button covering is peeling and cracked
Attention:
Please note there are several compatible remotes that look similar but not exactly like the photo pictured. We will do our best to ship you the remote pictured; however, the remote you receive may look different than the remote pictured. No worries, the board will program to your system the same.
See pictures for an example of what you will receive.
One (1)
Aftermarket Security Installed Systemremote
keyless entry fob alarm controller
Transmitter control clicker keyfob controller replacement
VIPER PYTHON DEI DIRECTED ELECTRONICS CLIFFORD MATRIX
FCC ID: EZSDEI7153
(Alternate Spelling: EZSDEI7153)
Part #: Part #: 7153P
(Interchangeable) Part #s:
7152X 7152V 7251P 7251V
7251X 7153P 7153X 7153V
One 1- way
LED Light Color: Orange
Buttons: 5: Lock, Unlock, Remote Starter, AUX, f; LED Orange
Frequency: 433-434 MHz
Battery: 1; CR2032 or 2: CR2016’s
See Item Specifications for more details
Compatible with the following Aftermarket installed security systems:
Viper
Viper 5101
Viper 5301
Viper 5501
Viper 5601
Viper 5701
Viper 5901
Python
Python 872 LE
Python 580 LE
Clifford Matrix
Clifford Matrix 1.3X
Clifford Matrix 3.3X
Programming Instructions:
A Valet / Programming switch is required to program this remote.
Programming can be difficult if you are not familiar with it. Please read the programming instructions (below) before purchasing. Assistance from an auto specialty shop or locksmith may be needed.
Programming Instructions:
PREPARE VEHICLE FOR REMOTE LEARNING:
1. Door. Open a door.
2. Key. Turn the key to the ON position.
3. Choose. Within 5 seconds press and release the Valet/Program button on the system CONTROL CENTER one time.
4. Select. Within 5 seconds, press & HOLD the Valet/Program button on the system CONTROL CENTER.
LED will flash one time and the siren (if connected) will chirp to confirm vehicle is ready for the remote pairing.
5. Ready. Release the Valet/Program button & proceed as follows.
The following instructions will direct you through the available programming options.
1. Press and hold the F button for 8 seconds, the remote emits one long beep and the transmit LED turns on.
2. Press and hold the START button for 1 second, 3 transmit LED flashes and 3 beeps indicate remote is ready to pair.
3. Press and release 1 time the Integrated Programming Button (IPB) on the XL202.
4. Within 5 seconds, press and hold the IPB. The status LED will flash one time to confirm the system is ready for remote pairing.
5. Press the LOCK button
Please Note:
For transmitter learn Step #1, you must press the (*) button on the transmitter, this will automatically program the transmitter buttons to the default function configuration. See the transmitter button auto learn chart for the assignment functions.
1-way remote control: there is no confirmation for this remote control.
6. Release the IPB. Remote programming will exit by itself after 30 seconds and the transmit LED will turn off.
Note:
Consult the installation center for the location of the XL202 or refer to dealer for programming.
REMOTE FEATURES:
1. Press and hold the F button for 8 seconds, the remote emits one long beep and the transmit LED turns on.
2. Press the UNLOCK button to access the remote operation features, 2 transmit LED flashes and 2 beeps indicate the remote features menu is accessed. Press the buttons indicated in the tables below to set the feature option.
3. The LEDs next to the button(s) indicate the feature settings
Feature Button Press LED ON LED OFF LED Flash
Keypad Lock LOCK Auto Off
Remote Beeps UNLOCK Beeps On Beeps Off Triggers only
EXIT PROGRAMMING:
How to find out if this remote is compatible with your Vehicles’ installed RKE System
If you\'re notsure your vehicle can use this remote, please ask questions or contact your local dealer first.
Your vehicle will be installed with one of the following keyless entry systems:
a. Standard Keyless Remote Packages: Installed at time of manufacture.
b. Optional Keyless Remote Packages: Installed by a dealer.
c. Aftermarket Keyless Remote Packages: Installed by previous owner or a car/audio shop.
d. No remote keyless entry system at all.
The above information can change which remote you need
for your installed remote keyless system.
Does this keyless remote entry come with a battery?
Yes. It will have a working battery installed.
Battery Condition:
A. All remotes sold on Keyless4u include working batteries.
B. Installed batteries are not tested for battery life- they are simply working.
Some are new and some are used.
.
.
.
.
.
.