchase.
Economy shipping time: about 15-28 working days
Standard shipping time: about 8-12 working days.

WARRANTY

1. We offer 30 days money back guaranteeor resend on our products, so buy with confidence.
2. Please note physical damaged or damage as a result of misuse or improper installation on the buyer/user's part is not covered by warranty.
3. Items must be returned back to us in original condition with all packaging included.
4. For all return products, buyers MUST contact us for the return address with 7 days.
5. In all cases, buyer pays shipping fees to return products for exchange or refund. Please attach your ID for identification.
6. We appreciate your business, and are striving to serve you better every day, strive for 100% customer satisfaction!
7. response is very very important to us. So Please do not leave negative response to me, if you are not satisfied with the items, please feel free to contact us. We will response in 24 hours to resolve the problems.

ABOUT US

1.We appreciate your business and strived to improve our customer service and our commitment to quality.

2.We will leave a positive response immediately after payment is received. We appreciate a positive response as much as you do.

3.If for some reason there is any issue with the purchase, please contact us prior to leaving response, and we will be glad to work with you to have it resolved.
4. We would like to offer you a wholesale price for you if you buy a lot, just contact us!!!
5.We always are committed to building and self-help research and development of better and higher auto parts and motorcycle products. Welcome cooperation and suggestions.

CONTACT

Our working time: Monday to Friday, 9:00 -18:00

For inquires and customer support, please send your email via email system. All emails will be responded to within 24 hours during business days.

For CORVETTE C8 2020 2021 2022 2023 2024 Aluminium Engine Bay Panel Cover Silver
35.99 USD
Free shipping
4 Jack Pad Pucks Aluminum Jacking Lift Adapter for Corvette C6 C7 C8 Z06 Zr1 Z51
35.99 USD
Free shipping
2014-19 For Corvette C7 Z06 Stage 3 ABS Plastic Front Lip Splitter Side Winglets
229.99 USD
Free shipping
2020-2024 For Corvette C8 Z51 Stage 3 Gloss Black Winglet Side Skirt Extension
229.0 USD
Free shipping
Front Lip Splitter&Side Winglets Gloss Black For Corvette C7 Z06 Stage 3 2014-19
229.99 USD
Free shipping
For Corvette C7 Carbon Painted Z06 Stage 3 Front Lip Splitter + Winglets 2014-19
239.99 USD
Free shipping
Carbon For Corvette C7 Z06 Stage 3 Front Bumper Lip Splitter Side Winglets 14-19
229.99 USD
Free shipping
For Corvette C8 Z51 2020-2024 Front Mesh Grill Covers + Side Intake Grilles 4x
124.99 USD
Free shipping
RED For Corvette C8 Z51 2020-24 Side Intake Mesh Grilles Insert Guard Honeycomb
65.99 USD
Free shipping
For Corvette C8 Stingray 2020-2024 Front Radiator Grill Guard+Side Intake Grill
124.99 USD
Free shipping
For Corvette C8 Honeycomb Side Intake Mesh Grille Insert Guards 2020-2024 Red US
65.99 USD
Free shipping
RED For Corvette C8 Z51 20-24 Front Mesh Grill Cover+Side Intake Grille Insert
124.99 USD
Free shipping