4x Front Rear Wheel Hub Bearing Assembly For Ford Explorer 2011-18 3.5L 512460 For Sale - New and Used

Item Description:

Item Features

• Condition:New
• Placement on Vehicle：Driver Side or Passenger SideFRONT and REAR
• Material:steel
• Fitment type:Direct replacement
• Warranty:1 Year
• Fits 5Lug

Vehicle Fitment

• For Ford Explorer 2011-2018 All Models
• For Ford Police Interceptor Utility 2013-2018 All Models

Item Include

• 4xwheel hub bearing

When do you need to replace

4x Front Rear Wheel Hub Bearing Assembly For Ford Explorer 2011-18 3.5L 512460

Item Description:

Item Features

• Condition:New
• Placement on Vehicle：Driver Side or Passenger SideFRONT and REAR
• Material:steel
• Fitment type:Direct replacement
• Warranty:1 Year
• Fits 5Lug

Vehicle Fitment

• For Ford Explorer 2011-2018 All Models
• For Ford Police Interceptor Utility 2013-2018 All Models

Item Include

• 4xwheel hub bearing

When do you need to replace

• Poor Clicking, snapping or popping
• Clunking or knocking
• Rumbling, humming or growling
• Wobble and/or wheel vibrations
• Shimmy, shudder, or vibration at constant speeds
• Abnormal side pulling when applying brakes
• Uneven or abnormal tire wear
• ABS failure

How to Install

• 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
• 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
• 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
• 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
• 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
• 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug.
• 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
• 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket.
• 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper.
• 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts.
• 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
• 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
• 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque
• If you have any question about the product, please contact us before buying, we will give you a best reply in time.
• We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or response, we will give you the best
  Item SpecificsBrand autosuperstarManufacturer Part Number 10175960Placement on Vehicle Front,RearOE/OEM Part Number 512460-4KType Wheel Hub & Bearing AssemblyVintage Car Part NoCondition NewBolt Circle Diameter 114.3mmBrake Pilot Diameter 67.9mmFlange Offset 42.8mmItems Included 4pcs wheel hub bearingManufacturer Warranty 1 YearMaterial SteelPerformance Part NoUniversal Fitment NoWheel Pilot Diameter 63.2mmFlange Diameter 145.6mmHub Pilot Diameter 92mmSuface Polished, Rust ProtectedWheel Stud Quantity 5
  Payment

  1.90% packages willbeshippedwithin24 located in CA or NJ or GA (ItemstobeReturnedmustbein brand wewillofferyourefundorreplacement after if order by Us

  Ifthere's anyquestionor problem, docontactus please. Our Customer Servicersare always here to answer the question and solve the problem.

  Note itfitsyourvehicle.
  If there's any question about the conpatibilities, contact us please.
  DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Excellent Delivery
  Shop CategoryStore Home Towing Mirrors 2 pcs Wheel Spacers Wheel Hub Bearing Heater Core 4 pcs Wheel Spacers Door Handle Windshield Wiper Motor Fuel Pump Air Parking Heater Window Regulator Throttle Body Window Switch AC Compressor ABS Wheel Speed Sensor Roof Rack Window Visor AC Condenser Bumper 4 pcs Wheel hub Bearing Tonneau Cover Sun Visor A/C Evaporator Core Spoiler Wing Headlights Assembly Fuel Injector Dash Cover Oil Pan Fender Flares Center Console Timing Belt Kit Timing Chain Kit Door Lock Actuator Electric Winch Tow Detonation Knock Sensor Horn OtherHot Item 4 pcs1.5\" 8x6.5 to 8x180 8 Lug Wheel Spacers Adapter For CHEVY For GMC USD 103.83 2 PCS Door Handle Black Inside Left & Right Side For Chevrolet C1500 PICKUP USD 23.99 Door Handle Inside Interior Driver Left LH For Chevy C1500 Truck Suburban K2500 USD 11.96 Front Window Switch Bezel For Chevy Silverado GMC Sierra 1500 2500 3500 2004-06 USD 18.39 1 pc Inside Interior Door Handle RH Right Passenger Side For Ford F-150 2009-14 USD 12.59 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout UsNew List Item Pair Power Door Lock Actuators Left & Right For Honda Acura 746-3011 USD 20.99 Window Regulator & Door Lock Actuator Front Right For Honda Accord 3.0L USD 43.99 2 X Power Door Lock Actuators Front & Rear Right For 2003-2008 Honda Pilot USD 15.99 2 X Door Lock Actuators Front Driver Passenger For Toyota Avalon Solara Tundra USD 24.99 4 PCS Door Lock Actuators Motor Front & Rear For 2003-2007 Honda Pilot USD 29.99 4x Front Rear Wheel Hub Bearing Assembly For Ford Explorer 2011-18 3.5L 512460

  Item Description:

  Item Features

  • Condition:New
  • Placement on Vehicle：Driver Side or Passenger SideFRONT and REAR
  • Material:steel
  • Fitment type:Direct replacement
  • Warranty:1 Year
  • Fits 5Lug

  Vehicle Fitment

  • For Ford Explorer 2011-2018 All Models
  • For Ford Police Interceptor Utility 2013-2018 All Models

  Item Include

  • 4xwheel hub bearing

  When do you need to replace

  • Poor Clicking, snapping or popping
  • Clunking or knocking
  • Rumbling, humming or growling
  • Wobble and/or wheel vibrations
  • Shimmy, shudder, or vibration at constant speeds
  • Abnormal side pulling when applying brakes
  • Uneven or abnormal tire wear
  • ABS failure

  How to Install

  • 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
  • 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
  • 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
  • 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
  • 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
  • 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug.
  • 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
  • 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket.
  • 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper.
  • 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts.
  • 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
  • 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
  • 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque
  • If you have any question about the product, please contact us before buying, we will give you a best reply in time.
  • We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or response, we will give you the best
    
    PaymentShippingPolicyContact UsNote

    1.90% packages willbeshippedwithin24 located in CA or NJ or GA (ItemstobeReturnedmustbein brand wewillofferyourefundorreplacement after if order by

    Ifthere's anyquestionor problem, docontactus please. Our Customer Servicersare always here to answer the question and solve the problem.

    itfitsyourvehicle.
    If there's any question about the conpatibilities, contact us please.
    
    

    All rights reserved.

    
    
    
    

    ---