About All Items See our store for more great items >> Shop CategoriesOther Clifford 7151X EZSDEI7151 keyless entry remote controller transmitter alarm phob Item Description
THIS ITEM ISPRE-OWNED – IT WILL WORK LIKE NEW ONCE PROGRAMMED TO YOUR VEHICLE
Paint on remote's surface is very faded
ONE (1) PRE-OWNED
FUNCTIONSAT 100% TESTED & GUARANTEED
CLIFFORD
FCC ID: EZSDEI7151
PART #: RRN 7151X
AT-7141X
EZSDEI470
EZSDEI471
EZSDEI474
EZSDEI475
EZSDEI476
EZSDEI485
EZSDEI7131
EZSDEI7141
EZSDEI7151
FREQUENCY: 434 MHZ
LED COLOR: Blue led
5 BUTTONS
COMPATIBLE W/ THE FOLLOWING SYSTEMS:
Arrow
5.1
Concept
Avantguard
5.1
Intelliguard
770
Clifford Matrix
12
12.2X
12.5X
70.5
PROGRAMMING THESE REMOTE(S)
Be sure to document changes by taking note of all feature changes made in programming mode. To enter the User Selectable Features programming:
1. Ignition on - Turn the ignition to the run position or start the engine.
2. Enter PIN - Enter the factory preset PIN code of 2 by pressing once.
3. Hold/Chirp/Release - After entering the PIN code, press and Hold release the button. You have now entered the feature selection position of the User Selectable Features grid.
4.Column select - Press desired column. After a pause the siren will chirp the same number of times as the selected column for confirmation.
5.Feature select - Press desired feature. The siren will chirp with each press. The feature can now be changed using the remote control.
6. Feature change - Press tem chirps once, the feature has just turned off; if the system chips twice, the feature has just turned on. If the feature has more than two settings, continue pressingon the transmitter to toggle through the settings.You can advance to any feature in the same column by pressing different column begin at step 4 within 60 seconds.
.
7.Exit programming - To exit programming mode turn the ignition off or wait 60 seconds without pressing the PlainView 2Valet switch. The siren will chirp three times to indicate programming mode has been exited.
OUR REMOTES HAVE BEEN UV I.D'd w/UV TAGS with our LOGO on inner & outer components –
All returns receive a UV IDinspection to verify originality of remote sent prior to refund or replacement.
Does this keyless remote entrycome with a battery?
Yes. It will have a working battery installed.
About Us