Fast-Autos.net


Search for a different part:

ECCPP 2 Pcs Wheel Hub Bearing Front For Chevrolet Malibu Pontiac G6 Saturn Aura For Sale - New and Used


ECCPP 2 Pcs Wheel Hub Bearing Front For Chevrolet Malibu Pontiac G6 Saturn Aura
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.


Buy Now

ECCPP 2 Pcs Wheel Hub Bearing Front For Chevrolet Malibu Pontiac G6 Saturn Aura:
$72.95

  • Product Features:
    • Fits LH (Driver Side) & RH (Passenger Side)Front
    • Fits 5 LugsWheels
    • Wheel studs already installed
    • Includes ABS with tegral Sensor
  • Item Description:
    • Brand New Wheel Hub Assembly
    • Direct replacement
    • Built to strict quality control standards
    • Replaces dealer part numbers:513214 WE60729 BR930317 HA590070 12413083 WB13214 930-612 713214
  • Vehicle Fitment:

  • ECCPP 2 Pcs Wheel Hub Bearing Front For Chevrolet Malibu Pontiac G6 Saturn Aura

    Product Features:

    • Fits LH (Driver Side) & RH (Passenger Side)Front
    • Fits 5 LugsWheels
    • Wheel studs already installed
    • Includes ABS with tegral Sensor

    Item Description:

    • Brand New Wheel Hub Assembly
    • Direct replacement
    • Built to strict quality control standards
    • Replaces dealer part numbers:513214 WE60729 BR930317 HA590070 12413083 WB13214 930-612 713214

    Vehicle Fitment:

    • Fits Chevrolet Cobalt 2008-2010 (SS Models Only w/ ABS)
    • Fits Chevrolet HHR 2008-2010 (SS Models Only w/ ABS)
    • Fits Chevrolet Malibu 2004-20124-Wheel ABS
    • Fits Pontiac G6 2005-2010 4-Wheel ABS
    • Fits Saturn Aura 2007-2009 4-Wheel ABS

    ​​

    Package Include:

    • (2) Wheel Hub Bearing

    Exploded View:

    1. Wheel hub and bearing
    2. Cotter pin
    3. Nut retainer
    4. Wheel hub lock nut
    5. Hub bolt
    6. Splash guard
    7. Steering
    8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
    9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
    10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
    11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
    12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
    13. Remove the engine side cover.
    14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
    15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
    16. Remove the wheel hub and bearing bolts using power tool.
    17. Remove the splash guard and the wheel hub and bearing from the steering
    18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
    19. Pull out the front wheel sensor, being careful to turn it as little as possible.
    20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
    21. Do not reuse the wheel stud.
    22. Do not reuse the cotter pin.
    23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
    24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
    25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

    6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

    7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

    8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

    9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.


