1.Fitting the Followingvehicle:1992-1995 Honda Civic1993-1997 Honda Civic del Sol2.Package Includes:1x Front Upper Control Arm And Ball Joint - Passenger Side -K904481x Front Upper Control Arm And Ball Joint - Driver Side -K904491x Front Lower Control Arm - Driver Side -K803281x Front Lower Control Arm - Passenger Side -K803271x Outer Tie Rod End - Passenger Side -ES2943R1x Front Outer Tie Rod End - Driver Side -ES2946L2x Front Inner Tie Rod End -EV2992x Front Sway Bar End Link Arm & Ball Joint Assembly 10x Front Lower Control Arm Tie Rod End Sway Bar For 1992-1995 Honda Civic EV299
1.Fitting the Followingvehicle:
1992-1995 Honda Civic
1993-1997 Honda Civic del Sol
2.Package Includes:
1x Front Upper Control Arm And Ball Joint - Passenger Side -K90448
1x Front Upper Control Arm And Ball Joint - Driver Side -K90449
1x Front Lower Control Arm - Driver Side -K80328
1x Front Lower Control Arm - Passenger Side -K80327
1x Outer Tie Rod End - Passenger Side -ES2943R
1x Front Outer Tie Rod End - Driver Side -ES2946L
2x Front Inner Tie Rod End -EV299
2x Front Sway Bar End Link Arm & Ball Joint Assembly
Interchange Part Installation is Highly carefully check whether the product matches the model before purchasing.Please check above compatibility list to make sure it fits your vehicle.
2.Take note of some of the things that go into product installation.
3.After the buyer purchases, we will send the goods within a short time, so that the buyer can receive satisfactory goods as soon as possible.
4. only allow one tracking number uploaded for one order. you might not get the shipping information in time,Therefore, when you don't get your order completely, please don't worry, and contact me first by message. We will check the situation and respond to you as soon as possible.
Control Arm
Conditions under which the control arm needs to be replaced:
(1)Noise (squeak, crunch, rumble).
(2)Deteriorating driving performance.
(3)Turn increasingly blurred and imprecise.
(4)Uneven tire wear.
Installation site:
The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward.
Function:
The control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses.
Ball Joint
Condition for balljointto be replaced:
If your ball joint fails, you will listen to a strange sound while driving. And that sound may help you to realize that your ball joint has failed and you have to renew them.
Installation site:
In front front drive vehicles, the ball jointis installed between the front axle axle and the wheel. In front and rear drive vehicles, the ball jointis installed between the transmission output shaft and the drive axle main reducer input shaft.
Working principle:
The ball jointis connected to the automobile suspension and steering system through the connection of the ball head shaft and the ball seat, and ensure the fixed connection of the wheel and the body. It is a very important part of the automobile suspension system, and plays a crucial role in the smoothness and safety of the car.
Tie Rod End
Condition that the tie rod needs to be replaced:
If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely.
This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod.
Function:
(1)to prevent the rod body torsion.
(2)Prevent the car from rolling sideways.
(3)improve the smoothness of the car, improve the comfort of driving.
Sway bar
The condition that theSwaybar needs to be replaced:
While driving, the following signs may indicate a faulty sway bar stabilizer link:
(1)Rattling and thumping noises on rough roads.
(2)Imprecise vehicle handling.
(3)Stronger inclination of the vehicle during cornering.
Function and effect:
Sway barstransmits the torsional force between the body and the chassis to the stabilizer of a particular axle.Depending on the design of the front or rear axle, they form the necessary connection for optimal interaction between the wheel guide and the stabilizer. The body roll of the vehicle in the turn is minimal to ensure safe road holding. When the vehicle is in fast turns or in irregular road situations help reduce body roll, while achieving balanced handling and limiting body roll in corners to improve tire adhesion. Simply put, when the car turns at high speed or drives on the uneven road surface, it will be a little twisted, and it is easy to tilt, causing the vehicle to roll over. The function of the balance bar is to improve the stability of the body when turning, so that the car will not tilt excessively.
