2 Pcs Wheel Hub Bearing Front For Chevy Silverado 1500 GMC Sierra 1500 Yukon 4WD For Sale - New and Used

Product Features:

• Fits LH (Driver Side) & RH (Passenger Side)Front
• Fits 6 LugsWheels
• Wheel studs already installed
• Includes ABS with tegral Sensor

Item Description:

• Brand New Wheel Hub Assembly
• Direct replacement
• Built to strict quality control standards
• Replaces dealer part numbers:515036,15863441, FW311, PT515036, 715036, 295-15036PL

Vehicle Fitment:

2 Pcs Wheel Hub Bearing Front For Chevy Silverado 1500 GMC Sierra 1500 Yukon 4WD

Product Features:

• Fits LH (Driver Side) & RH (Passenger Side)Front
• Fits 6 LugsWheels
• Wheel studs already installed
• Includes ABS with tegral Sensor

Item Description:

• Brand New Wheel Hub Assembly
• Direct replacement
• Built to strict quality control standards
• Replaces dealer part numbers:515036,15863441, FW311, PT515036, 715036, 295-15036PL

Vehicle Fitment:

• Note: AWD/ 4WD 6 Lug Models Only
• Fits Cadillac Escalade 2002-2006
• Fits Cadillac Escalade ESV 2003-2006
• Fits Cadillac Escalade EXT 2002-2006
• Fits Chevrolet Avalanche 1500 2002-2006
• Fits Chevrolet Express 1500 2003-2014
• Fits Chevrolet Express 2500 2003-2005
• Fits Chevrolet Silverado 1500 1999-2006
• Fits Chevrolet Suburban 1500 2000-2006
• Fits Chevrolet Tahoe 2000-2006 (2000 BASE-LS-LT 4.8L 5.3L Only)
• Fits GMC Savana 1500 2003-2014
• Fits GMC Savana 2500 2003-2005
• Fits GMC Sierra 1500 1999-2006
• Fits GMC Yukon 2000-2006 (2000 Excluding Denali)
• Fits GMC Yukon Xl 1500 Include:
  • (2) Wheel Hub Bearing

  Exploded View:

  1. Wheel hub and bearing
  2. Cotter pin
  3. Nut retainer
  4. Wheel hub lock nut
  5. Hub bolt
  6. Splash guard
  7. Steering
  8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
  9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
  10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
  11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
  12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
  13. Remove the engine side cover.
  14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
  15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
  16. Remove the wheel hub and bearing bolts using power tool.
  17. Remove the splash guard and the wheel hub and bearing from the steering
  18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
  19. Pull out the front wheel sensor, being careful to turn it as little as possible.
  20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
  21. Do not reuse the wheel stud.
  22. Do not reuse the cotter pin.
  23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
  24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
  25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

