Specifications :- Fits both LH (Driver Side) & RH (Passenger Side)- Has ABS sensor w/stainless steel sensor & plastic wire clips- Direct fit, designed for vehicle specific application on all makes and models- Latest generation design used in manufacturing our hub assemblies- High quality seal design ensures a clean, long lasting hub bearing- Sensors designed to match specific make and model- Precision machined and pre-coated with anti-corrosion lubricant- Manufactured for quick and easy installationFor the following years and models: Premium
Best choice of motor parts
2 X Wheel Hub Bearing Assembly Front For Nissan Altima 2007 2008-2013 2.5L 5 Lug
Specifications :
- Fits both LH (Driver Side) & RH (Passenger Side)
- Has ABS sensor w/stainless steel sensor & plastic wire clips
- Direct fit, designed for vehicle specific application on all makes and models
- Latest generation design used in manufacturing our hub assemblies
- High quality seal design ensures a clean, long lasting hub bearing
- Sensors designed to match specific make and model
- Precision machined and pre-coated with anti-corrosion lubricant
- Manufactured for quick and easy installation
For the following years and models:
- Fits Nissan Altima 2007 2.5L 4 Wheel Abs
- Fits Nissan Altima 2008-20122.5L 4Cyl Engines Only
- Fits Nissan Altima 2013 2.5L 4Cyl S Coupe?
1 Year Warranty
How to Install a Wheel Bearing Hub Assembly :
1. Park the vehicle on a flat, level paved or concrete surface. Place the vehicle in gear or park and apply the parking brake.
2. Place a wheel chock behind a Front tire (or front if you're doing a Front hub-bearing assembly).
3. Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket; do not remove them.
4. Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand, preferably on the frame rail if present.
5. Remove the lug nuts and wheel.
6. Locate the caliper bolts and remove them with the ratchet and a socket.
7. Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord. Do not allow the caliper to dangle on the rubber brake hose.
8. Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket. You may want to break them loose with the breaking bar first if they're really tight. On some vehicles, the brake pads will remain in the bridge and can be removed by prying out with the screwdriver. On other models, the pads stay intact and may be clipped to the caliper. If you have to remove the pads, do so by taking note how they were placed in the bridge and be sure you're able to put them back in the same manner they were extracted.
9. Remove the rotor. If it is stuck to the hub, you may have to hit it with a large rubber mallet. Use a rubber mallet if you're not going to replace the rotor, so you don't damage the surface.
10. Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. In many applications, if the ABS wire is integrated with the wheel-bearing hub assembly, a new one will come with it. If you're not sure, check the box of the new bearing and if there's an ABS wire, follow the wire until you locate the plug, unplug it and unclip it from its mounts. If ABS is present but not integrated with the bearing assembly, remove the sensor from the bearing with a ratchet and socket.
11. Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
12. Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. The location of these can sometimes create a tight area to place a socket and tool on to remove them with. You may have to apply some ingenuity. Replace the socket on the ratchet to extract the bolts quickly and easier. Most hubs have three or four bolts.
13. Install the slide hammer onto the lug studs and secure with tightened lug nuts. This may take several attempts and a couple of breaks in between to remove the hub bearing from the knuckle. Pay close attention to your progress and try to determine when the bearing will separate. Take note of how the backing plate is installed between the knuckle and the bearing so you can replace it in the same manner.
14. Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. Move the drive-shaft spindle around to get it out of your way. Take your time when doing this and make sure it's as clean as possible.
15. Place the backing plate in its original position and place the new bearing onto the knuckle. Manipulate the drive-shaft spindle splines into the center of the hub bearing. Push the bearing on as far as you can, making sure to line it up correctly if ABS lines or plugs are present.
16. Replace the wheel-bearing assembly bolts. They're pretty long, so as soon as you can thread them into the new bearing, start to tighten them. Pull the bearing in by tightening the bolts a little bit at a time and then switching to the next bolt to make sure the bearing assembly does not shift in the knuckle and cause damage. Once the bearing is drawn in flush, use the breaking bar to get the bolts as tight as you can get them.
17. Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
18. Replace the brakes in the same manner you extracted them. You may need to push the caliper piston in a bit with a C-clamp to get it over the rotor. Plug in the ABS lines or reattach them to the bearing, if applicable.
19. Replace the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
20. Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.
21. Pump the brake pedal if you had to push the caliper piston in with a C-clamp to restore hydraulic pressure to that caliper piston.