Item SpecificsBrand OnCarmotorManufacturer Part Number 11131476Universal Fitment NoCustom Bundle YesItems Included Mounting HardwarePlacement on Vehicle FrontType Control Arm & Ball Joint AssemblyInterchange Part Number Part Number control arm car,suspension arm,upper lower control arm ball jointSuperseded Part Number car tie rod end replacement,inner and outer tie rod end,rods endsManufacturer Warranty 1 YearModified Item NoKit or Single Part KitOE Spec or Performance/Custom OE SpecFeatures Easy to ReplaceFinish CoatedMaterial SteelMounting Style Bolt-OnPerformance Part NoColor BlackVintage Car Part NoCotter Pin Hole YesAdjustable NoControl Arm Construction ForgedQuantity 10Pcs
About Us: We are a professional auto-parts shop, we are committed to making the best auto-parts products and providing you with better services and cost-effective prices.If you have any questions, please contact us. Please trust us, we will reply to your questions in a short time, and provide solutions as soon as possible.Payment: 1.Instant Paypal payment is the preferred method of payment.2.Other payments accepted by also can be accepted.3.If you want to change the shipping address, please contact us by messages (We can change the address according to the new address you provide after we check it.)Shipping: 2-8working days in transit.1.Product will be shipped within 1-2 business days after full payment is received and verified.2.All orders will be shipped from our US warehouses.3.Packages will shipped out by the carriers below: USPS、FedEx、UPS、DHL and other carriers.4.If you need an accurate logistics tracking number, contact us and we will provide it as soon as possible.Returns:
30-day free return provided.
1.Return shipping is to be paid by the Buyer.2.Any returning or exchanging item must be in new condition and cannot be tempered.3.Please contact us via email before returning the goods,We will provide a solution as soon as possible.Contact Us: Special Note:WARNING:Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Satisfaction of customers is just our untiring pursuit!Any quesiton or problem, do contact us please. We are always online to answer. Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
About Us:Payment:Shipping:Returns:Contact Us: Shop CategoryStore Home Suspension Kit Shock absorber Complete struts Wheel Hub BearingHot Item Rear Sway Stabilizer Bar Linkage Suspension For 2010-2017 Jeep Compass Patriot USD 18.89 2x Front Lower Control Arm Suspension For 1997-2001 Honda CR-V K640323 K640324 USD 76.98 2pcs Front Lower Control Arm Ball Joint For 1995-2003 CHEVROLET S10 GMC SONOMA USD 88.98 Front Inner Outer Tie Rod Adjusting Sleeve For 1980-1996 Ford F-150 F-250 F-350 USD 60.88 2x Front Lower Control Arms For 2007-2014 Ford Edge Lincoln MKX K620487 K620486 USD 82.78 Picture
New List Item 2pcs Rear Left Right Struts Absorbers Shocks For 2007-2011 2012 Acura RDX USD 53.98 4x Front Lower Ball Joints Outer Tie Rods For 1999-2004 HONDA ODYSSEY ES3669 USD 42.98 Front Inner Outer Tie Rod End Links For MERCEDES-BENZ ML320 ML350 ML430 ML500 USD 51.98 2x Front Stabilizer Sway Bars Links For Ford Crown Victoria Lincoln Town Car USD 28.98 2x Front Steering Inner Tie Rod End For 2002-2007 Suzuki Aerio EV800440 USD 29.98 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us 10x Front Lower Control Arm Tie Rod End Sway Bar For 1992-1995 Honda Civic EV299
1.Fitting the Followingvehicle:
1992-1995 Honda Civic
1993-1997 Honda Civic del Sol
2.Package Includes:
1x Front Upper Control Arm And Ball Joint - Passenger Side -K90448
1x Front Upper Control Arm And Ball Joint - Driver Side -K90449
1x Front Lower Control Arm - Driver Side -K80328
1x Front Lower Control Arm - Passenger Side -K80327
1x Outer Tie Rod End - Passenger Side -ES2943R
1x Front Outer Tie Rod End - Driver Side -ES2946L
2x Front Inner Tie Rod End -EV299
2x Front Sway Bar End Link Arm & Ball Joint Assembly
Interchange Part Installation is Highly carefully check whether the product matches the model before purchasing.Please check above compatibility list to make sure it fits your vehicle.
2.Take note of some of the things that go into product installation.
3.After the buyer purchases, we will send the goods within a short time, so that the buyer can receive satisfactory goods as soon as possible.
4. only allow one tracking number uploaded for one order. you might not get the shipping information in time,Therefore, when you don't get your order completely, please don't worry, and contact me first by message. We will check the situation and respond to you as soon as possible.
Control Arm
Conditions under which the control arm needs to be replaced:
(1)Noise (squeak, crunch, rumble).
(2)Deteriorating driving performance.
(3)Turn increasingly blurred and imprecise.
(4)Uneven tire wear.