    Item SpecificsBrand ECCPPManufacturer Part Number ECP991803HKMaterial SteelSurface Finish Polished, Rust ProtectedABS Sensor Has ABS with tegral SensorPlacement on Vehicle FrontType Wheel Hub & Bearing AssemblyOE/OEM Part Number 513214Quantity 2Fitment 1 2008 2009 2010 Chevrolet Cobalt SS 2.0L ModelFitment 2 2008 2009 2010 Chevrolet HHR SS 2.0L ModelFitment 3 2004 2005 2006 2007 2008 2009 2010 2011 2012 Chevrolet MalibuFitment 4 2005 2006 2007 2008 2009 2010 Pontiac G6Fitment 5 2007 2008 2009 Saturn AuraInterchange Part Number 513214 WE60729 BR930317 HA590070 12413083 WB13214 930-612 713214Bolt Pattern 5 x 110 mmInside Spline Quantity 30Anti-lock Braking System YesBolt Circle Diameter 4.33 in. / 110 mmBrake Pilot Diameter 2.58 in. / 65.5 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.49 in. / 114 mmKnuckle Bolt Hole Size M12x1.75Flange Bolts Included NoFlange Shape TriangleFlange Diameter 5.39 in. / 137 mmFlange Offset 1.54 in. / 39 mmHub Pilot Diameter 3.54 in. / 90 mmWheel Pilot Diameter 2.56 in. / 65 mmWheel Stud Quantity 5Wheel Stud Size M12x1.5Wheel Studs Included YesBearing Type Ball BearingBearing Generation G3 Item SpecificsBrand ECCPPManufacturer Part Number ECP991803HKMaterial SteelSurface Finish Polished, Rust ProtectedABS Sensor Has ABS with tegral SensorPlacement on Vehicle FrontType Wheel Hub & Bearing AssemblyOE/OEM Part Number 513214Quantity 2Fitment 1 2008 2009 2010 Chevrolet Cobalt SS 2.0L ModelFitment 2 2008 2009 2010 Chevrolet HHR SS 2.0L ModelFitment 3 2004 2005 2006 2007 2008 2009 2010 2011 2012 Chevrolet MalibuFitment 4 2005 2006 2007 2008 2009 2010 Pontiac G6Fitment 5 2007 2008 2009 Saturn AuraInterchange Part Number 513214 WE60729 BR930317 HA590070 12413083 WB13214 930-612 713214Bolt Pattern 5 x 110 mmInside Spline Quantity 30Anti-lock Braking System YesBolt Circle Diameter 4.33 in. / 110 mmBrake Pilot Diameter 2.58 in. / 65.5 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.49 in. / 114 mmKnuckle Bolt Hole Size M12x1.75Flange Bolts Included NoFlange Shape TriangleFlange Diameter 5.39 in. / 137 mmFlange Offset 1.54 in. / 39 mmHub Pilot Diameter 3.54 in. / 90 mmWheel Pilot Diameter 2.56 in. / 65 mmWheel Stud Quantity 5Wheel Stud Size M12x1.5Wheel Studs Included YesBearing Type Ball BearingBearing Generation G3
    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    • PayPalpreferred.
    • Picture

