Thickness: 2 inch or 51 mm Vehicle bolt pattern: 8x6.69 inch or 8x170 mmWheelbolt pattern:8x6.69 inch or 8x170 mmThread Size:14x2Bolt Shack Length: 47 mmTorqued Down By Hand At: 85-90 FT/LBSHub Bore: 125 mmNumber of Pieces: 4Pcs ECCPP 4Pcs 2" 8x170 Hub Centric Wheel Spacers 14x2 For Ford F250 F350 Super Duty Thickness: 2 inch or 51 mm
Vehicle bolt pattern: 8x6.69 inch or 8x170 mm
Wheelbolt pattern:8x6.69 inch or 8x170 mm
Thread Size:14x2
Bolt Shack Length: 47 mm
Torqued Down By Hand At: 85-90 FT/LBS
Hub Bore: 125 mm
Number of Pieces: 4Pcs
Ford Excursion 2000-2002
Ford F-250 Super Duty 1999-2002
Ford F-350 Super Duty 1999-2002
Note: Factory Thread can be 14x1.5 or 14x2, pls check first.
These Spacers will Only work on the Front wheel hub which trucks with a Full Floating Rear Axle
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
What are common problems with wheel spacers?
The main issue with a wheel spacer is thatit moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are usedwhen the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.
How long can you drive on a spacer wheel?
around 50 miles
Usually, the maximum speed you can drive on a space saver wheel is 50mph, and although there is no official restriction on the distance you can travel using one, around 50 miles is generally deemed to be the maximum safe distance for usage.
Item SpecificsBrand ECCPPManufacturer Part Number ECP842312HKType Wheel SpacerQuantity 4pcsThickness 2" or 51mmVehicle Bolt Pattern 8x170mmWheel Bolt Pattern 8x170mmThread Pitch 14mm x 2 or 14x2 or M14x2Hub Center Bore 125mmColor SilverHubcentirc YesStud Grade 10.9Warranty 1 YearMaterial High Quality t6 6061 Billet AluminumPlace of delivery Ontario,CaliforniaPackage Gross Weight 23.5lbSurface Finish CNC Machined Polished Aluminum FinishLug Patterns 8 LugsTorqued Down By Hand At 85-90 FT/LBSBolt Shank Length 47mmOuter Diameter 201mmInterchange Part Number Ford F-250 Super Duty, Ford F-350 Super Duty, Ford ExcursionOther Part Number Check Thread First, 14x2 OnlySuperseded Part Number 8x170 wheel spacers 2 inch thick Item SpecificsBrand ECCPPManufacturer Part Number ECP842312HKType Wheel SpacerQuantity 4pcsThickness 2" or 51mmVehicle Bolt Pattern 8x170mmWheel Bolt Pattern 8x170mmThread Pitch 14mm x 2 or 14x2 or M14x2Hub Center Bore 125mmColor SilverHubcentirc YesStud Grade 10.9Warranty 1 YearMaterial High Quality t6 6061 Billet AluminumPlace of delivery Ontario,CaliforniaPackage Gross Weight 23.5lbSurface Finish CNC Machined Polished Aluminum FinishLug Patterns 8 LugsTorqued Down By Hand At 85-90 FT/LBSBolt Shank Length 47mmOuter Diameter 201mmInterchange Part Number Ford F-250 Super Duty, Ford F-350 Super Duty, Ford ExcursionOther Part Number Check Thread First, 14x2 OnlySuperseded Part Number 8x170 wheel spacers 2 inch thick
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
- PayPalpreferred.
ECCPP 4Pcs 2" 8x170 Hub Centric Wheel Spacers 14x2 For Ford F250 F350 Super Duty Thickness: 2 inch or 51 mm Vehicle bolt pattern: 8x6.69 inch or 8x170 mm
Wheelbolt pattern:8x6.69 inch or 8x170 mm
Thread Size:14x2
Bolt Shack Length: 47 mm
Torqued Down By Hand At: 85-90 FT/LBS
Hub Bore: 125 mm
Number of Pieces: 4Pcs
Ford Excursion 2000-2002
Ford F-250 Super Duty 1999-2002
Ford F-350 Super Duty 1999-2002
Note: Factory Thread can be 14x1.5 or 14x2, pls check first.
These Spacers will Only work on the Front wheel hub which trucks with a Full Floating Rear Axle
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
(For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
What are common problems with wheel spacers?
The main issue with a wheel spacer is thatit moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are usedwhen the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.
How long can you drive on a spacer wheel?
around 50 miles
Usually, the maximum speed you can drive on a space saver wheel is 50mph, and although there is no official restriction on the distance you can travel using one, around 50 miles is generally deemed to be the maximum safe distance for usage.
Item SpecificsBrand :ECCPPManufacturer Part Number :ECP842312HKType :Wheel SpacerQuantity :4pcsThickness :2" or 51mmVehicle Bolt Pattern :8x170mmWheel Bolt Pattern :8x170mmThread Pitch :14mm x 2 or 14x2 or M14x2Hub Center Bore :125mmColor :SilverHubcentirc :YesStud Grade :10.9Warranty :1 YearMaterial :High Quality t6 6061 Billet AluminumPlace of delivery :Ontario,CaliforniaPackage Gross Weight :23.5lbSurface Finish :CNC Machined Polished Aluminum FinishLug Patterns :8 LugsTorqued Down By Hand At :85-90 FT/LBSBolt Shank Length :47mmOuter Diameter :201mmInterchange Part Number :Ford F-250 Super Duty, Ford F-350 Super Duty, Ford ExcursionOther Part Number :Check Thread First, 14x2 OnlySuperseded Part Number :8x170 wheel spacers 2 inch thick Item SpecificsBrand ECCPPManufacturer Part Number ECP842312HKType Wheel SpacerQuantity 4pcsThickness 2" or 51mmVehicle Bolt Pattern 8x170mmWheel Bolt Pattern 8x170mmThread Pitch 14mm x 2 or 14x2 or M14x2Hub Center Bore 125mmColor SilverHubcentirc YesStud Grade 10.9Warranty 1 YearMaterial High Quality t6 6061 Billet AluminumPlace of delivery Ontario,CaliforniaPackage Gross Weight 23.5lbSurface Finish CNC Machined Polished Aluminum FinishLug Patterns 8 LugsTorqued Down By Hand At 85-90 FT/LBSBolt Shank Length 47mmOuter Diameter 201mmInterchange Part Number Ford F-250 Super Duty, Ford F-350 Super Duty, Ford ExcursionOther Part Number Check Thread First, 14x2 OnlySuperseded Part Number 8x170 wheel spacers 2 inch thick
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.