Installation site:
The control arm connects the hub and the frame of the car. There are ball joints on the hub side and bushings on the frame side to achieve up and down instead of forward and rearward.
Function:
The control arm is used to transmit the required supporting force of the wheel and to withstand all the front and rear direction stresses.
Ball Joint
Condition for balljointto be replaced:
If your ball joint fails, you will listen to a strange sound while driving. And that sound may help you to realize that your ball joint has failed and you have to renew them.
Installation site:
In front front drive vehicles, the ball jointis installed between the front axle axle and the wheel. In front and rear drive vehicles, the ball jointis installed between the transmission output shaft and the drive axle main reducer input shaft.
Working principle:
The ball jointis connected to the automobile suspension and steering system through the connection of the ball head shaft and the ball seat, and ensure the fixed connection of the wheel and the body. It is a very important part of the automobile suspension system, and plays a crucial role in the smoothness and safety of the car.
Tie Rod End
Condition that the tie rod needs to be replaced:
If you feel a bump in the steering when driving over road bumps or curbs, this might be due to worn tie rod ends or inner tie rods. Clicking noises during sudden steering movements can also be symptoms of a defective tie rod. In order to determine the exact cause and replace the defective tie rod, the car must be elevated with a vehicle lift in order to be examined more closely.
This useful tip applies to the exchange of tie rod ends and inner tie rods, which together form the so-called tie rod.
Function:
(1)to prevent the rod body torsion.
(2)Prevent the car from rolling sideways.
(3)improve the smoothness of the car, improve the comfort of driving.
Sway bar
The condition that theSwaybar needs to be replaced:
While driving, the following signs may indicate a faulty sway bar stabilizer link:
(1)Rattling and thumping noises on rough roads.
(2)Imprecise vehicle handling.
(3)Stronger inclination of the vehicle during cornering.
Function and effect:
Sway barstransmits the torsional force between the body and the chassis to the stabilizer of a particular axle.Depending on the design of the front or rear axle, they form the necessary connection for optimal interaction between the wheel guide and the stabilizer. The body roll of the vehicle in the turn is minimal to ensure safe road holding. When the vehicle is in fast turns or in irregular road situations help reduce body roll, while achieving balanced handling and limiting body roll in corners to improve tire adhesion. Simply put, when the car turns at high speed or drives on the uneven road surface, it will be a little twisted, and it is easy to tilt, causing the vehicle to roll over. The function of the balance bar is to improve the stability of the body when turning, so that the car will not tilt excessively.
Item SpecificsBrand :OnCarmotorManufacturer Part Number :11131476Universal Fitment :NoCustom Bundle :YesItems Included :Mounting HardwarePlacement on Vehicle :FrontType :Control Arm & Ball Joint AssemblyInterchange Part Number Part Number :control arm car,suspension arm,upper lower control arm ball jointSuperseded Part Number :car tie rod end replacement,inner and outer tie rod end,rods endsManufacturer Warranty :1 YearModified Item :NoKit or Single Part :KitOE Spec or Performance/Custom :OE SpecFeatures :Easy to ReplaceFinish :CoatedMaterial :SteelMounting Style :Bolt-OnPerformance Part :NoColor :BlackVintage Car Part :NoCotter Pin Hole :YesAdjustable :NoControl Arm Construction :ForgedQuantity :10Pcs
About Us: We are a professional auto-parts shop, we are committed to making the best auto-parts products and providing you with better services and cost-effective prices.If you have any questions, please contact us. Please trust us, we will reply to your questions in a short time, and provide solutions as soon as possible. Payment: 1.Instant Paypal payment is the preferred method of payment.2.Other payments accepted by also can be accepted.3.If you want to change the shipping address, please contact us by messages (We can change the address according to the new address you provide after we check it.) Shipping: 2-8working days in transit.1.Product will be shipped within 1-2 business days after full payment is received and verified.2.All orders will be shipped from our US warehouses.3.Packages will shipped out by the carriers below: USPS、FedEx、UPS、DHL and other carriers.4.If you need an accurate logistics tracking number, contact us and we will provide it as soon as possible. Returns:
30-day free return provided.
1.Return shipping is to be paid by the Buyer.2.Any returning or exchanging item must be in new condition and cannot be tempered.3.Please contact us via email before returning the goods,We will provide a solution as soon as possible. Contact Us: Special Note:WARNING:Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Satisfaction of customers is just our untiring pursuit!Any quesiton or problem, do contact us please. We are always online to answer. Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
All rights reserved.