      Hot Item Universal 12V Low Pressure 5-9 PSI Electric Fuel Pump Installation Kit E8012S USD 16.49 Pair For 2007-2014 Chevy Silverado Sierra Towing Power Heated LED Signal Mirrors USD 125.87 Front Wheel Hub Bearing For Chevy Monte Carlo Impala Cadillac Eldorado DTS FWD USD 40.38 2 For Ford F150 Excursion Ranger 1998 1999 2000-2010 Remote Keyless Entry System USD 7.29 ECCPP 2 Pcs Wheel Hub Bearing Front For Buick LaCrosse Century Regal Lesabre FWD USD 60.95 Shop CategoryStore Home Outer Parts◈Towing Mirrors◈Roof Rack◈Bumper◈Tonneau Cover◈Lift Support◈Pillar Posts◈Rubber Seal Strip◈Jeep Parts◈Windshields◈Door Lock Actuator◈Window Regulator◈Door Handle Covers◈Car Hinges◈License Plate Frames◈Rocker Pannel & Cover Trim◈Car Cover◈Door Handle◈Mud Flaps◈Parking Sensor◈RV & Golf Power Cord◈Window Louver Cover◈Nerf Bars And Running Boards◈Horn◈Hub Caps◈Fender Flares◈Motorcycle Wheel Chock◈Kick Start Lever◈Car Antenna◈Front Bumper Lip◈Stone & Bug Deflector◈Front Bumper Lip Splitter Stru◈Window Visor◈Air Intake Snorkel◈AC Vent◈Spoiler Wing Sensor Series◈Oxygen Sensor◈ABS Wheel Speed Sensor◈Knock Sensor◈Brake Pad Wear Sensor◈Vehicle Speed Sensor◈Sensor◈Tire Pressure Sensor Light products◈Headlight Assembly◈Motorcycle Light◈Fog Light◈Side/Cab Marker Lights◈Instrument Panel Lights◈Third Brake Lights◈Interior Lights◈Exterior Lights◈Led Headlights◈Special Model Lights Inner Parts◈Shift Knob Lever Head◈Car Floor Mats◈Remote Key◈Steering Wheel & Adapter◈Center Console◈Fastener◈Air Cleaner Box Assembly◈Car Seat Cover◈Dash Cover & Cushion◈Cargo Cover◈Sun Visor Suspension System◈ATV Tires◈A Arm Bushing Kit◈Coilover◈Strut Mount◈Shocks Struts◈Complete Strut◈Struts & Suspension Kit & Hubs◈Air Suspension◈Leveling Lift Kits▷Suspension Kits♢Control Arm♢Ball Joints♢Tie Rod End♢Sway Bar♢Suspension kit◈Steering Knuckle◈leveling kit + struts shocks◈steering knuckle-7 Copper Tube◈ATV Brake Master Cylinder◈ATV Brake Caliper◈Brake drum shoe◈Clutch Lever◈Parking Brake Actuator◈Brake rotor pad◈Brake Shoe◈Brake lines kit◈Brake caliper◈Power Brake Booster Drive Shaft And Half Shaft◈Rear Wheel Axle◈Driveshaft◈Wheel Spacers◈C Notch & Flip Kit◈Wheel Hub Bearing◈Wheel Hub Centric Rings◈Wheel Hub Bearing Knuckle◈CV Axle◈CV Axle Boot◈4 Pcs Wheel Hub Bearing Steering System◈Steering U Joint◈Power Steering Pump & Parts◈Power Steering Rack◈Steering Shaft Time Control System◈Timing Belt Kit◈Variable Valve Timing Solenoid◈Timing Chain Kit Cooling System◈Water Pump◈Blower Motor Resistor◈Thermostat Housing◈AC Fan◈Heater Control Valve◈Heater Core◈Coolant Tank◈Water Pump Impeller◈Radiator◈Radiator Hose◈Radiator Support◈Evaporator◈Air Blend Door Actuator Gas Distribution System◈Throttle Body◈Intake Carburetor Boot◈Diesel Emissions Fluid Pump◈Valve Cover◈Hydraulic Lifter & Rocker Arms◈Turbocharger◈Idle Air Control Valve◈Secondary Air Pump Ignition System◈Fuse Box◈Ignition Distributor◈Ignition Coils◈Spark Plug Wire Set◈ATV Ignition Coil◈Wiring Harness◈Glow Plugs◈Ignition Coil & Spark Plug Starting System◈Starter Drive Belt And Device◈Wear Ring◈Primary Drive Clutch◈Serpentine Belt Tensioner Crankshaft And Camshaft◈Harmonic Banlancer◈Camshaft & Crankshaft◈Timing Chain Kit Fuel System◈Motorcycle Carburetor & Parts◈Mass Air Flow Sensor◈Fuel Injectors◈Car Carburetor◈Fuel Pump Assembly◈Oil Fuel Hose◈Fuel Tank Valve & Regulator◈Purge Valve◈Fuel Cell Gas Tank◈Fuel Tank Pipe & Cap◈Vacuum Pump Switches And Electrical◈CDI Box◈Proportioning Valve◈Window Switch◈Stator◈Battery Switch Relay◈Relay Solenoid◈Golf Cart Parts◈Alternator◈Air Suspension Valve Solenoid◈ATV Ignition Switch◈Running Board Motor◈Wiring Harness◈Tilt Trim Motor◈AC Compressor Control Valve◈Remote Control Box◈Windshield Wiper Motor◈Oil Pressure Gauge◈Ballast Module◈Voltage Rectifier Regulator◈Shutdown Solenoid Lubrication System◈Oil Pump◈Engine Oil Cooler◈Oil Pan◈Dipstick Engine Bracket Glue◈Engine Mount Engine Gasket & Cylinder Head◈Boat Jack Plate◈Head Gasket Set◈Cylinder Head◈Cylinder Piston Gasket Kit◈Carbon SealNew List Item ECCPP Cylinder Head Gasket Set For 96-98 Jeep Cherokee Grand Cherokee 4.0L VIN S USD 35.76 LED Turn Signal Tow Mirrors For 03-07 Chevy Silverado 1500 2500HD Power Heated USD 83.79 For Toyota Tacoma Passenger Side RH Sun Visor w Extension Med Gray NEW 2005-2015 USD 24.69 Side View Mirrors Power Heated Towing Turn Signal Pair Set For 07-14 F150 Truck USD 131.39 ECCPP Engine Timing Cover Gasket For 00-06 Lincoln Ford Thunderbird 3.9L DOHC USD 16.36 ECCPP 2 Pcs Wheel Hub Bearing Front For Chevrolet Malibu Pontiac G6 Saturn Aura