  6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

  7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

  8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

  9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

  
  Item SpecificsManufacturer Part Number ECP070657HKBrand ECCPPType Wheel Hub & Bearing AssemblyOE/OEM Part Number 515036Material SteelSurface Finish Polished, Rust ProtectedQuantity 2Fitment 1 Cadillac Escalade 2002-2006 ESV/ EXTFitment 2 Chevrolet Avalanche 1500 2002-2006; Suburban 1500 2000-2006Fitment 3 Chevrolet Express 1500 2003-2014; Express 2500 2003-2005Fitment 4 1999-2006 Chevrolet Silverado 1500; GMC Sierra 1500Fitment 5 2000-2006 Chevrolet Tahoe; GMC Yukon/ XLFitment 6 GMC Savana 1500 2003-2014; Savana 2500 2003-2005Note AWD/ 4WD 6 Lug Models OnlyBolt Pattern 6 x 5.5 in (6 x 139.7 mm)Interchange Part Number 10393163, 15102294, 15112382, 15134584, 15233113, 15740291Anti-lock Braking System YesABS Sensor YesBolt Circle Diameter 5.5 in. / 139.7 mmBrake Pilot Diameter 3.09 in. / 78.4 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.96 in. / 126 mmKnuckle Bolt Hole Size M14x1.5Flange Bolts Included NoFlange Diameter 7.09 in. / 180 mmFlange Offset 1.96 in. / 49.8 mmFlange Shape TriangleHub Pilot Diameter 3.91 in. / 99.3 mmInside Spline Quantity 33Wheel Pilot Diameter 3.07 in. / 77.9 mmWheel Stud Quantity 6Wheel Stud Size M14x1.5Wheel Studs Included YesBearing Type Tapered BearingBearing Generation G3 Item SpecificsManufacturer Part Number ECP070657HKBrand ECCPPType Wheel Hub & Bearing AssemblyOE/OEM Part Number 515036Material SteelSurface Finish Polished, Rust ProtectedQuantity 2Fitment 1 Cadillac Escalade 2002-2006 ESV/ EXTFitment 2 Chevrolet Avalanche 1500 2002-2006; Suburban 1500 2000-2006Fitment 3 Chevrolet Express 1500 2003-2014; Express 2500 2003-2005Fitment 4 1999-2006 Chevrolet Silverado 1500; GMC Sierra 1500Fitment 5 2000-2006 Chevrolet Tahoe; GMC Yukon/ XLFitment 6 GMC Savana 1500 2003-2014; Savana 2500 2003-2005Note AWD/ 4WD 6 Lug Models OnlyBolt Pattern 6 x 5.5 in (6 x 139.7 mm)Interchange Part Number 10393163, 15102294, 15112382, 15134584, 15233113, 15740291Anti-lock Braking System YesABS Sensor YesBolt Circle Diameter 5.5 in. / 139.7 mmBrake Pilot Diameter 3.09 in. / 78.4 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.96 in. / 126 mmKnuckle Bolt Hole Size M14x1.5Flange Bolts Included NoFlange Diameter 7.09 in. / 180 mmFlange Offset 1.96 in. / 49.8 mmFlange Shape TriangleHub Pilot Diameter 3.91 in. / 99.3 mmInside Spline Quantity 33Wheel Pilot Diameter 3.07 in. / 77.9 mmWheel Stud Quantity 6Wheel Stud Size M14x1.5Wheel Studs Included YesBearing Type Tapered BearingBearing Generation G3
  WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
  • PayPalpreferred.
  Picture
  Hot Item ECCPP 2 Pcs Wheel Hub Bearing Front For Buick LaCrosse Century Regal Lesabre FWD USD 60.95 Universal 12V Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S USD 14.15 Pair For 2007-2014 Chevy Silverado Sierra Towing Power Heated LED Signal Mirrors USD 124.69 Front Wheel Hub Bearing For Chevy Monte Carlo Impala Cadillac Eldorado DTS FWD USD 40.38 Pair Manual Adjust Tow Mirrors For 1988-1998 Chevy GMC C K 1500/2500/3500 USD 62.99 Shop CategoryStore Home Air Dryer Car Tools◈Car Tools◈Electric Winch Tow◈Jack Stand◈Jumper Cable◈Removal Tool◈Tire Pressure Gauge Clutch System◈Clutch Slave Cylinder Cooling System◈AC Compressor◈Air Blend Door Actuator◈Blower Motor Resistor◈Condenser◈Coolant Tank◈Cooling Fan◈Evaporator◈Heater Control Valve◈Heater Hose◈Radiator Support◈Thermostat Housing◈Water Pump◈Water Pump Impeller Copper Tube◈ATV Brake Caliper◈ATV Brake Master Cylinder◈Brake caliper◈Brake drum shoe◈Brake lines kit◈Brake rotor pad◈Brake Shoe◈Clutch Lever◈Power Brake Booster Crankshaft And Camshaft◈Camshaft & Crankshaft◈Harmonic Banlancer◈Timing Chain Kit Drive Belt And Device◈Primary Drive Clutch◈Serpentine Belt Tensioner◈Wear Ring Drive Shaft And Half Shaft◈4 Pcs Wheel Hub Bearing◈C Notch & Flip Kit◈CV Axle◈CV Axle Boot◈Driveshaft◈Rear Wheel Axle◈Wheel Hub Bearing◈Wheel Hub Bearing Knuckle◈Wheel Hub Centric Rings◈Wheel Spacers Engine Bracket Glue◈Engine Mount Engine Gasket & Cylinder Head◈Carbon Seal◈Cylinder Head◈Cylinder Piston Gasket Kit◈Head Gasket Set Fuel System◈Car Carburetor◈Fuel Cell Gas Tank◈Fuel Injectors◈Fuel Pump Assembly◈Fuel Tank Pipe & Cap◈Fuel Tank Valve & Regulator◈Mass Air Flow Sensor◈Motorcycle Carburetor & Parts◈Oil Fuel Hose◈Purge Valve◈Vacuum Pump Gas Distribution System◈Diesel Emissions Fluid Pump◈Hydraulic Lifter & Rocker Arms◈Idle Air Control Valve◈Intake Carburetor Boot◈Secondary Air Pump◈Throttle Body◈Turbocharger◈Valve Cover Golf Series Home gardening◈Courtyard And Outdoor Supplies Ignition System◈ATV Ignition Coil◈Fuse Box◈Glow Plugs◈Ignition Coil & Spark Plug◈Ignition Coils◈Ignition Distributor◈Spark Plug Wire Set◈Wiring Harness Inner Parts◈Air Cleaner Box Assembly◈Car Floor Mats◈Car Seat Cover◈Cargo Cover◈Center Console◈Dash Cover & Cushion◈Fastener◈Remote Key◈Shift Knob Lever Head◈Steering Wheel & Adapter◈Sun Visor Lawn Mower Parts Light products◈Exterior Lights◈Fog Light◈Headlight Assembly◈Instrument Panel Lights◈Interior Lights◈Led Headlights◈Motorcycle Light◈Side/Cab Marker Lights◈Special Model Lights◈Third Brake Lights Lubrication System◈Dipstick◈Engine Oil Cooler◈Oil Pan◈Oil Pump Other Parts◈Shackle Kit◈Wheel Lug NutsNew List Item ECCPP PDC Parking Assist Sensor for 2016-2021 Tesla Referral Model S X 2017-2021 Model 3 USD 18.88 ECCPP Engine Oil Pressure Switch Sender Sensor For Jeep Chrysler 56028807AA USD 19.15 ECCPP Air Intake Temperature Sensor 37880-PLC-004 For Accord Civic CR-V S2000 USD 10.69 ECCPP Transmission Fluid Change Filter Service Gasket For 4Wd 45RFE 545RFE 68RFE USD 35.52 ECCPP 12594942 Manifold Pressure Sensor MAP For 2009-2013 GMC Yukon XL 1500 2500 USD 13.97 2 Pcs Wheel Hub Bearing Front For Chevy Silverado 1500 GMC Sierra 1500 Yukon 4WD

