Thickness: 1.5 inch or 38 mm Vehicle bolt pattern: 5x4.5 inch or 5x114.3 mmWheelbolt pattern:5x4.5 inch or 5x114.3 mmThread Size:1/2" x 20Bolt Shack Length: 35 mmTorqued Down By Hand At: 75-85 FT/LBSHub Bore: 70.5 mmNumber of Pieces: 2pcs 2 Pcs 1.5" 5x4.5 Hub Centric Wheel Spacers 1/2"x20 For Ford Mustang Explorer Thickness: 1.5 inch or 38 mm
Vehicle bolt pattern: 5x4.5 inch or 5x114.3 mm
Wheelbolt pattern:5x4.5 inch or 5x114.3 mm
Thread Size:1/2" x 20
Bolt Shack Length: 35 mm
Torqued Down By Hand At: 75-85 FT/LBS
Hub Bore: 70.5 mm
Number of Pieces: 2pcs
1964-1973 Ford Mustang (5-Lug Only)
1994-2014 Ford Mustang
2007-2010 Ford Edge
1992-2011 Ford Crown Victoria
1983-2012 Ford Ranger (Spacer's lip may prevent fitment on front hub.)
1990-2010 Ford Explorer (Spacer's lip may prevent fitment on front hub.)
2001-2010 Ford Explorer Sport Trac (Spacer's lip may prevent fitment on front hub.)
1984-1992 Lincoln Mark 7
1981-2011 Lincoln Town Car
2003-2005 Lincoln Aviator
1997-2010 Mercury Mountaineer
1991-1994 Mazda Navajo
1998-2001 Mazda B2500
1994-2008 Mazda B3000
1994-2010 Mazda B4000
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
What are common problems with wheel spacers?
The main issue with a wheel spacer is thatit moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are usedwhen the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.
How long can you drive on a spacer wheel?
around 50 miles
Usually, the maximum speed you can drive on a space saver wheel is 50mph, and although there is no official restriction on the distance you can travel using one, around 50 miles is generally deemed to be the maximum safe distance for usage.
Item SpecificsBrand ECCPPManufacturer Part Number ECP119691HKType Wheel SpacerQuantity 2pcsThickness 1.5" or 38mmVehicle Bolt Pattern 5x4.5" or 5x114.3mmWheel Bolt Pattern 5x4.5" or 5x114.3mmThread Pitch 1/2"-20 UNFHub Center Bore 70.5mmColor BlackHubcentirc YesCentric Hub and Wheel Centric (W/Lip)Stud Grade 10.9Material High Quality t6 6061 Billet AluminumPlace of delivery Ontario,CaliforniaPackage Gross Weight 7.43 lbs.Surface Finish CNC Machined Polished Aluminum FinishLug Patterns 5 LugsTorqued Down By Hand At 75-85 FT/LBSBolt Shank Length 35mmBolt Pattern 5 on 4 1/2, 5x114.3, 5x4.5Interchange Part Number Ford Crown Victoria, Edge, Explorer, Mustang, Ranger, TaurusOther Part Number Lincoln Aviator, Town Car; Mercury Grand Marquis, MountaineerSuperseded Part Number 5x114.3 wheel spacers 1.5 inch with 1/2" Studs Item SpecificsBrand ECCPPManufacturer Part Number ECP119691HKType Wheel SpacerQuantity 2pcsThickness 1.5" or 38mmVehicle Bolt Pattern 5x4.5" or 5x114.3mmWheel Bolt Pattern 5x4.5" or 5x114.3mmThread Pitch 1/2"-20 UNFHub Center Bore 70.5mmColor BlackHubcentirc YesCentric Hub and Wheel Centric (W/Lip)Stud Grade 10.9Material High Quality t6 6061 Billet AluminumPlace of delivery Ontario,CaliforniaPackage Gross Weight 7.43 lbs.Surface Finish CNC Machined Polished Aluminum FinishLug Patterns 5 LugsTorqued Down By Hand At 75-85 FT/LBSBolt Shank Length 35mmBolt Pattern 5 on 4 1/2, 5x114.3, 5x4.5Interchange Part Number Ford Crown Victoria, Edge, Explorer, Mustang, Ranger, TaurusOther Part Number Lincoln Aviator, Town Car; Mercury Grand Marquis, MountaineerSuperseded Part Number 5x114.3 wheel spacers 1.5 inch with 1/2" Studs
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
- PayPalpreferred.
