Note installed photos show dual can vented setup, this is a single can with inputs for both sides instead of two cans with a single input.
[link removed by ]
Installation Instructions / Application Note:
[link removed by ]
[link removed by ]
Please contact us with application questions to ensure you choose the best kit!!
Overview:
Blow-by gasses vented from the PCV system contain oil and fuel that can be ingested back into the intake manifold and airbox. This “sludge” can contaminate and reduce flow through the air filter, reduce the effective octane rating of fuel, increase chance of knock / detonation, reduce power, and fuel economy. Catch cans condense and filter oil and fuel from blow-by gasses and reduce or eliminate the amount of contaminants entering the engine.
These kits are a convenient solution to allow you to mount a vented or sealed catch can system without otherwise modifying your 2013+ Viper. Hoses, clamps, fittings, catch can, and brackets required for installation as shown are included.
- Non invasive: No drilling.
- Bracket clamps around the front or side crossbars, the design reduces potential marking or damage of the bar.
- Easy and quick installation, three screws install the bracket.
- Universal fit allows Catch can to be mounted in multiple DSE dual input vented and single input sealed catch cans locations around the engine bay.
- Lightweight, pocketed design; billet aluminum.
- Durable hard anodized finish.
Catch can setup depends on personal preference and expected vehicle usage. Typically a sealed catch can setup is used for a vehicle driven on the street, while a vented setup is preferred for the track. Both setups are equally effective at cleaning blow by gasses. A sealed system keeps the emissions system intact and inserts the can inline to collect oil/fuel.
A vented system removes the PCV valve and system and vents the filtered air into the atmosphere instead of back into the engine. Typically used for track only cars and can produce fumes that could be undesired for the street. Relief of excess pressure and drag from the engine components and may provide a performance advantage under high RPM/load. Since the oil is exposed to the atmosphere, more frequent oil changes are recommended as is typical with trackonly vehicles. A vented setup will collect oil from both valve covers with one can, while a sealed setup requires two cans or choosing between passenger side only or driver side only setups.
For those with 2013-2015 Vipers that have not been modified to 2016+ specs a driver’s side catch can will prevent oil from entering the airbox and contaminating the air filter which is more likely on these cars. If the vehicle is 2016+ or has been updated, a passenger side can should be sufficient to collect excess oil but the air filter should be monitored for excess oil.
Bracket: 6061-T6 Aluminum (Black anodize, type III hardcoat), Stainless Steel Hardware
Catch Can: Mishimoto Compact Baffled 2 and 3 Port Catch Can
Typical application:Economical track-only setup for 2013+ cars
Package Contents:
-Dualinput vented can,bracket, PCV delete adapter,4 barbed hose splices,10 feet of hose, 2 caps, ty-wraps
Catch Can Design:
Incoming air is directed in a rotational pattern by the deflector on the input port to allow the oil/fuel more time to condense on the baffle. The aluminum baffle promotes condensation but also serves to contain the liquid at the bottom of the can during track running. Finally the air exiting the can is filtered by a 50 micron bronze filter to ensure complete separation of air and contaminants. All of the components are removable and washable for a lifetime of use.
Please view our other sales for other Doge / SRT Viper parts!
About DSE:
Using motorsport inspired materials and design processes; DSE is able to bring the automotive aftermarket closer to IndyCar, ALMS, F1, and NASCAR. Many OEM and aftermarket parts would not live up to the standards of professional motorsport. Our goal is to provide products that improve the strength, weight, function, fit, quality, and appearance of the OEM or aftermarket part using design techniques and materials that have been race proven. We will not produce something that does not significantly improve upon the original design. Our attention to detail and continued passion for motorsport and automotive performance means you\'ll get a high quality product at a reasonable cost.