      Product Features:

      • Fits LH (Driver Side) & RH (Passenger Side)Front
      • Fits 5 LugsWheels
      • Wheel studs already installed
      • Includes ABS with tegral Sensor

      Item Description:

      • Brand New Wheel Hub Assembly
      • Direct replacement
      • Built to strict quality control standards
      • Replaces dealer part numbers:513214 WE60729 BR930317 HA590070 12413083 WB13214 930-612 713214

      Vehicle Fitment:

      • Fits Chevrolet Cobalt 2008-2010 (SS Models Only w/ ABS)
      • Fits Chevrolet HHR 2008-2010 (SS Models Only w/ ABS)
      • Fits Chevrolet Malibu 2004-20124-Wheel ABS
      • Fits Pontiac G6 2005-2010 4-Wheel ABS
      • Fits Saturn Aura 2007-2009 4-Wheel ABS

      ​​

      Package Include:

      • (2) Wheel Hub Bearing

      Exploded View:

      1. Wheel hub and bearing
      2. Cotter pin
      3. Nut retainer
      4. Wheel hub lock nut
      5. Hub bolt
      6. Splash guard
      7. Steering
      8. Remove the bolt (1) and separate the front wheel sensor from the steering knuckle.?
      9. Remove brake caliper torque member bolts, leaving brake hose attached, reposition the caliper aside with wire.
      10. Put alignment marks (A) on disc brake rotor and wheel hub and bearing. Remove disc brake rotor.
      11. Remove cotter pin and the nut retainer,Loosen the wheel hub lock nut from the drive shaft using power tool.
      12. Using a piece of wood and a suitable tool, tap on the lock nut to disengage the drive shaft from the wheel hub and bearing.
      13. Remove the engine side cover.
      14. Remove the lower nut and bolt from the steering knuckle,Separate transverse link from steering knuckle.
      15. Separate drive shaft from wheel hub and bearing, Reposition the drive shaft aside with wire.
      16. Remove the wheel hub and bearing bolts using power tool.
      17. Remove the splash guard and the wheel hub and bearing from the steering
      18. Failure to separate the front wheel sensor from the steering knuckle may result in damage to the front wheel sensor;
      19. Pull out the front wheel sensor, being careful to turn it as little as possible.
      20. Do not pull on wheel after removel : Check components for deformationy,cracksy,and other damagey,and boots of transverse link ball joint for cracksy,axial end play,and swing is in the reverse order of the
      21. Do not reuse the wheel stud.
      22. Do not reuse the cotter pin.
      23. Place a washer (A) as shown to install the wheel studs (1) by using the tightening force of the nut (B).
      24. Clean the mating surfaces of the joint sub-assembly and the wheel hub and bearing. Apply lubricant to the surface (A) of the joint sub-assembly.
      25. Hold the wheel hub and bearing using a suitable tool. Tighten the wheel hub lock nut

      6. Since the drive shaft is assembled by press-fitting, use a torque wrench to tighten the wheel hub lock nut. Do not use a power tool.

      7. Too much torque causes axle noise. Too little torque causes wheel bearing looseness. Tighten the wheel hub lock nut to the specification.

