Fast-Autos.net


Search for a different part:

AEM V3 Water / Methanol Multi Input Injection Kit w/ 1.15 Gallon Tank 30-3350 For Sale - New and Used


AEM V3 Water / Methanol Multi Input Injection Kit w/ 1.15 Gallon Tank 30-3350
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

AEM V3 Water / Methanol Multi Input Injection Kit w/ 1.15 Gallon Tank 30-3350 :
$481.95

AEM V3 Water / Methanol Multi Input Injection Kit w/ 1.15 Gallon Tank CARB LegalNot for sale or street use in CA & CARB states.
BRAND NEW IN BOX

THE AEM WATER/METHANOL INJECTION SYSTEM ADVANTAGE


Water/methanol injection for forced induction (turbocharged or supercharged)gas-powered race engines is a proven means for effectively reducing engineinlet air temperatures and suppressing harmful detonation. This allows racersto reliably increase boost and advance ignition timing—without usinghigh-octane racing fuel—for power gains of up to 20%. AEM’s Water/MethanolInjection Systems utilize the most robust hardware combined with more advancedfeatures than any other comparably priced water/methanol system.

Water/Methanol for All Boost Levels of Forced Induction GasRace Engines
AEM offers two different water/methanol controller designs for gas vehicles:

One is boost dependent for forced induction vehicles up to35 PSI of boost (kit PN 30-3300). The Boost Dependent controller has anon-board manifold absolute pressure (MAP) sensor with a molded-in nipple for aboost hose pickup.

The second controller (Kit PN 30-3350) features a multipleinput design that enables users to install AEM’s Water/Methanol Injection Kiton ultra-high boost vehicles (above 35 PSI) using a 0-5v voltage-based externalMAP sensor.

Robust, Easy to Use Controller Designs

The new controller designs (Boost Dependent Kit PN 30-3300 & Multi InputKit PN 30-3350) feature large, turn-resistant knobs and larger numbering toeasily set accurate start and full activation points, with covered status LEDand test buttons for added splash resistance. A plug is integrated into thecontroller housing for mating to the redesigned wiring harness’s positive-lockconnector. The Boost Dependent controller housing has a molded-in, barbednipple to accept a boost hose and a wiring legend on the back. Both controllerhousings feature an easy to access integrated fuse and molded mounting tabs.

Simplified Wiring

AEM’s Water/Methanol Injection kit’s wiring harness is terminated with apositive-lock connector on one end and has color-coded wires to ease installation.Both the power and ground wires for the pump are included in the harness whichsimplifies the wiring process and eliminates any chance of the pumpaccidentally activating from a short in the system. An additional wire isincluded for adding an optional on/off solenoid to stop fluid flow when thesystem is inactive.

Integrated Boost Safe Feature

The controllers in AEM’s Water Methanol systems include an integrated “BoostSafe” output feature that monitors the entire injection system and triggers aground signal via an output if it detects a voltage-related error (short, badconnection, broken wire, overheated pump, high or low voltage signal, etc.),allowing users to define their failsafe strategy from something as simple asflashing a warning light to more advanced strategies like pulling boost orignition, or switching fuel maps on a standalone engine management system.Combined with the integral and highly accurate conductive low-fluid switch inthe tank, “Boost Safe” can also put your engine in safe mode before the systemruns dry. This exclusive feature is found only on AEM Water/Methanol InjectionSystems.

Heavy-Duty High Pressure Injection Pump

AEM’s internally-bypassed water/methanol injection pump does not cycle on andoff and provides quiet, smooth operation. It features robust constructionincluding integral hose fittings, EPDM seals and a Santoprene diaphragm thatprovides consistent and reliable fluid delivery.

Low-Profile 1 Gallon Tank

AEM’s gas Water/Methanol Injection Systems are available with or without acompact 1 gallon tank. A more accurate, conductive low level fluid sensor is integratedinto the tank and features a positive lock connector with color-matched wiresto the wiring harness. The sensor eliminates any chance of incorrect readingsdue to interference from debris.

Machined Billet Injectors and Nozzles

AEM includes one precision-machined billet injector in its gasolineWater/Methanol Injection kit. It features an integral check valve to preventunintended fluid flow. Three billet injector nozzles are included for matchingwater/methanol flow to an engine’s horsepower output.

Revised Flow Control Strategy for More Linear Fluid Delivery

AEM’s engineers spent extensive time revamping the controller’s flow controlstrategy for a more linear flow output delivery. This means that the flowdelivery better matches an engine’s need for water/methanol injection, whichfurther optimizes charge air cooling and detonation control.

