PCE435.1002 Brand: PCE Part Number: PCE435.1002 Part Type: Cylinder Head Combos Product Line: SuperStreet Series Camshaft Included: No Intake Manifold Included: Yes Fuel Delivery Style: Carbureted Intake Material: Aluminum Intake Finish: Natural Carburetor Quantity: One Intake Style: Single plane with divider Intake Basic Operating RPM Range: 1,500-6,500 Intake Manifold Height: 4.650 in. Intake Manifold Model (descriptive): PCE - Eliminator Series Timing Chain and Gears Included: No Lifters Included: No Gaskets Included: Yes Cylinder Head Style: Assembled Cylinder Head Material: Aluminum Cylinder Head Finish: Natural Combustion Chamber Volume (cc): 64 cc CNC-Machined Combustion Chamber: No Intake Runner Volume (cc): 190 cc CNC-Machined Intake Runner: No CNC-Machined Exhaust Runner: No Intake Port Shape: Square Intake Port Location: Standard Exhaust Port Shape: Square Exhaust Port Location: Standard Spark Plug Style: Angle Comp. Valve Job: No Intake Valves Included: Yes Intake Valve Diameter (in): 2.020 in. Exhaust Valves Included: Yes Exhaust Valve Diameter (in): 1.600 in. Intake Valve Angle: 23 deg. Exhaust Valve Angle: 23 deg. Valve Springs Included: Yes Outside Diameter of Outer Spring (in): 1.450 in. Damper Spring Included: Yes Number of Springs Per Valve: Dual Retainers Included: Yes Retainer Material: Chromoly steel Locks Included: Yes Lock Style: 10 degree Valve Stem Seals Included: Yes Valve Stem Seal Style: Positive stop Rocker Arms Included: Yes Rocker Arm Studs Included: Yes Rocker Arm Nuts Included: Yes Rocker Arm Nut Thread Size: 7/16-20 in. Guideplates Included: Yes Guideplate Pushrod Size: 5/16 in. Pushrods Included: No Valve Covers Included: Yes Valve Cover Material: Cast aluminum Valve Cover Finish: Polished Valve Cover Mounting Style: Perimeter bolt Accessory Bolt Holes Drilled: Yes Valve Guides Included: Yes Valve Guide Material: Bronze Valve Seats Machined: Yes Valve Seat Machine Style: 3-angle Valve Seat Material: Ductile iron Steam Holes Drilled: No Oiling Style: Through pushrod Machined for O-Ring: No Heat Crossover: No Cylinder Head Bolts Included: No Quantity: Sold as a kit. Calculator: CFM Calculator Calculator Compression Calculator
Don\'t spend hours figuring out which pieces and parts you need to get what you want from your engine. PCE has already done the work for you; our Top-End engine kits will save you the time and hassle of mixing and matching components yourself. These kits are specifically designed to deliver the performance you want, at a better price than purchasing the parts separately.
Kits include:
Fully assembled PCE cylinder heads
Intake manifold
Valve covers
Intake manifold gaskets
Roller rockers
Guideplates
Screw in studs
Assembly Specifications
Max Lift: .580
Coil Bind: .740
Intake Install: 130lbs @ 1.8
Exhaust Install: 130lbs @ 1.8
Closed Sear Pressure: 125lbs
Open Seat Pressure: 320lbs
Intake Manifold Information
The new Eliminator Manifold is a special version of the qualifier series. While it is the exact same height, it features an open area under the plenum chamber. This provides for a flow of cooling air which keeps the temperature of the air/fuel charge lower thus producing more power and torque.
The interior plenum and port design are identical to the qualifier series and will provide somewhat better overall power than the qualifier series due to the special air gap style design.
Intake Manifold Gasket Information
PCE intake manifold gaskets have Printoseal construction, which puts beads of special elastomers around the ports for extra sealing power. They also feature a non-metallic, rubber-fiber base material that resists gasoline and alcohol, while allowing engine builders to precision-trim around the intake ports.
Cylinder Heads Suggested Parts
Head Gaskets
The head gasket we recommend for our 23deg. heads used on 327/350/383/400 SBC engines without steam holes is Felpro #1003. On engines using the GM 400 block, or aftermarket blocks with steam holes, use PCE PCE348.1006 or Felpro #1014.
Push Rods
Our aluminum 23deg. heads typically use +.100\" (longer than stock) pushrods, Depending on the components used, it is possible that you may need pushrods shorter or longer than that so we recommend that you use an adjustable pushrod to dial in your rocker geometry and order pushrods to match.
Spark Plugs
All PCE 23deg. SBC heads use standard 14mm. x 750\" reach, 5/8 hex, gasket seat sparkplugs like NGK R5671A-7, Autolite 3924, Champion RC12YC, etc. Remember that higher compression/ boost require a colder heat range sparkplug.
Head Bolts / Studs
Our 23 degree heads utilize standard head bolts or studs. Our part number for head bolts is PCE279.1002, and the head studs are PCE279.1001. For the 15 degree heads, we recommend SM2451-15DEG. headstud kit with 3/8\" reduced shank on the studs between intake ports. The ARP head bolt part number is 134-3601, and ARP head studs 234-4301 for the 23 degree heads. ARP also makes a head stud kit that is compatible with our 15deg. heads on cast iron blocks with part number 234-4723.
Exhaust Gaskets
We recomend the use of our Exhaust gaskets # SM5120 or Fel-Pro #1405 on our 23 degree heads. On our 15 degree heads, use SM5121 or Fel-Pro #1409.
Roller Rockers Information
PCE High Performance Aluminum Roller Rockers are extruded from 6061 T6 Aluminum. The larger needle bearing fulcrum can withstand valve spring loads up to 350lbs. Ideally suited for use with flat tappet roller cams. They feature very precise valve operation, horse power increase of 10-15, increases valve train life dramatically, acceleration is more responsive, oil temp will run approximately 5-10 degrees cooler.