      8. When installing a the cotter pin (1) and the nut retainer (2), securely bend the cotter pin to prevent rattles.

      9. Align the matching marks (A) on the disc brake rotor and on the wheel hub and bearing.

      Item SpecificsBrand :ECCPPManufacturer Part Number :ECP991803HKMaterial :SteelSurface Finish :Polished, Rust ProtectedABS Sensor :Has ABS with tegral SensorPlacement on Vehicle :FrontType :Wheel Hub & Bearing AssemblyOE/OEM Part Number :513214Quantity :2Fitment 1 :2008 2009 2010 Chevrolet Cobalt SS 2.0L ModelFitment 2 :2008 2009 2010 Chevrolet HHR SS 2.0L ModelFitment 3 :2004 2005 2006 2007 2008 2009 2010 2011 2012 Chevrolet MalibuFitment 4 :2005 2006 2007 2008 2009 2010 Pontiac G6Fitment 5 :2007 2008 2009 Saturn AuraInterchange Part Number :513214 WE60729 BR930317 HA590070 12413083 WB13214 930-612 713214Bolt Pattern :5 x 110 mmInside Spline Quantity :30Anti-lock Braking System :YesBolt Circle Diameter :4.33 in. / 110 mmBrake Pilot Diameter :2.58 in. / 65.5 mmFlange Bolt Hole Quantity :3Knuckle Bolt Circle Diameter :4.49 in. / 114 mmKnuckle Bolt Hole Size :M12x1.75Flange Bolts Included :NoFlange Shape :TriangleFlange Diameter :5.39 in. / 137 mmFlange Offset :1.54 in. / 39 mmHub Pilot Diameter :3.54 in. / 90 mmWheel Pilot Diameter :2.56 in. / 65 mmWheel Stud Quantity :5Wheel Stud Size :M12x1.5Wheel Studs Included :YesBearing Type :Ball BearingBearing Generation :G3 Item SpecificsBrand ECCPPManufacturer Part Number ECP991803HKMaterial SteelSurface Finish Polished, Rust ProtectedABS Sensor Has ABS with tegral SensorPlacement on Vehicle FrontType Wheel Hub & Bearing AssemblyOE/OEM Part Number 513214Quantity 2Fitment 1 2008 2009 2010 Chevrolet Cobalt SS 2.0L ModelFitment 2 2008 2009 2010 Chevrolet HHR SS 2.0L ModelFitment 3 2004 2005 2006 2007 2008 2009 2010 2011 2012 Chevrolet MalibuFitment 4 2005 2006 2007 2008 2009 2010 Pontiac G6Fitment 5 2007 2008 2009 Saturn AuraInterchange Part Number 513214 WE60729 BR930317 HA590070 12413083 WB13214 930-612 713214Bolt Pattern 5 x 110 mmInside Spline Quantity 30Anti-lock Braking System YesBolt Circle Diameter 4.33 in. / 110 mmBrake Pilot Diameter 2.58 in. / 65.5 mmFlange Bolt Hole Quantity 3Knuckle Bolt Circle Diameter 4.49 in. / 114 mmKnuckle Bolt Hole Size M12x1.75Flange Bolts Included NoFlange Shape TriangleFlange Diameter 5.39 in. / 137 mmFlange Offset 1.54 in. / 39 mmHub Pilot Diameter 3.54 in. / 90 mmWheel Pilot Diameter 2.56 in. / 65 mmWheel Stud Quantity 5Wheel Stud Size M12x1.5Wheel Studs Included YesBearing Type Ball BearingBearing Generation G3
      WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
        • PayPalpreferred.

              • Copyright of eccppautoparts. All rights reserved.




                Buy Now



    Search for a different part:


    Related Cars:



    2008 Novitec 599 GTB Fiorano
    2008 Novitec 599 GTB Fiorano

    2002 Porsche 911 Targa
    2002 Porsche 911 Targa

    2007 Ford Shelby GT
    2007 Ford Shelby GT

    2002 Seat Leon Cupra R
    2002 Seat Leon Cupra R

    2011 Subaru Impreza WRX STi
    2011 Subaru Impreza WRX STi

    2011 Lexus LFA
    2011 Lexus LFA

    2010 Ferrari California
    2010 Ferrari California

    2005 Maserati MC12
    2005 Maserati MC12

    2009 Mercedes-Benz SL 63 AMG
    2009 Mercedes-Benz SL 63 AMG

    2007 Mercedes-Benz CLK 63 AMG
    2007 Mercedes-Benz CLK 63 AMG

    Related Items:

    ECCPP 2 Pcs Wheel Hub Bearing Front For Buick LaCrosse Century Regal Lesabre FWD picture

    ECCPP 2 Pcs Wheel Hub Bearing Front For Buick LaCrosse Century Regal Lesabre FWD

    $60.95



    ECCPP 2

    ECCPP 2" Front Leveling Lift Kit For Dodge Ram 1500 2500 3500 Dakota 1994-18 2WD

    $40.95



    ECCPP 2

    ECCPP 2" Front Leveling Steel Lift Kit Fits Chevy Colorado GMC Canyon 2015-2019

    $38.95




    Contact | Copyright Information | Privacy Policy & Terms of Use