Boost Dependent and Multi-Input (0-5v/frequency) progressivecontroller designs feature large adjustment knobs, integrated plug for harnessconnection, integrated fuse, covered status light and test button for enhancedsplash resistance and mounting tabs

Wiring harness is terminated with a positive-lock connectoron one end with color-coded wires to ease installation, integrated pump groundcircuit and additional wire for optional on/off fluid solenoid

“Boost Safe” failsafe output included (for complete failsafeunder all conditions, see our Water/Methanol Failsafe Device)

Heavy-duty high-pressure injection pump features integralfittings, a Santoprene diaphragm and EPDM seals to resist corrosion. Our pumpmaximizes line pressure for optimum atomization and its quiet, smooth operationis almost undetectable

Precision-machined billet-aluminum injector with integralcheck valve

Three interchangeable injector nozzles to cover a widevariety of HP levels (250cc/min, 500 cc/min & 1,000cc/min)

1 gallon tank with integral conductive low-fluid sensor andpositive lock connector (tank-less systems available)

20 feet of injection tubing included

LED dash light for system status and low fluid warning

WATER/METHANOL INJECTION ADVANTAGES FOR GAS ENGINES:

Reduces Air Inlet Charge Temps
The term “liquid intercooling” with water/methanol injection refers to a highlyatomized mist of water/methanol that is injected into the airstream and beginsto evaporate. As it does, this evaporative effect reduces air charge temps byas much as 100 degrees, and delivers a more oxygen-rich air charge.

Reduces Detonation (Knock)
Water absorbs heat, and methanol is a cool burning, anti-knock rated fuel. Whencombined and introduced into the inlet stream, they can effectively increaseyour vehicle’s anti-knock index so you can reliably increase boost pressure andadvance ignition timing using pump gas.

Reduces Carbon Deposits
Modern vehicles fitted with Exhaust Gas Recirculation (EGR) devices foremissions control promote heavy carbon build up inside the air intake. Thiscarbon build-up can create ‘hot spots’ in the combustion chambers that cancause detonation. Water/methanol injection has a ‘steam cleaning’ effect thatreduces this carbon build up, and in some cases can increase fuel economy.


Ask us about saving money with ourPACKAGE DEALSCP Cometic ACL Ferrea and ARP KitsCustom Made Package DealsAEM Package DealsPackage DealsAsk us about combining purchases for package deal and Main Studs
  • and more...
  • Shipping
    • We ship via UPS/USPS/FEDEX/ONTRAC ground depending on the address of buyer unless instructed to do differently.
    • We also offer expedited shipping at an extra cost.
    • International shipping rate applies to addresses in all other locations
    • Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer.
    • Item ships within one business day after the payment has cleared or same day if paid by12pm PSTunless additional handling stated.Item purchased is shipped from West or East Coast Warehouses of ours depending on availability.
    • There\'s a shipping surcharge for shipments going to USPS PO Boxes, AF/APO boxes andany address that is out of 48 lower states. Please contact prior to get a shipping quote.
    • We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information.
    • Promotional Shipping is only good for shipments going to 48 lower states only.
    • We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers.
    • Shipping charges are non-refundable.
    • We will gladly combine shipping charges to one charged based on the total weight of the package. B

    Payment
    • We require that all payments be paid through PayPal. Your address must be confirmed. Buyers who pay with unconfirmed addresses will not be accepted.
    • International Buyers, please contact us before offerding to discuss the shipping cost.
    • We always look to satisfy our customers in whatever needs they may have. If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through as soon as possible. Please contact us if you have any questions..

    If you have any issue with your transaction, before filing any dispute, please contact us to resolve and we will do our best to resolve the issue through as soon as possible. Please contact us if you have any questions.


    Buy Now



    Search for a different part:


    Related Cars:



    2002 Holden Commodore SS
    2002 Holden Commodore SS

    2010 Ford Taurus SHO
    2010 Ford Taurus SHO

    2008 Brabus Bullit Black Arrow
    2008 Brabus Bullit Black Arrow

    2006 Dodge Charger RT
    2006 Dodge Charger RT

    2006 Citroen C-Metisse Concept
    2006 Citroen C-Metisse Concept

    1996 Ford SVT Mustang Mystic Cobra
    1996 Ford SVT Mustang Mystic Cobra

    2010 Fisker Karma
    2010 Fisker Karma

    2009 Mansory LINEA Vincero
    2009 Mansory LINEA Vincero

    2000 Ruf RGT
    2000 Ruf RGT

    2003 Holden Monaro Series II CV8
    2003 Holden Monaro Series II CV8

    Related Items:

    AEM V3 Water / Methanol Multi Input Injection Kit w/ 1.15 Gallon Tank 30-3350  picture

    AEM V3 Water / Methanol Multi Input Injection Kit w/ 1.15 Gallon Tank 30-3350

    $481.95



    AEM V3 Water Methanol Injection Kit 1.15 Gallon Tank w/ Fluid MAP Sensor 30-3300 picture

    AEM V3 Water Methanol Injection Kit 1.15 Gallon Tank w/ Fluid MAP Sensor 30-3300

    $512.95



    AEM V3 5 Gallon Diesel Water/Methanol Injection Kit - Multi Input 30-3351 picture

    AEM V3 5 Gallon Diesel Water/Methanol Injection Kit - Multi Input 30-3351

    $614.95




    Contact | Copyright Information | Privacy Policy & Terms of Use