2Pcs Wheel Hub Bearings Front For 2006 2007 2008 2009 2010 Hummer H3 with ABS For Sale - New and Used

Product Features:

• Fits LH (Driver Side) & RH (Passenger Side)Front
• Fits 6 LugsWheels
• Wheel studs already installed
• ABS Type: Sensor-Wire
• Flange Type: 3-Bolt Triangular

Item Description:

• Brand New Wheel Hub Assembly
• Direct replacement
• Built to strict quality control standards
• Replaces dealer part numbers: 515093, 15874836, 15870575, 15834245, 15834244, 15821079, 15111599, 102198, BHA54103, 106093, H515093, SP550311, BR930744, WA515093, AX15093, 730-0351, 1411-258521, WE61575

Vehicle Fitment:

2Pcs Wheel Hub Bearings Front For 2006 2007 2008 2009 2010 Hummer H3 with ABS

Product Features:

• Fits LH (Driver Side) & RH (Passenger Side)Front
• Fits 6 LugsWheels
• Wheel studs already installed
• ABS Type: Sensor-Wire
• Flange Type: 3-Bolt Triangular

Item Description:

• Brand New Wheel Hub Assembly
• Direct replacement
• Built to strict quality control standards
• Replaces dealer part numbers: 515093, 15874836, 15870575, 15834245, 15834244, 15821079, 15111599, 102198, BHA54103, 106093, H515093, SP550311, BR930744, WA515093, AX15093, 730-0351, 1411-258521, WE61575

Vehicle Fitment:

• Fits Hummer H3 2006-2010
• Fits Hummer H3T Include:
  • (2) Wheel Hub Bearings

  Exploded View:

  1. Wheel hub and bearing
  2. Cotter pin
  3. Nut retainer
  4. Wheel hub lock nut
  5. Hub bolt
  6. Splash guard
  7. Steering
  8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
  9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
  10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
  11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
  12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
  13. Remove the engine side cover.
  14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
  15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
  16. Remove the wheel hub and bearing bolts using power tool.
  17. Remove the splash guard and the wheel hub and bearing from the steering
  18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
  19. Pull out the front wheel sensor, being careful to turn it as little as possible.
  20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
  21. Do not reuse the wheel stud.
  22. Do not reuse the cotter pin.
  23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
  24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
  25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

