Features:
※ Latest COB chip (USA) light source,/360 degree no blind zone
※ Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
※ Xenon white light reflect road paint/signs better to show clearer road situation during night driving
※ 270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
※ All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature
※ Built-in constant current CPU, instant full brightness without start-up relaySpecifications:
※ Bulb Socket: 9005 High Beam + 9006 Low beam
※ light Source Model: 2pcs COB Chips
※ Power: 40W per bulb
※ Lumen: 5000LM per set
※ Operating voltage: DC9-32V
※ Beam Type: High beam & Low beam
※ Material: Aluminum PCB and PA66+30% GF Plastic
※ Beam Angle: 360°
※ Color Temperature: 6000K Cool White
※ Working Temperature: -40-+105 Centigrade
※ Connector Type:Plug and Play
※ Application :LED Headlights Headlamp Lamp Bulbs High or Low Beam
※ Color Temperature: Pure White 6000K
※ IP68 rated water and dust seal, over 50000hrs lifetime
※ Usage: headlightApplication: used for replacing the headlight
Voltage: 12V~24V, built in IC driver,much stable current than normal led bulbs in the marker, longer life span.
Please Note: Please check your car manual or original bulb to confirm the bulb size, length is correc or not before purchasing to save your time. Directly plug and play, easy installation.
Package Include:
※ 2x 9005 LED high beam bulbs
※ 2x 9006 LED low beam bulbs
Well Packaged in Retail Box, new and old packaging will be shipped randomly.Install Caution:
※ As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
※ Put the vehicle into park or make sure it is securely in gear.
※ Make sure to have the ignition turned off and the keys removed.
※ Be careful to avoid burns, especially when turning on or off the vehicles lighting.
※ Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
※ Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
※ Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
