For 1982-1992 Pontiac Firebird Chevrolet Camaro 2 Hatch Lift Supports Struts Gas For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

For 1982-1992 Pontiac Firebird Chevrolet Camaro 2 Hatch Lift Supports Struts Gas:
$29.99

Item Description：

Vehicle Location :Hatch
Extended Length [in] :39.09"
Compressed Length [in] :29.41"
Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
Twin Tube internal construction-Premium gas-charged cylinders
Direct fit,Ensures easy installation and precise operation
Individually tested for performance and reliability
Brand new andwarranty offered!!!

This Listing is for 2 Supports which fit the Following Applications：

For 1982-1992 Pontiac Firebird Chevrolet Camaro 2 Hatch Lift Supports Struts Gas

Item Description：

Vehicle Location :Hatch
Extended Length [in] :39.09"
Compressed Length [in] :29.41"
Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
Twin Tube internal construction-Premium gas-charged cylinders
Direct fit,Ensures easy installation and precise operation
Individually tested for performance and reliability
Brand new andwarranty offered!!!

This Listing is for 2 Supports which fit the Following Applications：

1982-1992 Chevrolet Camaro Base Coupe 2-Door Hatch
-With Spoiler or Wiper
1985-1986 Chevrolet Camaro Berlinetta Coupe 2-Door Hatch
-With Spoiler or Wiper
1988-1990 Chevrolet Camaro Iroc-Z Coupe 2-Door Hatch
-With Spoiler or Wiper
1987 Chevrolet Camaro LT Coupe 2-Door Hatch
-With Spoiler or Wiper
1989-1992 Chevrolet Camaro RS Coupe 2-Door Hatch
-With Spoiler or Wiper
1992 Chevrolet Camaro RS Heritage Edition Coupe 2-Door Hatch
-With Spoiler or Wiper
1985-1987 Chevrolet Camaro Sport Coupe 2-Door Hatch
-With Spoiler or Wiper
1985-1987 Chevrolet Camaro Z28 Coupe 2-Door Hatch
-With Spoiler or Wiper
1991-1992 Chevrolet Camaro Z28 Coupe 2-Door Hatch
-With Spoiler or Wiper
1992 Chevrolet Camaro Z28 Heritage Edition Coupe 2-Door Hatch
-With Spoiler or Wiper
1985-1987 Chevrolet Camaro Z28 Iroc-Z Coupe 2-Door Hatch
-With Spoiler or Wiper
1985-1992 Pontiac Firebird Base Coupe 2-Door Hatch
-With Spoiler or Wiper
1989-1992 Pontiac Firebird Formula Coupe 2-Door Hatch
-With Spoiler or Wiper
1982-1986 Pontiac Firebird S/E Coupe 2-Door Hatch
-With Spoiler or Wiper
1982-1992 Pontiac Firebird Trans Am Coupe 2-Door Hatch
-With Spoiler or Wiper
1989-1992 Pontiac Firebird Trans Am GTA Coupe 2-Door Hatch
-With Spoiler or Wiper
1989 Pontiac Firebird Trans Am GTA SE Coupe 2-Door Hatch
-With Spoiler or Wiper

How to Properly Install a standard Lift support？

1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.

2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.

3. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8",then pull the support away from the vehicle and it will release.

4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band slightly or damage may occur.

5. Lift Supports need to be installed fully extended. In most cases you just can't compress them unless they are on the vehicle. If you have any issues during the installation PLEASE contact us. Never force a support.

6. If the ends are not lining up the support may need to be turned. To do this attach the shaft end of the support to the vehicle and then turn the entire body of the support clockwise unit the ends line up.

Important Notes about Lift Supports：

1. Each support is tested to perform as well as the original units and in many cases to exceed the manufactures specification,please ensure you replace all thesupports in the compartment at the same time to ensure proper performance.

2. Lift supports loose pressure over time,even sitting on shelves in most auto parts stores and many of the inventory liquidators on . Our business is lift supports,and we make sure to sell newly produced units,keeping our inventory fresh and rotated.

Item SpecificsBrand hqas-accessoriesManufacturer Part Number HQ052637A01Manufacturer Warranty 1 YearPlacement on Vehicle Left,Right,RearInstallation position Liftgate,Tailgate,HatchOther Part Number 901020,95024,RB8795024,SG130001Extended Length 39.09"Compressed Length 29.41"Color BlackProduct Type Gas Spring Lift SupportFinish SmoothNumber of Pieces 2 PcsReturn Policy 30 Days Free ReturnOE Spec or Performance/Custom OE SpecGreasable or Sealed SealedMaterial SteelKit or Single Part KitModified Item NOSuperseded Part Number 901020,95024,RB8795024,SG130001Force Newtons 631NInterchange Part Number StrutsFitment Type Direct ReplacementCustom Bundle YesMounting Hardware Included No
Payment

PayPalpreferred.

Q: How do I pay for my purchase?
A: MY store accepts PayPal.
Q: When will the item be shipped out?
A: This item will be shipped with 2 business day once payment completed.
Q: Where is my tracking number?
A: Please log on your account, click "my "-->"my summary", or open your email box and find the shipping notification email.
Q: How do I return an item?
A: My tore accepts returns. Items must be returned within 60 days. Refunds will be given as money back. Please contact our customer service before you return an item. ]

We are dedicated to provide high quality products and satisfied customer service to our sincerely customers, so if there's any questions or problems with our products or service, feel free to contact us please.

Item Description：

Vehicle Location :Hatch
Extended Length [in] :39.09"
Compressed Length [in] :29.41"
Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes
Twin Tube internal construction-Premium gas-charged cylinders
Direct fit,Ensures easy installation and precise operation
Individually tested for performance and reliability
Brand new andwarranty offered!!!

This Listing is for 2 Supports which fit the Following Applications：

How to Properly Install a standard Lift support？

1. Use Safety stands whenever a procedure requires you under the vehicle or supports. Or have someone hold the lid open for you so that they can raise or lower it as needed.

2. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended length.

4. To install the new supports do the same procedure in reverse. DO NOT jam the new support end over the ball socket without lifting the U band slightly or damage may occur.

Important Notes about Lift Supports：