Welcometo Partsbetter Description Key Features:
1.100% Brand New OEM
2. PERFORMANCE Spark Plug Wires Set CHEVY/GMC 1999-2006 LS1 VORTEC 4.8L 5.3L 6.0L
3. 8mm Spiral Wound Design
4. UltraLow Resistance KEVLAR Core
5. RFI Suppression
6. Ultra High Strength/High Temp. Silicone Boots and Sleeve
7. Ready for Install Straight out of the box
Reference Number:
483227831, M8-48322
Compatible Models and Years:
- for 2004 Buick Rainer 5.3L
- for 2002-2004 Cadillac Escalade 6.0L
- for 1999-2006 Chevy C,K 1500 Silverado Gen III LS1 Vortec Trailbazer - 4.8L
- for 1999-2006 Chevy C,K 1500 Silverado 4.8L
- for 1999-2006 Chevy SSR 4.8L
- for 1999-2006 Chevy C,K 1500-2500 Silverado, Ssr Gen III LS1 Vortec 5.3L
- for 1999-2006 Chevy Suburban, Tahoe Gen III LS1 Vortec 5.3L
- for 1999-2006 Chevy C, K 2500 Silverado Gen III LS1 Vortec 6.0L
- for 1999-2006 Chevy Suburban, Tahoe Gen III LS1 Vortec 6.0L
- for 1999-2006 GMC C, K 1500 Sierra Gen III LS1 Vortec, Envoy 4.8L
- for 1999-2006 GMC C, K 1500 Sierra Gen III LS1 Vortec 5.3L
- for 1999-2006 GMC Yukon, Denali Gen III LS1 Vortec 5.3L
- for 1999-2006 GMC C, K 2500 Sierra, Yukon Gen III LS1 Vortec 6.0L
Installation:
（Take "2005 PT Cruiser 2.4L" as an example）
Step 1 :Remove the six 8mm upper manifold retaining bolts.
Step 2 :Loosen the air intake clamp at the throttle body.
Step 3 :Lift the upper intake manifold and retain out of the way using a bungee cord.
Step 4 :Remove old plug wire.
Step 5 :Using cotton swab, apply a very small amount of dielectric grease to the boot interior at each end (just the boot - not the terminal).
Step 6 :Reinstall new plug wire.
Step 7 :Repeat for each cylinder until done.
Step 8 :Lower intake manifold back in place and tighten to spec from interior bolts to the outside (no new gaskets required).
Step 9 :Tighten clamp at air intake to throttle body.
Parcel Content:
- 1 x Electronic Ignition HEI Spark Plug Wire Set (8 Wire Set)
