DESCRIPTION
Aftermarket, JapaneseIgnition Coil For 40cc /41cc / 41.5cc / 42cc E-Ton Brand Engines.
THIS COIL REQUIRES MINOR MODIFICATION BECAUSE IT IS THE LARGER, HOTTER RUNNING COIL. BETTER PERFORMANCE, NOT JUST THE SAME AS THE STOCK GREEN.
Commonly Found On E-Ton Rascal / Viper / RXL / IXL Mini ATV\'S & Belt Drive Scooters.
Eliminates All The Problems These Machines Have With Coil Failures.
Here is a guide we made to install this coil. The other places selling these don\'t show you this.
I have done this to a few Eton motors now eliminating the need for the ignition module that is prone to failure. The RC coil also produces better spark making it easier to start the motor. I just thought there was others that could benefit from this. It\'s pretty straight forward and easy. I mill mine but it can also be done with a dremel pretty easy.Step 1. you must remove a small amount of the material from the fan cover. The pic pretty much explains that.
Step 2. You have to remove a small amount of material enlarging the bolt holes in the coil. You don\'t have to do this to all eton motors for some reason so check to make sure yours is striking the flywheel before dremeling/milling out the bolt holes
Last step. Install the coil. I usually bolt it down but not tight. Then I slip the fan cover in place and use a business card to set the gap. the I just reach in with a small wrench and snug the bolts down so the coil doesn\'t move when I remove the fan cover to torque them down.
ALL ITEMS SHIP IN 24 HOURS OR LESS.