  Product Features:

  • Fits LH (Driver Side) & RH (Passenger Side)Front
  • Fits 6 LugsWheels
  • Wheel studs already installed
  • Includes ABS with tegral Sensor

  Item Description:

  • Brand New Wheel Hub Assembly
  • Direct replacement
  • Built to strict quality control standards
  • Replaces dealer part numbers:515036,15863441, FW311, PT515036, 715036, 295-15036PL

  Vehicle Fitment:

  • Note: AWD/ 4WD 6 Lug Models Only
  • Fits Cadillac Escalade 2002-2006
  • Fits Cadillac Escalade ESV 2003-2006
  • Fits Cadillac Escalade EXT 2002-2006
  • Fits Chevrolet Avalanche 1500 2002-2006
  • Fits Chevrolet Express 1500 2003-2014
  • Fits Chevrolet Express 2500 2003-2005
  • Fits Chevrolet Silverado 1500 1999-2006
  • Fits Chevrolet Suburban 1500 2000-2006
  • Fits Chevrolet Tahoe 2000-2006 (2000 BASE-LS-LT 4.8L 5.3L Only)
  • Fits GMC Savana 1500 2003-2014
  • Fits GMC Savana 2500 2003-2005
  • Fits GMC Sierra 1500 1999-2006
  • Fits GMC Yukon 2000-2006 (2000 Excluding Denali)
  • Fits GMC Yukon Xl 1500 Include:
    • (2) Wheel Hub Bearing

    Exploded View:

