Barracuda Mk II, offroad, mini dune buggy, sandrail plans on CD disc. NEW For Sale - New and Used

THE BARRACUDA Mk II

BARRACUDA MK II STEPS UP THE GAME ONCE AGAIN...

The Barracuda is without a doubt the most popular and successful motorcycle engined buggy in the world. Over the last 12 years of success Edge Products have been listening to customer response as well as developing in-house upgrades and tweaks. These improvements have been rolled together to give the Barracuda Mk II. The core performance and driveability of the Barracuda are as strong as ever, while strength and reliability have been taken to new heights.

WHAT\'S NEW?

The Barracuda Mk II\'s biggest changes are the rear suspension unit and the front upper arms and uprights. The Barracuda’s original PIRCV rear suspension has been overhauled into the tougher CV2 unit, originally developed for the X2 buggy with tougher arms and driveline and more brake options. The CV2 reverse also integrates electric reverse.

The Barracuda’s front upper suspension arms have been replaced with a two-piece design which is easier to fabricate and provides more adjustability. These work in conjunction with taller uprights which run twin-piston XVS calipers and larger brake rotors. The Barracuda front suspension is now fully interchangeable with the X2 buggy.

On the chassis side, the Barracuda Mk II introduces a fabricated hip frame for ease of construction, several structural improvements and an aluminium high-capacity fuel tank.

A WHOLE NEW LEVEL...

The Barracuda has taken the Mini buggy concept to a whole new level of technical advancement & sophistication. More than 25 years of Mini buggy design, development & thousands of buggies manufactured has resulted in the Barracuda, a lean & aggressive long travel buggy that you can build yourself.

COMBINING THE BEST DESIGN FEATURES...

The Barracuda combines the best design features from past Edge buggies into one high-performance package. Aggressive styling, the latest CV rear suspension technology & classic Edge toughness are all drawn from our stable of past vehicles.

SUPER LONG SUSPENSION TRAVEL...

An all new Double A arm front suspension design features rod end camber & castor adjustment & super long suspension travel at 500mm (20”).

TALLER THAN AVERAGE? NO PROBLEM...

More internal room to suit drivers up to 6’ 7” tall, (2.0m) more elbow room & a rollcage structure designed with the aid of computer stress analysis has resulted in a tough chassis to absorb the harshest offroad conditions.

EASY & COMPREHENSIVE PLANS

The Barracuda plans is a comprehensive 230 pages with lots of 3D images. They can be purchased in a printed book or in digital form ready for immediate download (and at a discounted price).

These detail every chassis & suspension part that needs to be made along with parts lists, nuts & bolts lists & material lists. Laid out in 3D views with 2D dimensioned detailed drawings the Barracuda plans detail the complete chassis, front & rear suspension, brakes, pedals, all brackets, fuel tank, floor pan, roof plate, nose plate, bonnet, bulkhead plate, engine bash plate, complete steering including rack mount & steering column & gearshift setup. In fact, every single part that needs to be made.

The Barracuda plans explain the chassis construction in a \"step by step\" format starting with the base frame & building the chassis from the ground up to make construction easier for the home builder. Suspension arms & components are broken down into their individual parts for ease of manufacture.

In fact it’s such as serious buggy it won theNew ZealandNational Mickey Thompson offroad series in 2012 & 2013. And it was up against race spec Raceco & Jimco Baja type buggies………..and beat them all.

PLEASE NOTE: For sale here arePLANSonly, (Blueprints)whichis adetailed book with CADdrawings & instructions on how to build the Barracuda buggy on CD disc.

This is NOT THE BUGGY ITSELF.

Barracuda Plans are on CD disc in PDF format & will be posted to you.

Plans are $89.00

Postage is FREE

COST TO BUILD THE BARRACUDA Mk II:
Buying the raw materials, fabricating and welding the Barracuda parts yourself to the plans will cost approximately $7,500 to $10,000 dollars minus motor.

Depending on how much of the componentry you produce yourself.

And if there’s a part that you don’t want to make you can buy it from the Edge Products.

PLEASE NOTE: For sale here arePLANSonly, (Blueprints)whichis adetailed book with CADdrawings & instructions on how to build the Barracuda buggy on CD disc.

This is NOT THE BUGGY ITSELF.

Barracuda Plans are on CD disc in PDF format & will be posted to you.

Plans are $89.00

Postage is FREE

SUITABLE ENGINE TYPES:

The Barracuda is designed to suit large capacity water cooled road bike engines.

Any large capacity engine can be used as long as it is of a chain drive design.

Engines from 600cc right up to the latest ZX14R Kawasaki or Suzuki GSXR1300 Hayabusa can be used depending on the level of performance required.

BARRACUDA SPECIFICATIONS:

Chassis:

RHS section floor, full round tube chassis & tubular roll cage structure

Safety:

Tough rollover chassis structure with diagonal bracing, 5 point race harness.

Steering:

Quick turn racing rack & pinion

Motor:

Road bike engines, water cooled (chain drive type) from 600cc to 1400cc

Transmission:

Motorcycle 6 speed sequential Gearbox

Front Suspension:

Double \"A\" Arm independent, Rod end adjustable camber & castor with coil-over shocks, 500mm, (20”) wheel travel

Rear Suspension:

Double \"A\" Arm independent, 930 CV axles, Rod end adjustable camber & toe settings with coil-over shocks, 400mm, (16”) wheel travel

Driveline:

530 chain driving centre cartridge & Porsche 930 CV’s

Brakes Front:

207mm disc rotor on each wheel with twin piston hydraulic caliper

Brakes Rear:

Single centre mounted 312mm disc with twin piston hydraulic caliper

Front Wheels:

25x8.00x12” tyres on 12x6” rims

Rear Wheels:

26x12.00 x12 Tyres on 12x10.5” rims

Overall Length:

3000mm, (118”) (outside of tyre to outside of tyre)

Overall Width:

1930mm, (76”) (outside of tyre to outside of tyre)

Overall Height:

1566mm, (62”) (ground to top of rollbar)

Track (rear):

1535mm, (60”) (hub face to hub face)

Track (front):

1654mm, (65”) (hub face to hub face)

Wheelbase:

2330mm, (92”) (centre of axle to centre of axle)

Approx. Weight:

400-450kg, (900 lb)

Ground Clearance:

Minimum 300mm, (12”) 618mm clearance at nose, (24”)

Top Speed:

120-190 kph, (75 – 120mph) depending on engine type & gearing.

Acceleration:

0-100 kph, (60mph) in 4.5 seconds

But above all, if you don’t want to make the parts you can purchase components for the Barracuda from The Edge Products.

PLEASE NOTE: For sale here arePLANSonly, (Blueprints)whichis adetailed book with CADdrawings & instructions on how to build the Barracuda buggy on CD disc.

This is NOT THE BUGGY ITSELF.

Barracuda Plans are on CD disc in PDF format & will be posted to you.

Plans are $89.00

---