Brand New Aluminum Radiator for 90-96 Honda Prelude Accord 2.2L L4 Fits CU19 For Sale - New and Used

When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Brand New Aluminum Radiator for 90-96 Honda Prelude Accord 2.2L L4 Fits CU19:
$53.89

Newest Fitment:

1990-1993 Honda Accord 2.2L

1992-1996 Honda Prelude design to ensure exact fit, form and function for an easy drop-in installation;

-Built with high density multi-lowered fins for maximum cooling efficiency;

-ISO 9001 certified manufacturing plants;

-Direct Replacement;

-Improve Cooling Efficiency;

-100% Leak Tested;

-Plastic tanks with aluminum core;

-Built to strict quality control PRELUDE VTEC L4 2.2L 1996 1995 1994 1993HONDA PRELUDE S L4 2.2L 1996 1995 1994 1993 1992HONDA ACCORD L4 2.2L 1993 1992 1991 1990

HONDA PRELUDE 1996

Brand New Aluminum Radiator for 90-96 Honda Prelude Accord 2.2L L4 Fits CU19

Newest Fitment:

1990-1993 Honda Accord 2.2L
1992-1996 Honda Prelude 2.2L

Features:

-OE design to ensure exact fit, form and function for an easy drop-in installation;

-Built with high density multi-lowered fins for maximum cooling efficiency;

-ISO 9001 certified manufacturing plants;

-Direct Replacement;

-Improve Cooling Efficiency;

-100% Leak Tested;

-Plastic tanks with aluminum core;

-Built to strict quality control PRELUDE VTEC L4 2.2L 1996 1995 1994 1993
HONDA PRELUDE S L4 2.2L 1996 1995 1994 1993 1992
HONDA ACCORD L4 2.2L 1993 1992 1991 1990

HONDA PRELUDE 1996

HONDA PRELUDE 1995
HONDA PRELUDE 1994
HONDA PRELUDE 1993
HONDA PRELUDE 1992

HONDA ACCORD 1993
HONDA ACCORD 1992
HONDA ACCORD 1991
HONDA ACCORD 1990

Specifications:

Core Material Aluminum Tank Materia Plastic Row 1 Height 14 Width 25-7/8 Thickness 1 Inlet Header 27 x 2 Outlet Heade 27 x 2 Inlet 1-1/4 Outlet 1-1/4 EOC None TOC Concentric; 1-1/8-in. Diameter; 12-13/16-in. Distance; Hose Barb 10mm

How to clean radiator:

1.Start the vehicle, to rise to normal temperature. Slowly open the tank cover, the fluid shake fromthetank after filling the mouth, the cleaner can be mixed with any brand of coolant. Idle running not less than 15 minutes, not cleaning vehicles not less than 30 minutes for two years. And then discharge coolant, flush water tank, until out of clear water, suitable for any water cycle system.

2.After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.

How to replace the radiator:

1.Disconnect the battery.

2.Drain the radiator fluid into a suitable container.

3.Remove the old radiator:

-Take off any plastic covers around the radiator.

-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.

-Disconnect the radiator hoses from the radiator.

-Disconnect the transmission cooling lines from the bottom of the radiator.

-Remove any clamps, brackets, or screws holding the radiator inside its frame.

-Lift the radiator up and out of the car.

4.Install the new radiator:

-Slide the new radiator into place.

-Connect any clamps or brackets that hold the radiator in place.

-Connect the transmission cooling lines carefully.

-Connect the engine cooling hoses to the radiator.

-Replace the fan and fan shroud.

-Reconnect the fan electrical connection.

-Replace the plastic covers.

5.Fill the radiator with fluid.

6.Check your work to make sure that there are no leaks.

(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)

Note: Do please keep children and pets away when replacing the operation, the vehicle normal temperature 60 to 80 degrees.

2.Add detergent if the tank is too full can take some of brand new radiator

Item SpecificsPlacement on Vehicle FrontWarranty 1 YearManufacturer Part Number E05424701CPType RadiatorInterchange Part Number CU19, HO3010155, 19010PT1901Other Part Number 19010PT1902, 19010PT1903UPC 606462288460Brand ECCPPFitment Type Direct ReplacementHeight 14 In.Width 25-7/8 In.Thickness 1 In.Weight 11bsTank Material PlasticCore Material Aluminum Item SpecificsPlacement on Vehicle FrontWarranty 1 YearManufacturer Part Number E05424701CPType RadiatorInterchange Part Number CU19, HO3010155, 19010PT1901Other Part Number 19010PT1902, 19010PT1903UPC 606462288460Brand ECCPPFitment Type Direct ReplacementHeight 14 In.Width 25-7/8 In.Thickness 1 In.Weight 11bsTank Material PlasticCore Material Aluminum
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

PayPalpreferred.

Newest Fitment:

1990-1993 Honda Accord 2.2L
1992-1996 Honda Prelude 2.2L

Features:

-OE design to ensure exact fit, form and function for an easy drop-in installation;

-Built with high density multi-lowered fins for maximum cooling efficiency;

-ISO 9001 certified manufacturing plants;

-Direct Replacement;

-Improve Cooling Efficiency;

-100% Leak Tested;

-Plastic tanks with aluminum core;

-Built to strict quality control PRELUDE VTEC L4 2.2L 1996 1995 1994 1993
HONDA PRELUDE S L4 2.2L 1996 1995 1994 1993 1992
HONDA ACCORD L4 2.2L 1993 1992 1991 1990

HONDA PRELUDE 1996

HONDA PRELUDE 1995
HONDA PRELUDE 1994
HONDA PRELUDE 1993
HONDA PRELUDE 1992

HONDA ACCORD 1993
HONDA ACCORD 1992
HONDA ACCORD 1991
HONDA ACCORD 1990

Specifications:

How to clean radiator:

2.After cleaning, after waiting for pipeline rehabilitation add fluid to water tank, and inject new coolant and water purification.

How to replace the radiator:

1.Disconnect the battery.

2.Drain the radiator fluid into a suitable container.

3.Remove the old radiator:

-Take off any plastic covers around the radiator.

-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.