    1. Wheel hub and bearing
    2. Cotter pin
    3. Nut retainer
    4. Wheel hub lock nut
    5. Hub bolt
    6. Splash guard
    7. Steering
    8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    13. Remove the engine side cover.
    14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
    15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    16. Remove the wheel hub and bearing bolts using power tool.
    17. Remove the splash guard and the wheel hub and bearing from the steering
    18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    19. Pull out the front wheel sensor, being careful to turn it as little as possible.
    20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
    21. Do not reuse the wheel stud.
    22. Do not reuse the cotter pin.
    23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

    6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

    7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

    8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

    9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

    Item SpecificsManufacturer Part Number :ECP070657HKBrand :ECCPPType :Wheel Hub & Bearing AssemblyOE/OEM Part Number :515036Material :SteelSurface Finish :Polished, Rust ProtectedQuantity :2Fitment 1 :Cadillac Escalade 2002-2006 ESV/ EXTFitment 2 :Chevrolet Avalanche 1500 2002-2006; Suburban 1500 2000-2006Fitment 3 :Chevrolet Express 1500 2003-2014; Express 2500 2003-2005Fitment 4 :1999-2006 Chevrolet Silverado 1500; GMC Sierra 1500Fitment 5 :2000-2006 Chevrolet Tahoe; GMC Yukon/ XLFitment 6 :GMC Savana 1500 2003-2014; Savana 2500 2003-2005Note :AWD/ 4WD 6 Lug Models OnlyBolt Pattern :6 x 5.5 in (6 x 139.7 mm)Interchange Part Number :10393163, 15102294, 15112382, 15134584, 15233113, 15740291Anti-lock Braking System :YesABS Sensor :YesBolt Circle Diameter :5.5 in. / 139.7 mmBrake Pilot Diameter :3.09 in. / 78.4 mmFlange Bolt Hole Quantity :3Knuckle Bolt Circle Diameter :4.96 in. / 126 mmKnuckle Bolt Hole Size :M14x1.5Flange Bolts Included :NoFlange Diameter :7.09 in. / 180 mmFlange Offset :1.96 in. / 49.8 mmFlange Shape :TriangleHub Pilot Diameter :3.91 in. / 99.3 mmInside Spline Quantity :33Wheel Pilot Diameter :3.07 in. / 77.9 mmWheel Stud Quantity :6Wheel Stud Size :M14x1.5Wheel Studs Included :YesBearing Type :Tapered BearingBearing Generation :G3 Item SpecificsManufacturer Part Number ECP070657HKBrand ECCPPType Wheel Hub & Bearing AssemblyOE/OEM Part Number 515036Material SteelSurface Finish Polished, Rust ProtectedQuantity 2Fitment 1 Cadillac Escalade 2002-2006 ESV/ EXTFitment 2 Chevrolet Avalanche 1500 2002-2006; Suburban 1500 2000-2006Fitment 3 Chevrolet Express 1500 2003-2014; Express 2500 2003-2005Fitment 4 1999-2006 Chevrolet Silverado 1500; GMC Sierra 1500Fitment 5 2000-2006 Chevrolet Tahoe; GMC Yukon/ XLFitment 6 GMC Savana 1500 2003-2014; Savana 2500 2003-2005Note AWD/ 4WD 6 Lug Models OnlyBolt Pattern 6 x 5.5 in (6 x 139.7 mm)Interchange Part Number 10393163, 15102294, 15112382, 15134584, 15233113, 15740291Anti-lock Braking System YesABS Sensor YesBolt Circle Diameter 5.5 in. / 139.7 mmBrake Pilot Diameter 3.09 in. / 78.4 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.96 in. / 126 mmKnuckle Bolt Hole Size M14x1.5Flange Bolts Included NoFlange Diameter 7.09 in. / 180 mmFlange Offset 1.96 in. / 49.8 mmFlange Shape TriangleHub Pilot Diameter 3.91 in. / 99.3 mmInside Spline Quantity 33Wheel Pilot Diameter 3.07 in. / 77.9 mmWheel Stud Quantity 6Wheel Stud Size M14x1.5Wheel Studs Included YesBearing Type Tapered BearingBearing Generation G3
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    • PayPalpreferred.

    ​

    ​

    
    

    Copyright of eccppautoparts. All rights reserved.

    
    
    
    

    ---