  6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

  7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

  8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

  9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

  
  Item SpecificsBrand ECCPPManufacturer Part Number ECP802899HKABS Sensor Has ABS with tegral SensorPlacement on Vehicle FrontMaterial SteelFinish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 515093Quantity 2Fitment 2006 2007 2008 2009 2010 Hummer H3; 2009 2010 Hummer H3TDrive Type 4WDInterchange Part Number 15874836, 15870575, BR930744, 730-0351, 1411-258521, WE61575Anti-lock Braking System YesBolt Pattern 6 x 5.5 in (6 x 139.7 mm)Spline Quantity 33Bolt Circle Diameter 5.5 in. / 139.7 mmBrake Pilot Diameter 3.96 in. / 100.58 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.96 in. / 126 mmFlange Bolt Size M14x1.5Flange Bolts Included NoFlange Diameter 7.02 in. / 178.3 mmFlange Offset 1.96 in. / 49.78 mmFlange Shape TriangleHub Pilot Diameter 3.91 in. / 99.3 mmWheel Pilot Diameter 3.94 in. / 100 mmWheel Stud Quantity 6Wheel Stud Size M12x1.5Wheel Studs Included YesBearing Type Tapered Bearing Item SpecificsBrand ECCPPManufacturer Part Number ECP802899HKABS Sensor Has ABS with tegral SensorPlacement on Vehicle FrontMaterial SteelFinish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 515093Quantity 2Fitment 2006 2007 2008 2009 2010 Hummer H3; 2009 2010 Hummer H3TDrive Type 4WDInterchange Part Number 15874836, 15870575, BR930744, 730-0351, 1411-258521, WE61575Anti-lock Braking System YesBolt Pattern 6 x 5.5 in (6 x 139.7 mm)Spline Quantity 33Bolt Circle Diameter 5.5 in. / 139.7 mmBrake Pilot Diameter 3.96 in. / 100.58 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.96 in. / 126 mmFlange Bolt Size M14x1.5Flange Bolts Included NoFlange Diameter 7.02 in. / 178.3 mmFlange Offset 1.96 in. / 49.78 mmFlange Shape TriangleHub Pilot Diameter 3.91 in. / 99.3 mmWheel Pilot Diameter 3.94 in. / 100 mmWheel Stud Quantity 6Wheel Stud Size M12x1.5Wheel Studs Included YesBearing Type Tapered Bearing
  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
  • PayPalpreferred.
  Picture
  Hot Item ECCPP 2 Pcs Wheel Hub Bearing Front For Buick LaCrosse Century Regal Lesabre FWD USD 66.98 Pair Manual Adjust Tow Mirrors For 1988-1998 Chevy GMC C K 1500/2500/3500 USD 62.99 Universal 12V Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S USD 14.15 Pair For 2007-2014 Chevy Silverado Sierra Towing Power Heated LED Signal Mirrors USD 124.69 Front Wheel Hub Bearing For Chevy Monte Carlo Impala Cadillac Eldorado DTS FWD USD 44.37 Shop CategoryStore Home Air Dryer Car Tools◈Car Tools◈Electric Winch Tow◈Jack Stand◈Jumper Cable◈Removal Tool◈Tire Pressure Gauge Clutch System◈Clutch Slave Cylinder Cooling System◈AC Compressor◈Air Blend Door Actuator◈Blower Motor Resistor◈Condenser◈Coolant Tank◈Cooling Fan◈Evaporator◈Heater Control Valve◈Heater Hose◈Radiator Support◈Thermostat Housing◈Water Pump◈Water Pump Impeller Copper Tube◈ATV Brake Caliper◈ATV Brake Master Cylinder◈Brake caliper◈Brake drum shoe◈Brake lines kit◈Brake rotor pad◈Brake Shoe◈Clutch Lever◈Power Brake Booster Crankshaft And Camshaft◈Camshaft & Crankshaft◈Harmonic Banlancer◈Timing Chain Kit Drive Belt And Device◈Primary Drive Clutch◈Serpentine Belt Tensioner◈Wear Ring Drive Shaft And Half Shaft◈4 Pcs Wheel Hub Bearing◈C Notch & Flip Kit◈CV Axle◈CV Axle Boot◈Driveshaft◈Rear Wheel Axle◈Wheel Hub Bearing◈Wheel Hub Bearing Knuckle◈Wheel Hub Centric Rings◈Wheel Spacers Engine Bracket Glue◈Engine Mount Engine Gasket & Cylinder Head◈Carbon Seal◈Cylinder Head◈Cylinder Piston Gasket Kit◈Head Gasket Set Fuel System◈Car Carburetor◈Fuel Injectors◈Fuel Pump Assembly◈Fuel Tank Pipe & Cap◈Fuel Tank Valve & Regulator◈Mass Air Flow Sensor◈Motorcycle Carburetor & Parts◈Oil Fuel Hose◈Purge Valve◈Vacuum Pump Gas Distribution System◈Diesel Emissions Fluid Pump◈Hydraulic Lifter & Rocker Arms◈Idle Air Control Valve◈Intake Carburetor Boot◈Secondary Air Pump◈Throttle Body◈Turbocharger◈Valve Cover Golf Series Home gardening◈Courtyard And Outdoor Supplies Ignition System◈ATV Ignition Coil◈Fuse Box◈Glow Plugs◈Ignition Coil & Spark Plug◈Ignition Coils◈Ignition Distributor◈Spark Plug Wire Set◈Wiring Harness Inner Parts◈Air Cleaner Box Assembly◈Car Floor Mats◈Car Seat Cover◈Cargo Cover◈Center Console◈Dash Cover & Cushion◈Fastener◈Remote Key◈Shift Knob Lever Head◈Steering Wheel & Adapter◈Sun Visor Lawn Mower Parts Light products◈Exterior Lights◈Fog Light◈Headlight Assembly◈Instrument Panel Lights◈Interior Lights◈Led Headlights◈Motorcycle Light◈Side/Cab Marker Lights◈Special Model Lights◈Third Brake Lights Lubrication System◈Dipstick◈Engine Oil Cooler◈Oil Pan◈Oil Pump Other Parts◈Shackle Kit◈Wheel Lug NutsNew List Item Front Ceramic Brake Pads And Rotors For Infiniti I35 Nissan Altima Nissan Maxima USD 85.38 Front Ceramic Brake Pads And Rotors For 07 08 09 10 11-17 Jeep Wrangler USD 89.99 Rear Ceramic Brake Pads And Rotors For Infiniti FX35 M56 Nissan Pathfinder USD 79.77 Front Brake Pads And Rotors For 2013-2019 Cadillac XTS 07-13 Chevrolet Avalanche USD 127.19 Front Discs Brake Rotors and Ceramic Pads For Toyota 4Runner 1996-2002 Drilled USD 84.03 2Pcs Wheel Hub Bearings Front For 2006 2007 2008 2009 2010 Hummer H3 with ABS