2 Pcs 1.5" 5x4.5 Hub Centric Wheel Spacers 1/2"x20 For Ford Mustang Explorer Thickness: 1.5 inch or 38 mm Vehicle bolt pattern: 5x4.5 inch or 5x114.3 mm
Wheelbolt pattern:5x4.5 inch or 5x114.3 mm
Thread Size:1/2" x 20
Bolt Shack Length: 35 mm
Torqued Down By Hand At: 75-85 FT/LBS
Hub Bore: 70.5 mm
Number of Pieces: 2pcs
1964-1973 Ford Mustang (5-Lug Only)
1994-2014 Ford Mustang
2007-2010 Ford Edge
1992-2011 Ford Crown Victoria
1983-2012 Ford Ranger (Spacer's lip may prevent fitment on front hub.)
1990-2010 Ford Explorer (Spacer's lip may prevent fitment on front hub.)
2001-2010 Ford Explorer Sport Trac (Spacer's lip may prevent fitment on front hub.)
1984-1992 Lincoln Mark 7
1981-2011 Lincoln Town Car
2003-2005 Lincoln Aviator
1997-2010 Mercury Mountaineer
1991-1994 Mazda Navajo
1998-2001 Mazda B2500
1994-2008 Mazda B3000
1994-2010 Mazda B4000
1. Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
2. Measure the fender gap and stock bolt length to choose suitable thickness.
3. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters, they are different. Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
4. Do not use impact wrench.Please use hand wrench. Recommended to use threadlocker.
5. Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
What are common problems with wheel spacers?
The main issue with a wheel spacer is thatit moves the wheel to a wider position whilst the rest of the suspension arms remain in the same place. In particular, the king pin inclination axis remains in the same place. Therefore, fitting a wheel spacer moves the wheel outboard and alters the scrub radius of the car.
How do I know if I need wheel spacers?
Wheel spacers are usedwhen the offset of the wheel is not ideal for the end package that you want. Whether it's because of too narrow of axles or not enough wheel offset, wheel spacers can put your tires and wheels where you want them to be under your fender.
How long can you drive on a spacer wheel?
around 50 miles
Usually, the maximum speed you can drive on a space saver wheel is 50mph, and although there is no official restriction on the distance you can travel using one, around 50 miles is generally deemed to be the maximum safe distance for usage.
Item SpecificsBrand :ECCPPManufacturer Part Number :ECP119691HKType :Wheel SpacerQuantity :2pcsThickness :1.5" or 38mmVehicle Bolt Pattern :5x4.5" or 5x114.3mmWheel Bolt Pattern :5x4.5" or 5x114.3mmThread Pitch :1/2"-20 UNFHub Center Bore :70.5mmColor :BlackHubcentirc :YesCentric :Hub and Wheel Centric (W/Lip)Stud Grade :10.9Material :High Quality t6 6061 Billet AluminumPlace of delivery :Ontario,CaliforniaPackage Gross Weight :7.43 lbs.Surface Finish :CNC Machined Polished Aluminum FinishLug Patterns :5 LugsTorqued Down By Hand At :75-85 FT/LBSBolt Shank Length :35mmBolt Pattern :5 on 4 1/2, 5x114.3, 5x4.5Interchange Part Number :Ford Crown Victoria, Edge, Explorer, Mustang, Ranger, TaurusOther Part Number :Lincoln Aviator, Town Car; Mercury Grand Marquis, MountaineerSuperseded Part Number :5x114.3 wheel spacers 1.5 inch with 1/2" Studs Item SpecificsBrand ECCPPManufacturer Part Number ECP119691HKType Wheel SpacerQuantity 2pcsThickness 1.5" or 38mmVehicle Bolt Pattern 5x4.5" or 5x114.3mmWheel Bolt Pattern 5x4.5" or 5x114.3mmThread Pitch 1/2"-20 UNFHub Center Bore 70.5mmColor BlackHubcentirc YesCentric Hub and Wheel Centric (W/Lip)Stud Grade 10.9Material High Quality t6 6061 Billet AluminumPlace of delivery Ontario,CaliforniaPackage Gross Weight 7.43 lbs.Surface Finish CNC Machined Polished Aluminum FinishLug Patterns 5 LugsTorqued Down By Hand At 75-85 FT/LBSBolt Shank Length 35mmBolt Pattern 5 on 4 1/2, 5x114.3, 5x4.5Interchange Part Number Ford Crown Victoria, Edge, Explorer, Mustang, Ranger, TaurusOther Part Number Lincoln Aviator, Town Car; Mercury Grand Marquis, MountaineerSuperseded Part Number 5x114.3 wheel spacers 1.5 inch with 1/2" Studs
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.