2 Rear Wheel Hub w/ABS For Kia Optima Sportage Rondo Sonata Tucson Hyundai Azera For Sale - New and Used

Item Description:

Item Features

• Condition:New
• Placement on Vehicle：Driver Side or Passenger Side
• Material:steel
• Fitment type:Direct replacement
• Weight:16LB
• Warranty:1 Year
• Fits eitherLH (Driver Side) or RH (Passenger Side)Rear
• Fits 5 LugsWheels

Vehicle Fitment

• Fits Hyundai Azera 2011 - 2016
• Fits Hyundai Sonata 2010 - 2014
• Fits Hyundai Tucson 2009 - 2015
• Fits Kia Cadenza 2014 - 2015
• Fits Kia Optima 2011 - 2015
• Fits Kia Rondo 2008 - 2012
• Fits Kia Sportage 2009 - 2016

Item Include

• 2xwheel hub bearing

2 Rear Wheel Hub w/ABS For Kia Optima Sportage Rondo Sonata Tucson Hyundai Azera

Item Description:

Item Features

• Condition:New
• Placement on Vehicle：Driver Side or Passenger Side
• Material:steel
• Fitment type:Direct replacement
• Weight:16LB
• Warranty:1 Year
• Fits eitherLH (Driver Side) or RH (Passenger Side)Rear
• Fits 5 LugsWheels

Vehicle Fitment

• Fits Hyundai Azera 2011 - 2016
• Fits Hyundai Sonata 2010 - 2014
• Fits Hyundai Tucson 2009 - 2015
• Fits Kia Cadenza 2014 - 2015
• Fits Kia Optima 2011 - 2015
• Fits Kia Rondo 2008 - 2012
• Fits Kia Sportage 2009 - 2016

Item Include

• 2xwheel hub bearing

When do you need to replace

• Poor Clicking, snapping or popping
• Clunking or knocking
• Rumbling, humming or growling
• Wobble and/or wheel vibrations
• Shimmy, shudder, or vibration at constant speeds
• Abnormal side pulling when applying brakes
• Uneven or abnormal tire wear
• ABS failure

How to Install

• 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
• 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
• 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
• 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
• 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
• 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug.
• 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
• 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket.
• 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper.
• 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts.
• 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
• 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
• 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque
• If you have any question about the product, please contact us before buying, we will give you a best reply in time.
• We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or response, we will give you the best
  Item SpecificsBrand autosuperstarManufacturer Part Number 10046862Placement on Vehicle RearOE/OEM Part Number 512437,WA512437,Type Wheel Hub & Bearing AssemblyVintage Car Part NoCondition NewInterchange Part Number WB512437,29512437,712437Bolt Circle Diameter 4.46 inchBrake Pilot Diameter 2.964 inchFlange Offset 2.3 inchItems Included 2pc wheel bearingManufacturer Warranty 1 YearMaterial SteelPerformance Part NoSuperseded Part Number 527301D400, 527303S200Universal Fitment NoWheel Pilot Diameter 2.61 inchFlange Diameter 5.77 inchHub Pilot Diameter 2.84 inchSuface Polished, Rust ProtectedAnti-lock Braking System YesWheel Stud Quantity 5
  Payment

  1.90% packages willbeshippedwithin24 located in CA or NJ or GA (ItemstobeReturnedmustbein brand wewillofferyourefundorreplacement after if order by Us

  Ifthere's anyquestionor problem, docontactus please. Our Customer Servicersare always here to answer the question and solve the problem.