22. Remove the wheel chock, release the parking brake, and go for a test drive.
Item SpecificsBrand Preminumwheel spacerManufacturer Part Number PWS993802002Position on Vehicle Driver Side or Passenger Side FrontWarranty 12 monthsABS Sensor Yes（Has ABS with Tone Ring Sensor）Packing 2 Pcs wheel bearings & hubSpline Quantity 29Lug Quantity 5 LugsFlange Bolt Hole Quantity 4Flange Shape RectangleMaterial steelSurface Finish Polished, Rust ProtectedWeight 16LBBolt Circle Diameter 4.5In.Brake Pilot Diameter 2.68In.Flange Diameter 5.35In.Flange Offset 1.6In.Hub Pilot Diameter 3.66In.Wheel Pilot Diameter 2.6In.Interchange Part Number wheel bearings 513294Fitment Chart Fits NissanCross number 402029HC0A 40202JA000 40202JA010
Payment We accept paypal onlyWe only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!Shipping 1. Items will be shipped within 24 hours after getting your verified payment.2. 2.US Storage& UNITED STATES by fast shipping. We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors. Please feel free to contact us if you haven't receive the item after the estimated shipping timeReturns 1.Defective products can be exchanged or returned for full price refund within 30 days after you receive the item.2.Any returning or exchanging item must be in new condition and cannot be tempered.3. Buyers are responsible to pay the return shipping fee or exchange shipping fee.4.Please contact us by email first before you return the item Every week we have new items put on sale , if the items you don't need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need.Contact Us
We hightly appreciate that you can refer to us or email us before you leaving Negative response or Neutral response .We will offer help to resolve your problems as fast as possible.
Premium
Best choice of motor parts
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US 2 X Wheel Hub Bearing Assembly Front For Nissan Altima 2007 2008-2013 2.5L 5 Lug
Specifications :
- Fits both LH (Driver Side) & RH (Passenger Side)
- Has ABS sensor w/stainless steel sensor & plastic wire clips
- Direct fit, designed for vehicle specific application on all makes and models
- Latest generation design used in manufacturing our hub assemblies
- High quality seal design ensures a clean, long lasting hub bearing
- Sensors designed to match specific make and model
- Precision machined and pre-coated with anti-corrosion lubricant
- Manufactured for quick and easy installation
For the following years and models:
- Fits Nissan Altima 2007 2.5L 4 Wheel Abs
- Fits Nissan Altima 2008-20122.5L 4Cyl Engines Only
- Fits Nissan Altima 2013 2.5L 4Cyl S Coupe?
1 Year Warranty
How to Install a Wheel Bearing Hub Assembly :
1. Park the vehicle on a flat, level paved or concrete surface. Place the vehicle in gear or park and apply the parking brake.
2. Place a wheel chock behind a Front tire (or front if you're doing a Front hub-bearing assembly).
3. Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket; do not remove them.
4. Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand, preferably on the frame rail if present.
5. Remove the lug nuts and wheel.
6. Locate the caliper bolts and remove them with the ratchet and a socket.
7. Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord. Do not allow the caliper to dangle on the rubber brake hose.
8. Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket. You may want to break them loose with the breaking bar first if they're really tight. On some vehicles, the brake pads will remain in the bridge and can be removed by prying out with the screwdriver. On other models, the pads stay intact and may be clipped to the caliper. If you have to remove the pads, do so by taking note how they were placed in the bridge and be sure you're able to put them back in the same manner they were extracted.
9. Remove the rotor. If it is stuck to the hub, you may have to hit it with a large rubber mallet. Use a rubber mallet if you're not going to replace the rotor, so you don't damage the surface.
10. Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug. In many applications, if the ABS wire is integrated with the wheel-bearing hub assembly, a new one will come with it. If you're not sure, check the box of the new bearing and if there's an ABS wire, follow the wire until you locate the plug, unplug it and unclip it from its mounts. If ABS is present but not integrated with the bearing assembly, remove the sensor from the bearing with a ratchet and socket.
11. Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
12. Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket. The location of these can sometimes create a tight area to place a socket and tool on to remove them with. You may have to apply some ingenuity. Replace the socket on the ratchet to extract the bolts quickly and easier. Most hubs have three or four bolts.
13. Install the slide hammer onto the lug studs and secure with tightened lug nuts. This may take several attempts and a couple of breaks in between to remove the hub bearing from the knuckle. Pay close attention to your progress and try to determine when the bearing will separate. Take note of how the backing plate is installed between the knuckle and the bearing so you can replace it in the same manner.
14. Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper. Move the drive-shaft spindle around to get it out of your way. Take your time when doing this and make sure it's as clean as possible.
15. Place the backing plate in its original position and place the new bearing onto the knuckle. Manipulate the drive-shaft spindle splines into the center of the hub bearing. Push the bearing on as far as you can, making sure to line it up correctly if ABS lines or plugs are present.
16. Replace the wheel-bearing assembly bolts. They're pretty long, so as soon as you can thread them into the new bearing, start to tighten them. Pull the bearing in by tightening the bolts a little bit at a time and then switching to the next bolt to make sure the bearing assembly does not shift in the knuckle and cause damage. Once the bearing is drawn in flush, use the breaking bar to get the bolts as tight as you can get them.
17. Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
18. Replace the brakes in the same manner you extracted them. You may need to push the caliper piston in a bit with a C-clamp to get it over the rotor. Plug in the ABS lines or reattach them to the bearing, if applicable.
19. Replace the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
20. Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque setting.
21. Pump the brake pedal if you had to push the caliper piston in with a C-clamp to restore hydraulic pressure to that caliper piston.
22. Remove the wheel chock, release the parking brake, and go for a test drive.
Item SpecificsBrand :Preminumwheel spacerManufacturer Part Number :PWS993802002Position on Vehicle :Driver Side or Passenger Side FrontWarranty :12 monthsABS Sensor :Yes（Has ABS with Tone Ring Sensor）Packing :2 Pcs wheel bearings & hubSpline Quantity :29Lug Quantity :5 LugsFlange Bolt Hole Quantity :4Flange Shape :RectangleMaterial :steelSurface Finish :Polished, Rust ProtectedWeight :16LBBolt Circle Diameter :4.5In.Brake Pilot Diameter :2.68In.Flange Diameter :5.35In.Flange Offset :1.6In.Hub Pilot Diameter :3.66In.Wheel Pilot Diameter :2.6In.Interchange Part Number :wheel bearings 513294Fitment Chart :Fits NissanCross number : 402029HC0A 40202JA000 40202JA010
PaymentShippingReturnsContact Us We accept paypal onlyWe only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address! 1. Items will be shipped within 24 hours after getting your verified payment.2. 2.US Storage& UNITED STATES by fast shipping. We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors. Please feel free to contact us if you haven't receive the item after the estimated shipping time 1.Defective products can be exchanged or returned for full price refund within 30 days after you receive the item.2.Any returning or exchanging item must be in new condition and cannot be tempered.3. Buyers are responsible to pay the return shipping fee or exchange shipping fee.4.Please contact us by email first before you return the item Every week we have new items put on sale , if the items you don't need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need.
We hightly appreciate that you can refer to us or email us before you leaving Negative response or Neutral response .We will offer help to resolve your problems as fast as possible.
All rights reserved.
Shop CategoryStore Home wheel hub bearing wheel spacers ABS wheel speed sensor wheel lug nutHot Item Pair Fits Nissan Rogue 2008 2009 2010-2013 Front Wheel Bearings Hub Assembly USD 75.79 (2) Front Wheel Hub Bearing Assembly For 1994-99 Dodge Ram 1500 3.9/5.2/5.9L 4X4 USD 88.29 Fits Mini Cooper 2002-2006 4 Bolt hold Front Wheel Hub Bearing Assembly W/ABS USD 48.94 2 X Wheel Hub Bearing Assembly Front For Nissan Altima 2007 2008-2013 2.5L 5 Lug USD 71.02 Fits Chevrolet Malibu 2004-2007 Pontiac G6 05-2007 5 Lug Front Wheel Hub Bearing USD 46.90 Excellent Delivery
New List Item Front Wheel Hub & Bearing Driver Or Passenger Fits Chevrolet Cruze New 5 Lugs USD 46.50 Rear Complete Wheel Hub Bearing Assembly For Toyota Prius One Hatchback 4-Door USD 52.50 Set Of 2 Wheel Hub Bearing Assembly Fits 350Z G35 3.5L 2003 2004 2005-2007 W/ABS USD 69.50 Fits Infiniti G37 Ex35 Fx35 Fx37 Qx50 Qx70 AWD Front Bearing And Hub Assembly USD 44.50 2 Set Of Fits Dodge Grand Caravan 08-16 Ram C/V 12-15 Front Wheel Hub Bearing USD 86.50