  Product Features:

  • Fits LH (Driver Side) & RH (Passenger Side)Front
  • Fits 6 LugsWheels
  • Wheel studs already installed
  • ABS Type: Sensor-Wire
  • Flange Type: 3-Bolt Triangular

  Item Description:

  • Brand New Wheel Hub Assembly
  • Direct replacement
  • Built to strict quality control standards
  • Replaces dealer part numbers: 515093, 15874836, 15870575, 15834245, 15834244, 15821079, 15111599, 102198, BHA54103, 106093, H515093, SP550311, BR930744, WA515093, AX15093, 730-0351, 1411-258521, WE61575

  Vehicle Fitment:

  • Fits Hummer H3 2006-2010
  • Fits Hummer H3T Include:
    • (2) Wheel Hub Bearings

    Exploded View:

    1. Wheel hub and bearing
    2. Cotter pin
    3. Nut retainer
    4. Wheel hub lock nut
    5. Hub bolt
    6. Splash guard
    7. Steering
    8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    13. Remove the engine side cover.
    14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
    15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    16. Remove the wheel hub and bearing bolts using power tool.
    17. Remove the splash guard and the wheel hub and bearing from the steering
    18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    19. Pull out the front wheel sensor, being careful to turn it as little as possible.
    20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
    21. Do not reuse the wheel stud.
    22. Do not reuse the cotter pin.
    23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

    6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

    7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

    8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

    9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

    Item SpecificsBrand :ECCPPManufacturer Part Number :ECP802899HKABS Sensor :Has ABS with tegral SensorPlacement on Vehicle :FrontMaterial :SteelFinish :Polished, Rust ProtectedType :Wheel Hub & Bearing AssemblyOE/OEM Part Number :515093Quantity :2Fitment :2006 2007 2008 2009 2010 Hummer H3; 2009 2010 Hummer H3TDrive Type :4WDInterchange Part Number :15874836, 15870575, BR930744, 730-0351, 1411-258521, WE61575Anti-lock Braking System :YesBolt Pattern :6 x 5.5 in (6 x 139.7 mm)Spline Quantity :33Bolt Circle Diameter :5.5 in. / 139.7 mmBrake Pilot Diameter :3.96 in. / 100.58 mmFlange Bolt Hole Quantity :3Knuckle Bolt Circle Diameter :4.96 in. / 126 mmFlange Bolt Size :M14x1.5Flange Bolts Included :NoFlange Diameter :7.02 in. / 178.3 mmFlange Offset :1.96 in. / 49.78 mmFlange Shape :TriangleHub Pilot Diameter :3.91 in. / 99.3 mmWheel Pilot Diameter :3.94 in. / 100 mmWheel Stud Quantity :6Wheel Stud Size :M12x1.5Wheel Studs Included :YesBearing Type :Tapered Bearing Item SpecificsBrand ECCPPManufacturer Part Number ECP802899HKABS Sensor Has ABS with tegral SensorPlacement on Vehicle FrontMaterial SteelFinish Polished, Rust ProtectedType Wheel Hub & Bearing AssemblyOE/OEM Part Number 515093Quantity 2Fitment 2006 2007 2008 2009 2010 Hummer H3; 2009 2010 Hummer H3TDrive Type 4WDInterchange Part Number 15874836, 15870575, BR930744, 730-0351, 1411-258521, WE61575Anti-lock Braking System YesBolt Pattern 6 x 5.5 in (6 x 139.7 mm)Spline Quantity 33Bolt Circle Diameter 5.5 in. / 139.7 mmBrake Pilot Diameter 3.96 in. / 100.58 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.96 in. / 126 mmFlange Bolt Size M14x1.5Flange Bolts Included NoFlange Diameter 7.02 in. / 178.3 mmFlange Offset 1.96 in. / 49.78 mmFlange Shape TriangleHub Pilot Diameter 3.91 in. / 99.3 mmWheel Pilot Diameter 3.94 in. / 100 mmWheel Stud Quantity 6Wheel Stud Size M12x1.5Wheel Studs Included YesBearing Type Tapered Bearing
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    • PayPalpreferred.

    ​

    ​

    
    

    Copyright of eccppautoparts. All rights reserved.

    
    
    
    

    ---