  Note itfitsyourvehicle.
  If there's any question about the conpatibilities, contact us please.
  DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Excellent Delivery
  Shop CategoryStore Home Towing Mirrors 2 pcs Wheel Spacers Wheel Hub Bearing Heater Core 4 pcs Wheel Spacers Door Handle Windshield Wiper Motor Fuel Pump Air Parking Heater Window Regulator Throttle Body Window Switch AC Compressor ABS Wheel Speed Sensor Roof Rack Window Visor AC Condenser Bumper 4 pcs Wheel hub Bearing Tonneau Cover Sun Visor A/C Evaporator Core Spoiler Wing Headlights Assembly Fuel Injector Dash Cover Oil Pan Fender Flares Center Console Timing Belt Kit Timing Chain Kit Door Lock Actuator AC Vent Electric Winch Tow Detonation Knock Sensor Horn OtherHot Item Front Window Switch Bezel For Chevy Silverado GMC Sierra 1500 2500 3500 2004-06 USD 18.39 1 pc Inside Interior Door Handle RH Right Passenger Side For Ford F-150 2009-14 USD 12.59 Door Handle Inside Interior Driver Left LH For Chevy C1500 Truck Suburban K2500 USD 11.96 130PSI 12V Air Compressor Kit For Train Horns Air Horn Air Suspension Kit USD 69.91 4 pcs1.5\" 8x6.5 to 8x180 8 Lug Wheel Spacers Adapter For CHEVY For GMC USD 103.83 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout UsNew List Item 1-7/8\" Ball 2\" Channel Straight Coupler With Chain ZINC 2000LBS USD 37.99 CENTER CONSOLE STORAGE BOX ARMREST ORGANIZER TRAY For TOYOTA 4RUNNER 10-18 USD 29.99 12V 135DB Snail Air Horn Siren Universal For Car Motorcycle Boat SUV RV USD 37.99 2 X Kayak Carrier Rack Canoe Boat Surf Roof Top Mount Bar Rack For SUV USD 112.99 1 X For 2006-2010 Hyundai Sonata Driver Side Mirror Power Heated USD 58.99 2 Rear Wheel Hub w/ABS For Kia Optima Sportage Rondo Sonata Tucson Hyundai Azera

  Item Description:

  Item Features

  • Condition:New
  • Placement on Vehicle：Driver Side or Passenger Side
  • Material:steel
  • Fitment type:Direct replacement
  • Weight:16LB
  • Warranty:1 Year
  • Fits eitherLH (Driver Side) or RH (Passenger Side)Rear
  • Fits 5 LugsWheels

  Vehicle Fitment

  • Fits Hyundai Azera 2011 - 2016
  • Fits Hyundai Sonata 2010 - 2014
  • Fits Hyundai Tucson 2009 - 2015
  • Fits Kia Cadenza 2014 - 2015
  • Fits Kia Optima 2011 - 2015
  • Fits Kia Rondo 2008 - 2012
  • Fits Kia Sportage 2009 - 2016

  Item Include

  • 2xwheel hub bearing

  When do you need to replace

  • Poor Clicking, snapping or popping
  • Clunking or knocking
  • Rumbling, humming or growling
  • Wobble and/or wheel vibrations
  • Shimmy, shudder, or vibration at constant speeds
  • Abnormal side pulling when applying brakes
  • Uneven or abnormal tire wear
  • ABS failure

  How to Install

  • 1.Loosen the lug nuts on the wheel of the hub bearing you're replacing with the breaking bar and a socket
  • 2.Lift the wheel with the floor jack in a safe and secure manner. Support the vehicle on a jack stand
  • 3.Remove the lug nuts and wheel.Locate the caliper bolts and remove them with the ratchet and a socket.
  • 4.Pry the caliper off gently using a large straight-edged screwdriver and support the caliper on the coil spring with a bungee cord.
  • 5.Locate the caliper bridge bolts (if applicable) and remove them with the ratchet and a socket.
  • 6.Remove any ABS wires attached to the hub bearing assembly (if applicable) or unclip the wire and trace it to the plug.
  • 7.Remove the spindle nut with the breaking bar and a spindle nut socket. Remove the washer behind the spindle nut.
  • 8.Locate the wheel-bearing assembly bolts behind the knuckle, and loosen them with the breaking bar and socket.
  • 9.Install the slide hammer onto the lug studs and secure with tightened lug nuts.Sand off the rust and corrosion around the knuckle with a fine- to medium-grade sandpaper.
  • 10.Place the backing plate in its original position and place the new bearing onto the knuckle. Replace the wheel-bearing assembly bolts.
  • 11.Replace washer and spindle nut and tighten to proper torque specifications with the half-inch drive torque wrench and spindle socket.
  • 12.Replace the brakes in the same manner you extracted them. the tire and lug nuts, and tighten the lug nuts as tight as you can get them.
  • 13.Lower the vehicle and tighten the lug nuts in an alternate fashion with the torque wrench and socket at the correct wheel nut specifications torque
  • If you have any question about the product, please contact us before buying, we will give you a best reply in time.
  • We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or response, we will give you the best
    
    PaymentShippingPolicyContact UsNote

    1.90% packages willbeshippedwithin24 located in CA or NJ or GA (ItemstobeReturnedmustbein brand wewillofferyourefundorreplacement after if order by

    Ifthere's anyquestionor problem, docontactus please. Our Customer Servicersare always here to answer the question and solve the problem.

    itfitsyourvehicle.
    If there's any question about the conpatibilities, contact us please.
    
    

    All rights reserved.

    
    
    
    

    ---